Jump to content
SAU Community

Recommended Posts

looking for fog lights to fit these holes pictured below.. any help would be good.. not necessarily after two.. just one would do.. would prefer to have the tacky looking yellow plastic look..

cheers, tushar

post-40010-1190510234_thumb.jpg

  • 1 year later...

Any chance you have a inside drivers-side headlight for an 1987 Nissan Skyline,R31? The headlight is the square one that fits between the main rectangular headlight and the grill.

Thanks

Neil

I have a whole lot of Nissan lights I'm selling. If what your looking for isn't listed here I still may have it. Because of the amount of lights I've got if your interested could you pm me, with a good description or a Nissan part number or a pic of what you want. I can also send you back pictures showing the condition of my lights. BTW I'm located across the ditch in New Zealand... Shipping isn't to bad to Australia . On average its about $25 to $30 for a set tail lights and a little bit more for big headlights.

Skyline:

* I have one set of DR30 / HR30 Tail lights ( The late Japaneses ones) Apparently they go for between $400 and $700 a set ( http://www.skylinesaustralia.com/forums/lo...hp/t57858.html) Is that a reasonable figure to be asking for them?)

* Also a couple of sets the hot plate style r30 tail lights.

* The late r30 square type tail lights

* R31 square type tail lights

* R31 late (striped kind)

* A DR30 headlight

* HR30 Headlights

* One R31 Headlight (bug eye kind)

* Several sets of the normal square r31 headlights

* R31 side indicators

* Tail lights off a PC211

* R32 Left headlights

* R32 GTS / GTR Tail lights

* R32 4 door tail lights

* R33 4 door tail lights ( Only left side)

Sorry If any of the codes are incorrect they have been copied from the lights. Which were written on by people dismantling the cars.

I also have lights: Side lights, Head lights, indicators, bumper lights, fog lights, rear lights, tail lights. For the following models Nissan:

180 SX

200 SX

Silvia S13 (all years and models)

Silvia S12, and S11?Laurel

Cefiro ( A31 )

Maxima (J30)

Bluebird ( U11, U12, U13, SSS and )

Pulsar ( N12, N13, N14, Exa, Langley etc)

Gloria

Cedric ( Y30 aka 300C), Y31, Y32 )

March ( Micra) ( K10, K11)

280ZX

300ZX (Z30, Z31, Z32)

Sentra ( B11, B12, B13, B14 )

Stanza

Sunny ( B310, B11, B12, B13, B14)

Older Models:

Datsun 1200, 1600

140 / 160 J sedan

Skyline PC211

Bluebird B910

Silvia S110, S12

Laurel C31 (1981)

Old Pulsar (N10, N12 (exa), N13)

Bluebird (910 and U11, plus some older I think)

260C

100A ( Datsun Cherry?)

Sunny Coupe (1400 RWD)

180 - 200B (N910) (Bluebird 610??)

B310 Coupe

Sunny Sedan RWD

Sunny 120Y RWD

B310 Sunny Stationwagon

Cheers

Matthew

(Sorry about the long post)

  • 2 months later...

Do you still have the headlights for sale mate? chasing front headlights for my r30, also interested in any upgrades prehaps dr30 fronts?

Thanks John - [email protected]

Hey mate...how much for a set of headlights for a R33 series 1...smoked or clear, but would prefer clear. Posted to 4152 aswell.

Cheers

Brendan

  • 2 weeks later...
  • 3 weeks later...
  • 4 months later...
I have a whole lot of Nissan lights I'm selling. If what your looking for isn't listed here I still may have it. Because of the amount of lights I've got if your interested could you pm me, with a good description or a Nissan part number or a pic of what you want. I can also send you back pictures showing the condition of my lights. BTW I'm located across the ditch in New Zealand... Shipping isn't to bad to Australia . On average its about $25 to $30 for a set tail lights and a little bit more for big headlights.

Skyline:

* I have one set of DR30 / HR30 Tail lights ( The late Japaneses ones) Apparently they go for between $400 and $700 a set ( http://www.skylinesaustralia.com/forums/lo...hp/t57858.html) Is that a reasonable figure to be asking for them?)

* Also a couple of sets the hot plate style r30 tail lights.

* The late r30 square type tail lights

* R31 square type tail lights

* R31 late (striped kind)

* A DR30 headlight

* HR30 Headlights

* One R31 Headlight (bug eye kind)

* Several sets of the normal square r31 headlights

* R31 side indicators

* Tail lights off a PC211

* R32 Left headlights

* R32 GTS / GTR Tail lights

* R32 4 door tail lights

* R33 4 door tail lights ( Only left side)

Sorry If any of the codes are incorrect they have been copied from the lights. Which were written on by people dismantling the cars.

I also have lights: Side lights, Head lights, indicators, bumper lights, fog lights, rear lights, tail lights. For the following models Nissan:

180 SX

200 SX

Silvia S13 (all years and models)

Silvia S12, and S11?Laurel

Cefiro ( A31 )

Maxima (J30)

Bluebird ( U11, U12, U13, SSS and )

Pulsar ( N12, N13, N14, Exa, Langley etc)

Gloria

Cedric ( Y30 aka 300C), Y31, Y32 )

March ( Micra) ( K10, K11)

280ZX

300ZX (Z30, Z31, Z32)

Sentra ( B11, B12, B13, B14 )

Stanza

Sunny ( B310, B11, B12, B13, B14)

Older Models:

Datsun 1200, 1600

140 / 160 J sedan

Skyline PC211

Bluebird B910

Silvia S110, S12

Laurel C31 (1981)

Old Pulsar (N10, N12 (exa), N13)

Bluebird (910 and U11, plus some older I think)

260C

100A ( Datsun Cherry?)

Sunny Coupe (1400 RWD)

180 - 200B (N910) (Bluebird 610??)

B310 Coupe

Sunny Sedan RWD

Sunny 120Y RWD

B310 Sunny Stationwagon

Cheers

Matthew

(Sorry about the long post)

hey are you still selling lights cause im in desperate need of a pair of datsun 200B rear tail lights mine are faded and cracked and they dont work so please let me know.

thanks

jason

post-67132-1254634851_thumb.jpg

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...