Jump to content
SAU Community

R33 Rear Stealth Spoiler

grepin
 Share

Recommended Posts

grepin Experienced

grepin

Posted
  • Author
Posted

However they are a little different and maybe not to everyones taste. I wanted one like JMS or UAS however found the price a little high. The quality of these are great with light and drain holes. Also there has including mine only been about 8 ever sold.

Here is a pic sitting on the car. Its maybe more lock the wings on the old brock VK commodores.

grepin Experienced

grepin

Posted
  • Author
Posted

Because you asked!!!

You can see that in between the post to sell and the withdrawl I had heaps of response. Not when everyone took interest. I took a trip to a recommended painter and discovered that it is quite cheap and easy to fit.

Origonally I had one of the JMS/UAS types not from them that fitted like crap. I ordered this one on word that they are a lot better quality. Made to order. Picked it up realizing it was different to what I expected. Initially thought thats no good lets see if I can get any offers, said $270 expecting around $250. Everyone nowdays expects to bargain so you have to put a markup. At full price it is dirt cheap anyway.

Where was I.....anyway I sat it on the car took pics looked at it for a while and it grew on me. Consequently not for sale.

I guess I have really opened up a Hornets nest and maybe should have this Thread removed.

Heres more pics....

grepin Experienced

grepin

Posted
  • Author
Posted

I seem to have started something here.

www.silinsspecialvehicles.com.au

is the website with all contact details.

They make to order. He (Wally) has sent some interstate so he does have that capability I believe.

They dont have any Skyline stuff on the website so when mine is done late next week I will make a new post with pics for all to see.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      PULSAR PSR2860R 0.86A/R or 0.64 GEN 2 Turbocharger Both are -50*67mm 8 blade billet compressor wheel Cheers  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe.....EDIT... nope, the Kraken is a cast jobbie, the REv9 uses welded up stainless, plus $8000 AUD before shipping, installation and tuning) Where else in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit that Pulse fitted, and it was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet
    • The Bogan
      NC MX5

      By The Bogan · Posted

      This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe), where in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit, and was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet  
    • Mitchp77
      UniClutch

      By Mitchp77 · Posted

      Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • Murray_Calavera
      NC MX5

      By Murray_Calavera · Posted

      I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
×
×
  • Create New...