Jump to content
SAU Community

Recommended Posts

Interesting.. Whats with the 2 lumps in front of each cam shaft on the cam belt then? :P

It was an N/A that I had a look at, I wouldn't have thought the turbo head would be any different.

??? The cas still bolts to the front of the exhaust cam, but it has a different spline

Are there any differences in the 26 and 30 headgaskets?

I have a VVT 25 head thats had the front right water jacket and oil gallery welded up and the water gallery shaped to suit the 30 block.

There appears to be more thicknesses available for off the shelf MLS headgaskets for the 26.

is there any issues running the RB25 gasket with the rb25det head?

obviously the oil feed is different, and will be modified for VCT externally..

Nope. I'm running the Cometic RB25 head gasket on mine without issues (~40,000kms). The price difference between the rb25 and rb26 was considerable at the time. I got mine from memory for $150.

Nope. I'm running the Cometic RB25 head gasket on mine without issues. The price difference between the rb25 and rb26 was considerable at the time. I got mine from memory for $150.

i got mine cheap but not THAT cheap ...

the rb25 cometic im running on the rb25 in the car cost me $330 :D

got some ACL piston rings, so its almost wash and build time :O prob 3 weeks

Thanks for that Cubes.

I've been looking at the cometic and ACL race series MLS gaskets, Prices ive got ranged from 210-350 for an RB30 MLS headgasket.

is there any issues running the RB25 gasket with the rb25det head?

Its not really an issue with a 33 25 VVT head that I've seen but there is a 1-2mm of sealing on a particular spot on the front right water jacket. That is when you use a 30 block.

Just to be on the safe side I tigged the water jacket and VVT gallery up in the head and shaped it to suit the water gallery in the 30 block. Theres a min. 5-6mm of sealing now.

It was a better option that trying to braze weld brass to the side of the block like in this pic.

http://www.users.bigpond.com/twinvl/blockmod2.jpg

I heard the Non turbo rb30 pistons have less rings or sumting like that.. and dont cope with boost very well...

wen i was gonna turbo my rb30e, i was being told that the compression had to be lowered a fair amount from 9.0:1 to around 7 or 8:1 to stop pinging and detonation...

Why is it ok for a hybrid motor to have higher compression ratios? wont it ping/knock its tits off??

Jimbo

Whoever told you that didn't know what they are talking about

I heard the Non turbo rb30 pistons have less rings or sumting like that.. and dont cope with boost very well...

wen i was gonna turbo my rb30e, i was being told that the compression had to be lowered a fair amount from 9.0:1 to around 7 or 8:1 to stop pinging and detonation...

Why is it ok for a hybrid motor to have higher compression ratios? wont it ping/knock its tits off??

Jimbo

I heard the Non turbo rb30 pistons have less rings or sumting like that.. and dont cope with boost very well...

wen i was gonna turbo my rb30e, i was being told that the compression had to be lowered a fair amount from 9.0:1 to around 7 or 8:1 to stop pinging and detonation...

Why is it ok for a hybrid motor to have higher compression ratios? wont it ping/knock its tits off??

Jimbo

putting the 25/26 head on actually lowers the compression!

Why is it ok for a hybrid motor to have higher compression ratios? wont it ping/knock its tits off??

1. Because its a hybrid motor. Better designed head that allows you to get away with a little more static comp. :)

2. Its all in the tuning. Simply throw a stock rb30et ecu on an rb30e that has a turbo bolted on to the side of it and try to push 14psi through it and it will almost certainly detonate. So tuning tuning tuning.

So the guys running the R32 RB25DE heads. What sort of power are you guys putting through the inelt manifolds...has anyone gone to an aftermarket one and noticed an improvement in response/power

Hey fancy seeing you in these neck of the woods. :whistling:

AM-Performance is about to drop an aftermarket plenum on his within the next week or two.

Sky30 pushed 312rwkw through his r32 rb25de head running the stock exh. manifold and stock inlet manifold/plenum.

Thats the highest I know of on the R32 RB20/25 style plenum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Gosh these Rb pulleys/alternator or whatever is causing the problem is absolute rubbish lol. Haven't even done that many km on it.
    • Yeah man, will only progress further hopefully. The bonnet is coming off to get sprayed very soon
    • Once the belt slips it can very easily cause a cascade that encourages more belt slip. Check the pulleys carefully and see if the grooves have cupped. If it has it's time to replace the pulleys. If the rubber has glazed you also need to replace it. Shouldn't be shiny. From the factory there's a lot of exposed fibers(?) on a v-belt that will go away as it's broken in but some should still remain visible without sticking out significantly like a new belt. I went through this on my dad's Camry recently. It would keep slipping even after setting the tension higher, only solution was a new belt.
    • Belt polished and/or pulley(s) glazed. Rub pulleys with sandpaper, replace belt.
    • I've also got a quick jack. I would never get under my car again without using it.  While it might be quicker to use a jack and stands, it is such a quality of life improvement that I wouldn't have it any other way now.  How much slower the quick jack is to setup will be based on your circumstances. Can you leave the jack rails on each side of the garage? Can you leave the hydraulic lines attached? etc.  If you can drive the car into the garage and simply push the jacking rail thingos under the car into place, it is super quick to setup and use. But if you have to pull the pump unit out of storage, attach the hydraulic lines, wheel out the lifting rail thingos.... yeah takes a bit of time. Having said that, I would still prefer that to using a jack and stands lol. 
×
×
  • Create New...