Jump to content
SAU Community

Recommended Posts

http://www.fullboost.com.au/records.php?class=19

Drag Radial RWD 6-cylinder

Cars must run treaded radial street tyres. Maximum tyre size limited to 275mm sidewall stamping. Mini tubbing is allowed. No chassis cars. Gasoline fuel types only.

1 VIC Kris Velkovski Holden Torana LC - CGMFLY Nissan RB30 CP 9.96 137

2 VIC Ryan Quinn Nissan Skyline R33 GTS-t - OBEHVE Nissan RB25 CP 10.12 136.30

3 NSW Shane Crichton Toyota Cressida MX83 Toyota 1JZ-GTE WS 10.17 137.41

4 QLD Keith Lawrence Holden VL Calais - MAXPSI Nissan RB26 WB 10.35 135.87

5 QLD Mathew LeGrand Toyota Supra JZA80 Toyota 2JZ-GTE WB 10.419 138.08

6 NSW Nabil Morcos Toyota Supra JZA80 Toyota 2JZ-GTE WS 10.46 131.10

7 VIC Jason Ghiller Ford Falcon XE Ford AU 4.0-litre HP 10.51 132

8 NSW Brett Grabham Nissan Skyline R33 GTS-t Nissan RB26/30 WS 10.557 130.34

9 VIC Dave Hanna Ford Falcon BA XR6 Ford 4.0-litre HP 10.587 130.43

10 WA Jos Oosterwaal Nissan 180X S13 Nissan RB26 PM 10.67 130.80

http://www.hpi.com.au/drag_records.php

The records below are for Japanese cars in Australia running treaded radial tyres. Note that times recorded with methanol or nitro-based fuels are not included.

RWD over 2400cc

Car Engine Capacity Compressor Nitrous Tyres

ET 60ft MPH Track Driver Workshop

1 JZA80 Supra 2JZGTE 2997cc T88H-38GK No BFG 295/50R15

10.04 2.23 150.3 Wllbnk Carlos Novais Millennium Motorsports

2 R33 Skyline GTS25t RB25DET 2498cc ATP600 No M/T 255/50R16

10.12 1.64 136.6 Calder Ryan Quinn ATP/Bresciani

3 1991 Cressida 1JZ-GTE 2491cc garret t51R Yes M/T 255/50R16

10.317 1.596 135.32 WSID Shane Crichton RX Eng./Premier 3

4 JZA80 Supra 2JZGTE 2997cc T88-34D No MT255/50R16

10.419 1.683 138.08 willowbank Mathew LeGrand GTAuto Garage

5 JZA80 Supra 2JZGTE 2997cc T88H-34D Yes BFG Comp TA 275/75R15

10.46 1.66 131.1 WSID Nabil Morcos C&V

6 Mazda MX5 13B 26166cc GT35R No M/T 235/60R15

10.48 1.599 128.49 WSID Lee Docherty NFS Racing

7 R33 Skyline GTS25t RB30/26 2996cc T51RKAibb No M/T 235/60R15

10.557 1.795 130.34 WSID Brett Grabham Steve\'s Automotive/JEM

8 180SX RB26DETT 2597cc GT3540 No M/T 255/50R16

10.67 1.63 130.8 Kwinana Jos Oosterwaal Esso Ord St

9 Z32 300ZX VG30DETT 2994cc S15x2 No BFG Comp TA 275/50R15

10.709 1.672 139 WSID John Penlington Unique Autosports

10 1972 Crown Coupe 1FZ-FE 4497cc GT42 No BFG 275/60R15

10.745 1.879 133.25 AIR Sean Gannon Self

1 JZA80 Supra 2JZGTE 2997cc T88H-38GK No BFG 295/50R15

10.04 2.23 150.3 Wllbnk Carlos Novais Millennium Motorsports

The ET for this car still shocks me - when are they running it again?!?!? Should be almost a whole second quicker.

The ET for this car still shocks me - when are they running it again?!?!? Should be almost a whole second quicker.

car was built to use transbrake and nos

this pass was completed with no trans brake just walking it off the line, it didnt see boost till about 70 feet.

carlos has sold the radials and is now running slicks, he has a goal of around 8.7 and high 150 mph trap speed.

i was hoping he would stick with the radials and give theo some one to play with, but he has no passion for the street tyres.

also the car weighed 3600 pounds when he ran 150 mph. and that was with a T88, his current turbo is much larger.

  • 1 month later...
Drag Radial RWD 6-cylinder

Cars must run treaded radial street tyres. Maximum tyre size limited to 275mm sidewall stamping. Mini tubbing is allowed. No chassis cars. Gasoline fuel types only.

NOS is fine under this category?

10.008et at 139.99 is now the top off the list. i ran that at the sport compact meet last weekend. this was first pass off the trailer with only 23 psi on board and on another pass ran 143.33 mph.

we have to sort the torque convertor out as it doesnt like the extra torque of the 3liter bottom end. so with the boost up i am looking forward to mid nines and around 150 mph

shane

10.008et at 139.99 is now the top off the list. i ran that at the sport compact meet last weekend. this was first pass off the trailer with only 23 psi on board and on another pass ran 143.33 mph.

we have to sort the torque convertor out as it doesnt like the extra torque of the 3liter bottom end. so with the boost up i am looking forward to mid nines and around 150 mph

shane

Shane,

Are you looking at getting the car off the line quicker (60 foot) or just getting the converter to lock up better and down the track?

Shane,

Are you looking at getting the car off the line quicker (60 foot) or just getting the converter to lock up better and down the track?

at this stage just better down the track, it slipped all weekend at the sport compact meet and ultimately cost us going a nine at that event.

the car has 145 mph in it the way it sits with a fully functioning convertor, so i need to get the convertor to handle what we have now and another 200 hp or more as we are only just at the bottom of the efficiency range of this turbo.

as far as sixty foot goes. on the weekend the 10.00 it 1.68 sixty footed the rest were 2.0's and worse. this was due to not enough gas.

so it needs a bit more gas with this stall speed and a more efficient convertor that will hold the power and it will come together.

at 3500 pounds its never going to look exciting off the line. i would be happy with low 1.6's to high 1.5's

  • 2 months later...
  • 1 month later...
  • 1 year later...

the 10.1 from obehve wasn't on slicks, that time was run on a street legal M/T. yes, its a mickey thompson but its still a full street legal radial :)

the only time obehve has run on full slicks was years ago and he ran a 10.3, with more impovements from atp and danny at initial d racing the car is running better times

with a full street trim setup

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
    • Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
×
×
  • Create New...