Jump to content
SAU Community

Recommended Posts

heya,

Just finished putting the rb30 together and i'm having a few issues.. the car turns over but hesitates massivly to fire, the only way to get it to run is to give it a bit of throttle, and even then it's sketchy, it's either give it throttle and watch it rev up, or back off and she dies.. feels really like a boost leak issue, except it will actually rev when given throttle, although been over it many times and can't find one nor hear one when it actually does turn over. when it does turn over it is running massivly rich (black smoke), so i was thinking that perhaps one of the cam gears has slipped when i was tightening it up and is now running an extra tooth retarded or something, i guess this will be the next thing i'll check but i'm stumped for idea's.. it's obviously getting both spark and fuel as it turns over.. any advice would be great

thanks alot guys,

mark

:blink:

Link to comment
https://www.sau.com.au/forums/topic/154936-rb30det-idle-issue/
Share on other sites

heya,

Just finished putting the rb30 together and i'm having a few issues.. the car turns over but hesitates massivly to fire, the only way to get it to run is to give it a bit of throttle, and even then it's sketchy, it's either give it throttle and watch it rev up, or back off and she dies.. feels really like a boost leak issue, except it will actually rev when given throttle, although been over it many times and can't find one nor hear one when it actually does turn over. when it does turn over it is running massivly rich (black smoke), so i was thinking that perhaps one of the cam gears has slipped when i was tightening it up and is now running an extra tooth retarded or something, i guess this will be the next thing i'll check but i'm stumped for idea's.. it's obviously getting both spark and fuel as it turns over.. any advice would be great

thanks alot guys,

mark

:blink:

Check that injector o-rings are in properly does it sound like there is a massive air leak??? Also what injectors are you running and what duty cycle did you set them too?

hey again,

really sure there's no boost leak, no hissing, been over it all including intake manifold.. as for specs, running a power fc (swapped back over to stock ecu but no luck) stock injectors, stock afm, stock turbo, fmic.. checked timing and it's all okay.. really starting to stump me :S

try screwing up the idle adjuster screw a little... check AFM & TPS, vacuum leaks, and also if the car sat a bit make sure the fuel isn't stale, maybe throw in some injector cleaner... i had an RB30DET do the same thing. but after it ran for a bit it came good...

hrmz.. fuel is 3 months old at the most, would it go stale this quickly? sort of starting to feel like it might have a misfire once it get's revving.. i just get this feeling that the base timing must be out, but it all seems to check out

trying to brainstorm a few other idea's and i'm thinking that perhaps the AFM is dirty.. fair bit of oily smoke was flowing out through it when the last bottom end let go so i'll give it a whirl tomorrow

perhaps in addition to this, check the DIY section for the repairing gtr AFM's thread, so you can check the dry solder joints within the AFM

afm checks out as okay, swapped it in with another one and still the same problem :laugh: while fooling around wtih the afm's i though't i'd cracked it when the car held idle by itself indefinently hunting around (pretty badly i might add).. also noticed that if i can manage to hold the revs almost steady then the blow off valve is continiously sounding, even though the throttle is open..

well, got overly enthusiastic tonight and pulled the whole intake down from the plenum to the turbo, gave everything a good clean, went over it with a fine tooth comb, then cleaned all of the electrical plugs.. put it all back together and she's running.. still a bit rough but i've yet to properly setup the timing, so a win for the rb30det at last >_< thanks for your help guys, much appreciated

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • this is the reason we have more than one child right?
    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
×
×
  • Create New...