Jump to content
SAU Community

Recommended Posts

Hey i thought ill share my story with you guys. I went 2 autobarn on wednesday to purchase my IBC Gizzmo ebc and i thought just to save myself the trouble ill get it done. As i work night shift i thought ill drop it off when they open up. I have had some work done to the car at this autobarn before so i thought well they did a good job with the alarm and sub so they know what they are doing. The guy comes out with me and the usual ask me where i want it mounted i showed him and he said "no prob mate". I told him to take care of my baby and in his words he said "always do".

I went home to get some sleep before work. They phone me up to come pick up my car so all excited i go down to pick it up. Pick it up pay and off i go. I made sure the controller was adjusted all the way down. I take it for a drive and notice that the boost is hitting like 16psi before i crapped myself and lifted my foot because its a stock R33 s2 turbo and are rated 2 13psi from what i know. I get home and open the bonnet to c if a vacuum pipe might have come off. I grab the install/operating guide to check something. When i did this i realised that the have connected the solenoid up wrong. It was connected up as a external wastegate.

I phone them up and tell the umm you guys connected it up wrong. He says no worries bring it back and we'll fix it up. We will only b 10 minutes. One and a half hour later he comes back into the shop and says well they connected it up right now and its still boosting to 20.6psi. When he said that i almost had a heart attack. Then he goes and by the way i have a feul cut at 20.6psi. I almost slapped the s.o.b. He then tells me that the put the compresser on the wastegate through the solenoidand it only moves at 20psi.

I said to him well its a 6pound actuator, so either its connected up wrong again or you farked it up. The y bring the car round to the front and the manager comes out and has a look coz he was on the phone with the guy from Gizzmoi have another look at the manual and see that they connected it up wrong again.

The manager connects it up right this time and i drive home. And will you believe it the turbo was only boosting to 6psi like i said. So i thought it was fixed now and tried adjusting it. This didnt work. I turned the boost all the way up and still nothing. I get home steaming. Phone them up and said to them Listen mate its only boosting 6psi like i said, but now it doesnt want to adjust then i said to him you guys can sort this shit out tommorrow coz i have to got get some sleep coz ive been up all day trying to sort this shit out.

The next day i wake at 4 in the afternoon. A bit calmer now and decide to take another look at the boost control. I phone them up again and ask the manager whether they might have farked up the solenoid when they connected it up wrong. Its possible he says, come down and ill give you another one to try. I go down and grab one, come home and swap them around. And bam. It boosts and adjusts. I take the stuffed one bak and tell them it was the solenoid.

CONCLUSION DRAWN FROM THIS FEATURE OF EVENTS IS FROM NOW ON ILL DO IT MYSELF OR GET A SPECIALIST TO DO IT AND NOT ASSUME THAT A INSTALLER KNOWS WAT HES DOING!!!!!!!

Link to comment
https://www.sau.com.au/forums/topic/153696-my-ebc-blues/
Share on other sites

Arhhh gess Franky...

Thats unlucky, not often you get a busted solinoid...

As for the guys at autobarn, I guess they are good at some stuff and not so good at others...

Boost controllers are a pretty easy install, but a busted solinoid would certainlly make one scratch their head...

Yeah keep that turbo on 13psi and she will last for years...

Link to comment
https://www.sau.com.au/forums/topic/153696-my-ebc-blues/#findComment-2858545
Share on other sites

So you bought ebc though them right ? You would have been screwed if you bought the unit somewhere else. Im convinced now ill install my ebc myself.

yeah i bought it off them, and yeah man trust me do it yourself.

Link to comment
https://www.sau.com.au/forums/topic/153696-my-ebc-blues/#findComment-2860906
Share on other sites

  • 1 month later...

WELL!!!! I was Bayside Performance Services yesterday to fit my new fuel pump. Pump works great fuel problem a thing of the past. But while on the dyno the bloody ebc wouldnt adjust. Could not get higher than 10psi. Manages 145rwkw at 10psi but i want more boost. So off i went to autobarn to tell them about my problem with the ebc, since i got it i have just have problems with it.

I asked for a refund for the ebc and got it, YAY!! Im taking that refund money plus a bit more and buying a GREDDY ebc. So im ripping the GIZZMO ebc out on saterday and taking it back and getting my GREDDY ebc and putting it in. Hopefully it will work. So i will update again on saterday and go for a power run next week on 13psi, 14.5psi and 16psi and see wat i make.

Link to comment
https://www.sau.com.au/forums/topic/153696-my-ebc-blues/#findComment-2947003
Share on other sites

you do have an aftermarket dump pipe yes? if not, boost will almost certainly taper off at higher levels.

also, do yourself a favour and f**k the solenoid off altogether.. all it does is get in the way (unless of course this is one of those controllers that stepper the stock solenoid).

Connect your EBC direct between your intercooler piping and wastegate actuator.. the stock solenoid is only useful for a stock setup.

Link to comment
https://www.sau.com.au/forums/topic/153696-my-ebc-blues/#findComment-2947040
Share on other sites

Far out... these guys hit 20psi with your standard turbo? Man they're car audio fitters, they should stick to that, i can't belive they're fitting coolers and all these little gizmo's n shit when they don't know.. for all we know they probably shorted out the solenoid causing it to shit itself.. cos they had a 16yr old working on it... not to mention they went for a bust in your car and hit 20psi... bastards!

Link to comment
https://www.sau.com.au/forums/topic/153696-my-ebc-blues/#findComment-2947108
Share on other sites

WELL!!!! I was Bayside Performance Services yesterday to fit my new fuel pump. Pump works great fuel problem a thing of the past. But while on the dyno the bloody ebc wouldnt adjust. Could not get higher than 10psi. Manages 145rwkw at 10psi but i want more boost. So off i went to autobarn to tell them about my problem with the ebc, since i got it i have just have problems with it.

I asked for a refund for the ebc and got it, YAY!! Im taking that refund money plus a bit more and buying a Blitz ebc. So im ripping the GIZZMO ebc out on saterday and taking it back and getting my BLITZ ebc and putting it in. Hopefully it will work. So i will update again on saterday and go for a power run next week on 13psi, 14.5psi and 16psi and see wat i make.

Are sure the Gizzmo was setup right?

Most people don't like them because they simply dont read the manual, its setup is different to most EBC's.

Who tuned it at BPS? Clint?

Link to comment
https://www.sau.com.au/forums/topic/153696-my-ebc-blues/#findComment-2947268
Share on other sites

LOL! +100000000 for that one

Its like this. I didnt know bout chris rogers at the time I purchased the bionic wheelchair and the insuro mob insisted i have an alarm. I dutifully rocked up to the barn and shelled out for an alarm and a timer and i am due to have it installed monday.

I met chris at the glen on tuesday night and he offered to try and steal the car. If he could he will then set it up so he cant. So even if it costs me a little more to make it right it will be worth it. Specially after reading bout so many purloined lines. :nyaanyaa:

Link to comment
https://www.sau.com.au/forums/topic/153696-my-ebc-blues/#findComment-2947660
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...