R34 Body Kit Options

[SKY 34]

I was condsidering as well..but I prefer Bomex.

Do luck is nice but you have to keep the vehicle sideskirts and rear with similar square - ish style, otherwise won't look good. At this point there are no do luck side and rear copy.

I had the intention of mix matching do luck front bar with my existing Bomex sides and back, but Bomex are too curvy in comparison to the rectangular do luck front...so changed my mind

[ferks gtt]

where can i source this type of lip ?

http://www.skylinesaustralia.com/forums/up...23025_thumb.jpg

as posted on page 1

[G_Force]

where can i source this type of lip ?

http://www.skylinesaustralia.com/forums/up...23025_thumb.jpg

as posted on page 1

Looks like a Nismo carbon front lip off a GTR, not sure if its a factory option or aftermarket.

[Mikyel]

Ok. So has anyone actually had a DMD Do Luck front bar fitted to their 34? I'd like to kno if u can use the factory bonnet with it or would the longer GTR bonnet be required. Also would u need a huge FMIC to fill that big hole in the centre or would any FMIC do the job? Im running a Hybrid GT kit. It also looks like the FMIC pipes goes thru the front bar meaning a hole would have to be cut to fit so would this be a mod thats to be taken into cosideration.

Thanks to anyone that can help.

i got the do luck kit for my gtt.. it fit straight in, no need to change bonnet and stuff..

with the hole i dont think you need such a huge fmic..

bad thing about it is, its so huge the front bar, i havent even lowered the car and its like 4 finger from the ground..

[STATUS]

awwwww why is everyone getting the Do LUck.....

i see your after front gaurds. i have these gaurds if you get stuck.

[G_Force]

i got the do luck kit for my gtt.. it fit straight in, no need to change bonnet and stuff..

with the hole i dont think you need such a huge fmic..

bad thing about it is, its so huge the front bar, i havent even lowered the car and its like 4 finger from the ground..

Thanks, sent u a pm

[thirty four]

i got the do luck kit for my gtt.. it fit straight in, no need to change bonnet and stuff..

with the hole i dont think you need such a huge fmic..

bad thing about it is, its so huge the front bar, i havent even lowered the car and its like 4 finger from the ground..

any chance you could post up some pics of your car?