Jump to content
SAU Community

Recommended Posts

standard r33 series two with pod and 3.5in to 4in turbo back exhaust

made 162 kw@w

after power fc install its got 145kw and surges at cruze and sometimes it cuts out all together

compression is good new plugs etc

so my question is why did i spent 2k plus buyin this thing and getting it tuned ??

any idea?

can i retune it myself?

Edited by juls33

i had the power fc tuned by a wksp

change the ecus over and its normal ????

ecu was the only thing he changed

Its not an issue with the PowerFC itself dude.

If you are not familiar with tuning, i would strongly advise against it.

Did you just change ECU, and tune it?

Nothing else at all?

$1000 for just a tune? My gosh i would be pissed! $500 - $600 is the usual price for a full tune... $450 G.B at J.E.M for a full tune if your in Sydney...

The Apexi PFC comes with a base tune that is made to plug in, start and drive.. meaning if your car is worse then before, its either:

- Poor tune

- Dying part (Fuel pump or AFM)

My advise would be to take it to a reputable tuner, get them to put it on the dyno and diagnose the problem before you end up needing a rebuild.

PM me if your from sydney... got a Dyno Day coming up soon... for $50 its the cheapest insurance for your engine...

Cheers

no im in townsville thats why soo expensive

only one tuner i used to trust :-{

ohh and my fuel economy is very poor 205 km to a full tank (50l)

fuel ratios are spot from the dyno printout

Edited by juls33
no im in townsville thats why soo expensive

only one tuner i used to trust :-{

ohh and my fuel economy is very poor 205 km to a full tank (50l)

If you're looking for help in TSV...try posting in QueenslandStreetScene.com and someone may be able to help you. I am a Stagea owner in Townsville but I am not up to the stage of performance tuning and so am not really able to assist you (The Stag is almost completely stock at the moment).

Hope this is of assistance...

...Chris

For that price they should offer after sales support. Take it back. Get them to drive it and point out what you aren't happy with.

As for the peak power, it's only part of the equation, was the 162 on another dyno or the same one? They don't necessarily read equal.

145 is pretty low, but without a decent intercooler it could have been heat soaked to buggery when the last power run was made.

And with that economy you should make sure they have the closed loop control on. Your O2 sensor could be on the way out but i doubt it

Edited by BHDave

its not the engine it has to be the tune i can plug the old ecu in

and it heaps better and no dramas

162 was third gear peak at 115kph standard ecu

145 was 4 gear 150kph pfc

same day same dyno ?

Edited by juls33

nope standard nothin extra

i drove it with the standard map briefly

not long enough to say either way

i can say it didnt have the holes like it does now

it just seems to lose its place or something and

cut ignition , do pfc have a self diag?

If they didn't disable the boost controller in the pfc, or they set the boost way low [like 3psi or something stupid] maybe..................I really don't know, I'm just wondering if this could be a problem, someone with more knowledge than me may be able to answer.

nope standard nothin extra

i drove it with the standard map briefly

not long enough to say either way

i can say it didnt have the holes like it does now

it just seems to lose its place or something and

cut ignition , do pfc have a self diag?

ive just installed my PFC running the base map un-tuned and its given extra power straight up, theres no way you can go backwards, definately take it back to them, you paid good money for the tune, be firm let them know you want it sorted out cause thats horse sh*t, or atleast get them to find out WHY its gone backwards anyways if you want help with the PFC check out this link its tops

http://paulr33.skylinesaustralia.com/docs/...rfc-faq.htm#end

take it back and ask them, a $1000 for a tune is heaps. i would be happy with $500 at the most. read the pfc faq (in my sig)to find out about your fuel economy and tune types. this will give you some info and help sort it out with the tuner. there is no reason you should loose or power. its all in the tune

Sorry if you already answered this (only had a quick skim)

Have you put the factory ECU back in since this problem came about?

And see how it goes then?

If it runs ok with the stock ECU, i'd be going back to the tuner and asking what on earth they didnt do

Especially for $1000 mate, thats an extremely hefty bill for something if its not right.

For $1000 they should have had the car running perfectly before you picked it up

200k per tank jeez!!! it would be pumping heaps of smoke out.. i wouldnt trust the dyno either,, you cant compare a run in 3rd at 115 and a run in 4th at 150km for starters it should be making alot more power than that w/e gear it was in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
    • Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
    • Ah, should have been clearer. Currently has a flex sensor installed all good to go.    like u mentioned, I’ve only ever known the car on e85, I might hate 98, but I have to try it out first. Everyone says the -5 turbos get pretty laggy on 98 octane tho…
×
×
  • Create New...