R32 Rear Arms

[neo32]

got r32 gtst

haveing isues with it feeling squirmy in the rear any idears

changed shocks

got hicas lock bar

got new rack ends cause they were stuffed as well

then i changed subframe bushes to noltec ones

then got tein flex coilovers cause the ilets on the bottom of my tunable were f**ked

and it still feels like hard core 4 weel steer coming out of corners and big launches

any idears

i was thinking maybee teh camber arms and traction arms

or maybee bushes in lower controll arms

theres nothing else to replace

also maybee weel bearings

reason for this topic is 1 i want to get it sorted

2 does anyone done rear arms on a 32 and know what fits over the teins

i hade a mate with s15 and same flex coilovers brought whiteline rear arms and they didint fit so any help with this much appricatied

ps sorr for all the spelling and grama errors

thanks guys

[neo32]

also point to note to the guys that can help the car also has rb25 neo in it with r33 turbo box

and a kazz 1.5 way mechanicle diff

[neo32]

any help much appricated

free bump

[Beer Baron]

well I'm not really sure what is causing the play you are getting in the rear suspension. I'm just about to fit some cusco rear upper arms so I think they will fit over Teins or anything like that. I'm also putting in some ikeya formula traction rods. so I guess that answers part of your question. I'm quite sure the cusco arms work fine with japanese coil-over kits.

[BHDave]

I've had the same problem in the past and found that by replacing everything it fixed the problem. If you replace everything your should eliminate the problem aswell About all you have left to do is the bushes anyway.

Project D upper arms cleared both my cuscos and teins. They are modelled on cuscos so i assume a cusco one will fit too. I haven't heard of anyone having problems with fitting any of the jap (or copy)adjustable upper arms.

Anyway, enough banging on. What height do you have your car set at and what are the alignment settings on the rear end (camber and toe). What tyres are on there?

[Duncan]

Looks to me like you haven't done the tie rod ends for the HICAS bar, or maybe the ball joints at the hub end of the tie rods, we had trouble with them....caused toe to move by something like 1cm at times....it was terrible tor drive

[neo32]

Looks to me like you haven't done the tie rod ends for the HICAS bar, or maybe the ball joints at the hub end of the tie rods, we had trouble with them....caused toe to move by something like 1cm at times....it was terrible tor drive

u mean rack ends as i replaceed them these are the things that screw into the hicas rack right

as for tyres yokahama v102

18* 8 235/40/18

um camber about 2.5 deg max adjust

and to to suit tp prevent tyre where

think maybee need to do drives side weel bearing

did passanger about a year ago

[neo32]

ok can anyone help me out with a great deal on rear arms

or bushes

what does people recomend