Jump to content
SAU Community

Front Camber Kit - R33

benl1981
 Share

Recommended Posts

justin911 Grand Master

justin911

Posted
Posted

the whiteline front camber kit is like $160 if you get it via the whiteline online store..come to think of it.. repco / autobarn have it at that price also.... i dunno why there $300 in the GB?? maybe you get 2 sets or something??

kca348 is wat ur after i think

benl1981 Grand Master

benl1981

Posted
  • Author
Posted (edited)

Thanks justin.

I'm not sure if I need 1 kit or 2.

Do you only use one in the inner side if your alignment isn't that bad? (i.e. only need 1 pack)

Cheers.

I'm wondering if you just put it on one of the 2 points where it meets the chassis (in where one of the wishbone bushed was). This would change camber and toe at the same time.. so then you just get it aligned and they adjust tie rod aswell to make sure the toe is right??

Any comments appreciated

Anybody got the fitting instructions? Its not on the web..

Edited by benl1981
evil_weevil Grand Master

evil_weevil

Posted
Posted

cause at the moment on my last allignment it was like 1.39(not sure if theres meant to be a minus in there!) or something

what does that mean? :laugh:

he said thats the most negative he could get out of the stock arms/camber

MANWHORE Grand Master

MANWHORE

Posted
Posted

evil, your alignment guy was pulling your middle leg.

There is no camber adjustment stock on the front of skylines.

That number is most likely -. If it's plus, there's something seriously wrong with your car.

The front camber kit will allow you to run more neg camber for the track, as well as it will allow you to dial out neg camber from lowering the car for the street for tyre life

dezz Grand Master

dezz

Posted
Posted

if its for an R33 then $300 is a complete rip off. I don't know why it was priced anywhere near that in the group buy (maybe because the R32 kit is apparently that much, maybe they just dragged the same price over for the 33)

I don't think I even paid half of that ridiculous price...i've got the full whiteline/bilstein kit now, and I only got the springs/shocks and bump stops/dust covers from the GB...the rest of it I got from repco way cheaper, and thats without any bartering at all...I just gave them part numbers and the first prices they gave me for each item were cheaper

Shop around people...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      MLR's Bogan cruise ship

      By GTSBoy · Posted

      Por qué no los dos? Body colour red with black stripes down centre, onto bonnet and bootlid.
    • SteveL
      R32 GTR Bonnet Hinge Bolts

      By SteveL · Posted

      From my bolts, standard M8 with 1.25mm thread pitch (M8x1.25mm).    Length is 19mm under the head and has a captive 18mm OD flat washer.   20mm length from a bolt shop is what you'll be able to get.   Make sure they're zinc plated.    If you're concerned about strength, grade 8.8 will be more than enough. Original PN is 01121-04971.  Now discontinued according to Amayama but that's because it's one of the parts that's been captured by the Heritage program, which explains the ridiculous price.   New PN is 01121-RHR20: https://nismodirect.com/nismo-heritage-bolt-pin-hinge-hood-bnr32-nissan-skyline-gt-r-01121-rhr20-01121-04971/ About AUD33 converted from Yen in the above link but that's just one example. Interesting that the hinge-to-body bolts are still available non-heritage.....PN 08116-8161G around $2 each (amayama).    Same thread but 16mm long.
    • GTSBoy
      ER34 RB25DE Auto - Would a flush ever fix an "A/T" light?

      By GTSBoy · Posted

      Well, if that filter was impeding fluid flow, then it could have similar effects to faulty solenoids. The TCU will register a fault when it does something (ie, changes the state of a solenoid) and does not detect the required result. If there are other causes that can make the same lack of result, then they will be indistinguishable to the expected cause for which the TCU has a code.
    • GTSBoy
      R34 RB20DE NEO coilpack?

      By GTSBoy · Posted

      Yellowjackets, red ones, blue ones (other than Splitfire) have all been demonstrated to be unreliable on turbo engines. That unreliability can be anything from outright failure (ie, 4 out of a set of 6 working out of the box) to just not being strong enough for the task, on a boosted engine. Not enough of us care about NA engines to know whether that unreliability is an issue for the undemanding needs of an NA RB20. I should think though that the DIS-008 should fit the 20. There's not really any reason for the head/coil mounting area to be any different on those 2 Neos. I wouldn't be buying Splitfires, or any other old tech coilpack, for a car in this day and age though. I would buy modern pencil coils and do what needs to be done to adapt them to the loom. That's relatively trivial these days, with numerous kits for fitting R35, or Audi, or Yaris/Corolla coils.
    • Ozdavroz
      So i brought a boat...

      By Ozdavroz · Posted

      Keen to see how much work is needed to get an abandoned Skyline going. My R32 has been sitting idle for three years or so but finally got some time to get it going again. (Also lurking SAU and trying to hit 10 posts so I can start my own intro thread with pics)
×
×
  • Create New...