Jump to content
SAU Community

Recommended Posts

generally my experience as a mechanic that if you hear that noise from your shocks.....its because there leaking an not doing there job properly, and standard shocks are fluid filled.

Then they probably arnt standard shocks. Theres a difference between the sound of leaking shocks

over hard bumps and good gas shocks over hard bumps..

I duno, i dont care. All i know is they felt really good, nice and soft/firm considering the height they

sit an r33 at. I just want them GONE! Make an offer somone!

I cannot believe the lack of interest in these WHEELS!! They sit veryy very wide, the rear rims are

completely inline with the guard if not a little outside it! and all 4 rims are in absolute perfect condition.

I need this stuff gone guys just make me some reasonable offers & pick em up!

BOV, Exhaust & Spoilers are now gone!

PARTS LEFT are the Enkei Wheels & GTR Front Bar!!

once again need these gone, no room in the garage!

BUMP, I cant believe no one is jumping on these wheels! Think i may need to take more pictures of how aggressive they sit on the car!

damn shame you arent in syd. i have a set of 18x8.5 and 18x9.5 deep dish rims i wanna swap for staggered sized 17's.

post-32584-1171166910.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Could someone post some pictures of the factory Jack , tools, spare tire and how they were in a 1998 ER34 2 door skyline originally?
    • UPDATE: Hi all!  As we are getting towards the end of this thread where I’ll showcase final dyno numbers and graph, I wanted to provide an update. Tao from HyperGear has done an amazing job building the custom divided T3 housing for the G30. Communication was flawless, price was great, and now the housing is estimated to arrive in 7-10 days! Very very pleased. I must add, if someone is looking for an affordable turbo and end up reading this thread, I would recommend HyperGear. Genuine brands are the way to go as their proven reliability, predictable performance, and there’s a plethora of information available for specs, flow, and more. This HyperGear recommendation is based on their excellent communication, dedication, and willingness to listen to their customers. I particularly liked their ability to create custom adaptations tailored to specific needs, which is a HUGE benefit over other brands. And if we consider the HyperGear provided dyno results, it adds reassurance knowing their turbos can compete against genuine brands. Next update will be after the dyno!  
    • I've previously seen people post up "dress up bolt kits" for RBs but don't remember seeing them specify the full contents. I can only really suggest you grab the verniers and start measuring, and keep in mind the cam cover and timing cover bolts are both quite specific with a wider unthreaded section where the bushes sit, that will make it hard to get aftermarket replacements which tend to be all thread (set screws) or for longer bolts a flat section with a shorter threaded section at the end
    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
×
×
  • Create New...