Jump to content
SAU Community

Recommended Posts

iv had an r33 gtst for about 6mnts and now am wanting to modify my engine. the only modifications are intercooler and pod filter that i noe of. i hav $10000 to spend and was wondering if anyone had any advice on modifcations to get the most power from my engine. i hav in mind to put in a computer, new fuel pump and injectors. also will be purchasing a new turbokit with a bigger high mount turbo. are these mods wise? Also thinkin bout converting the rb25 to a rb30 block is there ne great advantage to this or is it just alot of hassel for only a minimal advantage? Ne advice would be much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/154697-engine-upgrade/
Share on other sites

if i had 10g large to spend and was happy how my car looked

id go, nice new suspension

brake upgrade

hiflo stock turbo

injector upgrade

powerfc

fuel pump

z32 afm

exhaust, dump pipe, hiflo cat

and get a quality tune

i would make sure to buy as quality parts at the 10g allowed

Link to comment
https://www.sau.com.au/forums/topic/154697-engine-upgrade/#findComment-2877266
Share on other sites

It comes down to what you want to do with the car.

Personally, i want a car with good response at the expense of top end (even though i have fluked a good balance) as my car is predominantly street driven.

With that in mind, I dont think you can go past a garrett 3071IW (or 52 trim 3076 IW if you want more then 270rwkw) on the stock manifold, with dump and lines and intake pipe installed should be under 3k. You're at the limit of your stock internals already.

Id get hks 256/264 cams for about 1200 delivered, add 300 installed.

z32 afm and pfc (if you can find one) 2k installed and tuned.

5 inch metal cat and cheapy exhaust and front pipe from someone like just jap say 1200 installed.

555 nismo injectors, say 1k installed if you get your own off nengun or perfect run and have them installed with the rest of the gear.

The remaining 1k or so on swaybars and upgraded springs and shocks.

There's a lot more suspension and driveline stuff you will need to do later on to get all the power down but your out of cash for now :)

Link to comment
https://www.sau.com.au/forums/topic/154697-engine-upgrade/#findComment-2877319
Share on other sites

if i had 10g large to spend and was happy how my car looked

id go, nice new suspension - 1500

brake upgrade - 1000

hiflo stock turbo -2000

injector upgrade - 750

powerfc - 1000

fuel pump - 300

z32 afm - 350

exhaust, dump pipe, hiflo cat - 1200

and get a quality tune - 500

i would make sure to buy as quality parts at the 10g allowed

I concur once again :)

I've added in some rough prices into the quote above...

It works out to around $8,600 not including labour which will makeup the $1,400 once it all in/fitted etc etc.

However a crucial point, i'd also add a clutch to the list $1,200... so total will probably be closer to 11k give or take

The car will be much faster with the money spent on important areas like suspension/braking.

It will also be much more fun to drive than something with just outright power and absolutely no way to use it.

I see little point in spending just 10k on the motor alone for big turbos/manifolds/3ltr bottom end as its totally out of the price range. Its closer to around 20k by the time you do it all if you want the handling with it.

You could "just" spend the 10k on all the power, make 300rwkw, but the car next to you with 250rwkw will give you an absolute hiding anytime, anywhere.

Being it will have a good lot of parts that make a fast car, not just a banger motor.

Power does not automatically equal a fast car, it an overall package. And for the street, 250rwkw is about as much as you'll need

So loser1, take the advice or not, thats just my personal opinion after being around for a few years :P

Link to comment
https://www.sau.com.au/forums/topic/154697-engine-upgrade/#findComment-2877683
Share on other sites

I agree. Too much talk of 300rwkw and not enough of a decent car thats going to go the distnace and be able to dirve well.

eg decent suspension upgrade will cost you 3k installed. Bilstiens, spings, swaybars, bushes etc plus install.

Clutch as mentioned...for 250 or so there are plently of options. about 1-3 k installed depending on ur option.

5k of those alone which doesn't make power...just allows ur car to use what power u just made.

Link to comment
https://www.sau.com.au/forums/topic/154697-engine-upgrade/#findComment-2877909
Share on other sites

thanx guys for ur input i appreciate it it helps but i already hav sway bars, brand new adjustable coil overs, aftermart 3" straight through exhaust so handling and suspension is not an issue this is about power gain. I will make any adjustments later if neccessary. The turbo has already been rebuilt with a larger compressor wheel. I hav ova 200rwkw im jus lookin for the 300 mark or over. and the clutch will be changes cause its stuffed.

Link to comment
https://www.sau.com.au/forums/topic/154697-engine-upgrade/#findComment-2882032
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So we have most the interior back in, and for the first time with one OEM speaker hooked up. The 31 is running, driving and now tunes!!! Hahaha yet another step for the sub that sat 10m under for two weeks!!! unbelievable really 👌 lots of love work and not giving up on her. Seen so many youngsters part way less, and in way better condition. I’m stubborn, thinking another problem is just a hurdle to overcome, One at a time. IMG_9277.mov
    • That is correct. I'm using a modified ABS ring and a ZF speed sensor on my rear diff for speed input. I'm running a Haltech ecu. 
    • Been busy with the newborn. We originally thought we were going to go for a third, but we're good with two lol. He's starting to actually sleep now so I've had some energy to work on the car. It's been parked away in the garage since late November due to winter.  I went ahead and redid all my head oil drains. I originally had my front and rear head drain going into the same pipe but have since split them up. I also added an Ethanol content sensor to get ready to run E85 this summer. Tossed it on my return line. Sensor sits nicely under my intake manifold.    I also have a lot of parts that came in for my rear end. I'll be swapping over to a 3.3 final drive and doing the GK teck anti squat mod. While the rear subframe is off, I'll also change every bushing. We're planning on buying another house soon with the condition that I get at a minimum a 2 door garage, so I'll wait to have more room for this. Now onto the strange things that recently happened... After changing the lower rad hose (It had been sitting in my cabinet for well over a year and was the last hose I had to replace), I let the car idle in the garage to bleed my coolant. After running for a few minutes, it started missing. Got much worst within a minute or two and then stalled and would not restart. My crank sensor decided to crap itself. No damage, no explanation, just died. I went ahead and replaced it with another ZF sensor but the heavier duty stainless model with a shield. Tossed that in and started right up. Has anyone else seen this? I hate when things fail without cause. Luckily this was a blessing in disguise... This lead me to recheck my timing. It seems I may have had a beer or two the last time I had set my TDC angle as I was off exactly 5 degrees... I miscounted a line haha. I was running 5 degrees less then commanded. It's a little embarrassing but helps explain why my dyno operator seemed to think I should be making more then 478rwkws.        
    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
×
×
  • Create New...