Jump to content
SAU Community

Recommended Posts

Dont flame me .. I just asked a audio expert .. An installer not a seller

Dynamatt doesnt do much .. It reduces slight vibration but cheaper options also work well .. In his opinion he said its not worth it .. Oh this was in the boot .. in the doors hes all for it .. but still says its better just to do the surrounds to reduce weight ..

Out of interest, what were the cheaper options he mentioned?

well one was expanding foam (rookie told me that one and no way I would do it ..)

He explained padding foam would work if its hard packed and making sure everything is tight... He told me cheaper version will do just as good but we had the system running (boot closed) I grabbed the spoiler to shut the thing up and he said thats what dynamat will do.. It was a noticable difference but not $100-200 worth of it .. even tho the system it worth 50 times that much he still didnt feel you would hear the effects in the cabin ..

Edited by DECIM8

Dynamat is not made to reduce rattles, unless you use the one thats specifically designed to reduce rattles.

I would tell your installer mate to go back to school and have a few more lessons in dynamat and reduction of road noise.

Also EXPANDER FOAM do you even begin to understand the catastrophis results EXPANDER FOAM will have on your panels when it starts expanding? Its been known to warp the cars panels.

George

Edited by Adelaideprosound

Im just preachin his word... Obviously he'd know something.. hes been in the business for 10 yrs so I dont know..

Everyones got a opinion so i guess thats his .. not that I dont believe u either but id like to hear before I buy..

One more thing I doubt hes studied it hes just used it and felt it was worth less..

Well i use it and have demonstrated the differences time and time again. So i dont mean to sound arrogant but perhaps he was using it to STOP RATTLES not to REDUCE ROAD NOISE.

Dynamat is proven all over the world as being worth its weight in gold, and is being used by every single high end installation expert and SQ nut.

Lets agree to disagree, but when applied correctly and utilised properly Dynamat does a LOT.

How much would it cost to do a DECENT sound deadening job (diy of course)?

I knwo that everyone's decent has a different meaning, but lets just say such that the car becomes significantly quieter so that you can actually hear it. Not like a 1db drop that can only be detected using a db metre.

Would that just be doing both doors?

possibly parts of the boot/rear quarters?

underneath the rear seat?

rear seat sides?

floor?

roof?

behind dash?

$300ish for dynamat bulk pack, dynaxorb and a bottle of prepsol.

the rest is elbow grease.

a bulk pack should do both doors and leave you enough to get stuck into the boot and some under the rear seats if you haven't had enough fun yet.

alternatively, phone a friend and you could probably do the doors on two cars (with more dynaxorb for the other car) and see how it sounds.

if you want to go further at a later date then save up and buy another pack of dynamat and a few beers.

$300ish for dynamat bulk pack, dynaxorb and a bottle of prepsol.

the rest is elbow grease.

a bulk pack should do both doors and leave you enough to get stuck into the boot and some under the rear seats if you haven't had enough fun yet.

alternatively, phone a friend and you could probably do the doors on two cars (with more dynaxorb for the other car) and see how it sounds.

if you want to go further at a later date then save up and buy another pack of dynamat and a few beers.

best way :laugh:

or work it on this: 88/hr average 3-4 hours to do a car and a box of dmat.

Well i use it and have demonstrated the differences time and time again. So i dont mean to sound arrogant but perhaps he was using it to STOP RATTLES not to REDUCE ROAD NOISE.

Dynamat is proven all over the world as being worth its weight in gold, and is being used by every single high end installation expert and SQ nut.

Lets agree to disagree, but when applied correctly and utilised properly Dynamat does a LOT.

Just to respond I dont disagree with u .. from the info i got it was exactly as you say worth its weight in gold. But hey I might give that gear a go neways with a 40kg enclosure in the boot aint like 10kg is gonna hurt my ride any more ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The fuel pump bracket just slides straight up.  Below is a pic I stole off a site. But basically put hand in for fuel pump, wiggle it all about a bit while pulling up. 
    • Went digging Duncan, there's another "item" that sits down under the plenum that the second pipe from the IACV goes down to. I believe that's the one that is apart of the cold start portion, and it then comes back up under the middle of the factory top plenum. I believe you will find it is unneeded on the forward facing plenum on Cheryl.   I just went digging further for some pics on the location of the one way check valve, and found something that confirms my thoughts from the first half of this point. I feel you can just block off that port that is coming down.     I can also confirm, the other line that you were thinking for vacuum that will just need a one way valve put into Cheryl is 100% correct too. The one way valve is normally screwed into the back of the factory inlet plenum.
    • You’re an absolute legend man. Cheers.  
    • The rule of thumb for any GTR thats doing a single turbo conversion is..... seqy... and when i say seqy, i dont mean the pos PPG either. *flamesuit on*
    • The ECU does care - it runs the engine as two banks of 3 wrt O2 trimming. So you have to give it the right one. Um....look at the engine bay pictures in the GTR manual? I think you can make them out there. I think the physical wiring diagram might also help.... Actually, I just looked at the engine bay wiring diag. It clear shows the shapes of the connectors. I'd say that R means rear. According to the rest of that diagram, pin 2 of the R one turns up at terminal 55 of the ECU. Which is.....the rear one.
×
×
  • Create New...