Front Camber Kit - R33

[benl1981]

Are there any cheaper alternatives compared to whiteline. I see they are around $300..

Just need something to reduce the neg camber by about 0.5 deg...

Cheers

[justin911]

the whiteline front camber kit is like $160 if you get it via the whiteline online store..come to think of it.. repco / autobarn have it at that price also.... i dunno why there $300 in the GB?? maybe you get 2 sets or something??

kca348 is wat ur after i think

[benl1981]

Thanks justin.

I'm not sure if I need 1 kit or 2.

Do you only use one in the inner side if your alignment isn't that bad? (i.e. only need 1 pack)

Cheers.

I'm wondering if you just put it on one of the 2 points where it meets the chassis (in where one of the wishbone bushed was). This would change camber and toe at the same time.. so then you just get it aligned and they adjust tie rod aswell to make sure the toe is right??

Any comments appreciated

Anybody got the fitting instructions? Its not on the web..

Edited February 4, 2007 by benl1981

[evil_weevil]

so is that the part number/item you need to get more negative camber over the stock will alow?

[justin911]

ya im pretty sure. its the same part number as in the group buy. lets u run upto -1 in the front.

so is that the part number/item you need to get more negative camber over the stock will alow?

[evil_weevil]

cause at the moment on my last allignment it was like 1.39(not sure if theres meant to be a minus in there!) or something

what does that mean?

he said thats the most negative he could get out of the stock arms/camber

[MANWHORE]

evil, your alignment guy was pulling your middle leg.

There is no camber adjustment stock on the front of skylines.

That number is most likely -. If it's plus, there's something seriously wrong with your car.

The front camber kit will allow you to run more neg camber for the track, as well as it will allow you to dial out neg camber from lowering the car for the street for tyre life

[benl1981]

so does anyone have the instructions or able to tell me how you fit just the one kit?

Thanks

[evil_weevil]

yeah im a bit unfamiliar with my words of suspension!

Ive got the print out at home, I can scan it and post up?

I just need to do more learning on the subject

[evil_weevil]

Ben!

Hows it going!

Try sending Gary - Sydneykid a pm - he might have them handy?

[justin911]

this is a for diff set but might help u

http://www.whiteline.com.au/docs/instructs/Z292_KCA336.pdf

[benl1981]

Hey there Chris! Might do that..but there only $170 through autobarn

justin - I saw that pdf but it looks a slightly different setup.

[dezz]

if its for an R33 then $300 is a complete rip off. I don't know why it was priced anywhere near that in the group buy (maybe because the R32 kit is apparently that much, maybe they just dragged the same price over for the 33)

I don't think I even paid half of that ridiculous price...i've got the full whiteline/bilstein kit now, and I only got the springs/shocks and bump stops/dust covers from the GB...the rest of it I got from repco way cheaper, and thats without any bartering at all...I just gave them part numbers and the first prices they gave me for each item were cheaper

Shop around people...

[benl1981]

hey Dezz. DO you have any pics or can you explain how the camber kit works.

I'm just wondering if you need 1 or 2 kits, and if 1 kit where you actually install the new bushes..

Cheers

[dezz]

I'd have no idea how it works...I just paid a suspension place to install it and set it up...

I got 1 kit, and thats all I needed to get the settings SK reccomends

[benl1981]

Thanks Dezz. If you get a chance sometime can you have a look at where your upper wishbone attaches the the chassis and see which one/or both has the new adjustable bush added to it.

Cheers

[evil_weevil]

So the one front camber kit does both wheels yes?

Man im suck a n00b

[dezz]

yes

example, i bought 1 caster kit, 1 front camber kit, 1 rear camber kit....thats all i needed

I think u can add more camber kits and maybe caster kits, for more adjustment...but im a suspension noob so dont quote me

[evil_weevil]

sweet as

Ben - drop me a PM of when and who you purchase from mate! (please!)

[evil_weevil]

Ben,

How did you go mate? any news>?