R32 Gtst Suspension Parts

[jvs007]

looking at sum handling/suspension parts from just jap. any1 here used them or had experience with sum of their parts. they have a brand called jjr, pretty sure its their own brand, jus wanna know how they perform. also they have engine dampers, opinions on this wud be good too.

cheers

[chinkeboi]

JJR = Just Jap Racing = their own brand.

Their stuff are china products relabelled with their stamp.. regardless.. they wouldnt brand their own name onto these china products unless they were decent.

[HRthirtyone]

if you have ever made the mistake of buying cheap parts with cheap rose joints that f##k out after 5-10,000kms and get really sloppy and noisy, you would value quality, and not buy cheap crap.

Having said that i do not know the quality of Just Jap Suspension parts.

they are more than likely locally made with some parts being cheap taiwan/chinese stuff.

[Sydneykid]

Try the Group Buy, a far superior solution

http://www.skylinesaustralia.com/forums/in...showtopic=85591

cheers

[Simon-S14]

FWIW i bought a paid of rear camber arms from Just Jap, installed them, drove round the block then jacked car up again to retension all fittings and i noticed not one but both arms had cracked in crutial points in their welds...

Horrible products and even worse customer service... i got my money back in the end but not after being labled "an arsehole customer" and a hell of a wait.

i for one wont ever EVER recommend them

[salad]

Dont skimp on suspension bits. If a stock arm can fail, I have no doubt that a cheap aftermarket arm can fail. If you're doing pretty high speeds on a track, your suspension is definitely something that you dont want to fail...

I can also back the SK groupbuy stuff. The shocks are amazing and they work incredibly well with the other things. If there was anything I was to recommend, it would be the SK groupbuy.

[Roy]

So you have had stock arms fail too? MY rear upper arms yielded around the bush. Giving me interesting geometry and causing the wheel to rub.

Scary thing is i didnt really notice to drive the car except i heard the rubbing. When i got to where i was going i checked it and saw the arm giving way. Good thing it happened when it did as the next day i was going to a Motoconcepts Eastern Creek day.

So late night by BD4s replacing the arm and welding gussets to both left and right arms to stop it from happening to my current set.

So std or aftermarket it can happen.

So rather then just right off one option, i woudl firstly ask what you are hoping to get from putting in susp stuff? You want it to feel nicer on the road. You want it to handle better? You wantt o fix an alignment issue sinc eyou have lowered the car? You want to track it ???

[jvs007]

looking for tie rod ends, small rubber boot has split and also need the bushes on the swaybar mounts. the mounts/links on the end of the swaybar are also looking pretty dodgy, gotta chang it.

the other thing they had was engine damper kits.