Jump to content
SAU Community

Recommended Posts

heya,

Just finished putting the rb30 together and i'm having a few issues.. the car turns over but hesitates massivly to fire, the only way to get it to run is to give it a bit of throttle, and even then it's sketchy, it's either give it throttle and watch it rev up, or back off and she dies.. feels really like a boost leak issue, except it will actually rev when given throttle, although been over it many times and can't find one nor hear one when it actually does turn over. when it does turn over it is running massivly rich (black smoke), so i was thinking that perhaps one of the cam gears has slipped when i was tightening it up and is now running an extra tooth retarded or something, i guess this will be the next thing i'll check but i'm stumped for idea's.. it's obviously getting both spark and fuel as it turns over.. any advice would be great

thanks alot guys,

mark

:blink:

Link to comment
https://www.sau.com.au/forums/topic/154936-rb30det-idle-issue/
Share on other sites

heya,

Just finished putting the rb30 together and i'm having a few issues.. the car turns over but hesitates massivly to fire, the only way to get it to run is to give it a bit of throttle, and even then it's sketchy, it's either give it throttle and watch it rev up, or back off and she dies.. feels really like a boost leak issue, except it will actually rev when given throttle, although been over it many times and can't find one nor hear one when it actually does turn over. when it does turn over it is running massivly rich (black smoke), so i was thinking that perhaps one of the cam gears has slipped when i was tightening it up and is now running an extra tooth retarded or something, i guess this will be the next thing i'll check but i'm stumped for idea's.. it's obviously getting both spark and fuel as it turns over.. any advice would be great

thanks alot guys,

mark

:blink:

Check that injector o-rings are in properly does it sound like there is a massive air leak??? Also what injectors are you running and what duty cycle did you set them too?

hey again,

really sure there's no boost leak, no hissing, been over it all including intake manifold.. as for specs, running a power fc (swapped back over to stock ecu but no luck) stock injectors, stock afm, stock turbo, fmic.. checked timing and it's all okay.. really starting to stump me :S

try screwing up the idle adjuster screw a little... check AFM & TPS, vacuum leaks, and also if the car sat a bit make sure the fuel isn't stale, maybe throw in some injector cleaner... i had an RB30DET do the same thing. but after it ran for a bit it came good...

hrmz.. fuel is 3 months old at the most, would it go stale this quickly? sort of starting to feel like it might have a misfire once it get's revving.. i just get this feeling that the base timing must be out, but it all seems to check out

trying to brainstorm a few other idea's and i'm thinking that perhaps the AFM is dirty.. fair bit of oily smoke was flowing out through it when the last bottom end let go so i'll give it a whirl tomorrow

perhaps in addition to this, check the DIY section for the repairing gtr AFM's thread, so you can check the dry solder joints within the AFM

afm checks out as okay, swapped it in with another one and still the same problem :laugh: while fooling around wtih the afm's i though't i'd cracked it when the car held idle by itself indefinently hunting around (pretty badly i might add).. also noticed that if i can manage to hold the revs almost steady then the blow off valve is continiously sounding, even though the throttle is open..

well, got overly enthusiastic tonight and pulled the whole intake down from the plenum to the turbo, gave everything a good clean, went over it with a fine tooth comb, then cleaned all of the electrical plugs.. put it all back together and she's running.. still a bit rough but i've yet to properly setup the timing, so a win for the rb30det at last >_< thanks for your help guys, much appreciated

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
    • As above, replace as many as you can afford. If anything, due to old age.
    • Can confirm previous shop that built my motor had no fking clue about oil control and caused my motor to shit itself after two track days. Current shop, Birrong Automotive, has managed to build me a motor, not to mention, has also let me tune it myself and it has yet to blow up after 7 track days. Great oiling success, yashimash.
×
×
  • Create New...