Jump to content
SAU Community

Day Out With Kutsie, Take 2 (updated With Pics)

WogsRus

By WogsRus,
in Tasmania

 Share

Recommended Posts

WogsRus Veteran

WogsRus

Posted
Posted (edited)

So it was time to get a new tune with kutsie.

Changes since the old setup, was a new cold air intake, a new ecu from Central 20, and a gizzmo EBC.

So I will put the scans up tomorrow.

First up Andrew ran the car with the setup as was, and running rich it pulled a good 180 rwKw or so. But as we began to take fuel out of the car with the SAFC II, pinging set in. So Andrew knocked back the timing and decreased the base fuel pressure, and the pinging went away. He proceeded to do so a few times and set up the boost controller for 4 different settings, and the cruise lambda settings as well.

SO what was the outcome? HERE WE GO, 192 rwKw @ 9.3 psi, 195 @ 10.2psi, 199 @ 11.9 psi AND 207 rwKw @ 12.3 psi. I have actually seen the EBC jump to 14.2 psi while driving and I don’t know what power that was, but in first gear I got nothing but smoke out the tires.

YEEEEEEEEEEEEEEHHHHHHHHHHHHAAAAAAAAAAAAAAAAA 200 rwKw target achieved, thus stage one is complete.

Once again thanks must go out to Andrew and the team at Pro Automotive, I can't state enough how professional the guys there are. Many thanks.

So now onto stage two. New intake plenum in planning progress, new turbo, new injectors and a new ecu, not sure which, but will actually try what it will do with the current Central 20 ecu and a new turbo.

For a relatively stock car, with all the mods being done by myself, I am chuffed. Not only did I reach my target, but I due to the new ECU I picked up close to 60 rwKw through the whole rev range.

EDITED: It would pay if i read the dyno properly.

Edited by WogsRus
Young GT-R Proficient

Young GT-R

Posted
Posted

glad to see you got there eventually :laugh:

that's more power than mine had! bastard!

Well it'll still be a couple months before mine is turboed, but I'd like to see my figures within 15-20rwkw of that from the dirty old RB30

WogsRus Veteran

WogsRus

Posted
  • Author
Posted

hell yeah, befor it was so slow through the mid range, and then bag, gear change. Allthough because it seams like there is less pull, because it is more linear, IT IS SOOOO much faster then before.

grandmasterb Grand Master

grandmasterb

Posted
Posted
  WogsRus said:
Thanks Toff, much appriciated. The car is great, and loving it.

Hay have you got a box soughted yet?

:no: he hasn't and is still looking for one ASAP :laugh:

You should of gone into Joe's on Tuesday they had the release of the 07 R1.

Not a bad bus by the looks of it but i've got my eye on something else :P

FIX THAT BIKE ALREADY WOULD YA :sorcerer:

WogsRus Veteran

WogsRus

Posted
  • Author
Posted

YESSSS OH GREAT ONE< I WILL DO AS YOU DESIRE.............

Mate i was already out the door on Tusday, but my wifes sister was up form Sydney with her husband, and they decided to go for dinner, eaven though they knew i had other plans, hence my day was screwed.

Will you be in next tusday?

Hi Young GT-R, got to work early, like me?

grandmasterb Grand Master

grandmasterb

Posted
Posted
  WogsRus said:
YESSSS OH GREAT ONE< I WILL DO AS YOU DESIRE.............

Mate i was already out the door on Tusday, but my wifes sister was up form Sydney with her husband, and they decided to go for dinner, eaven though they knew i had other plans, hence my day was screwed.

Will you be in next tusday?

Hi Young GT-R, got to work early, like me?

:) im glad your learning...

Bloody inlaws hey who needs em :)

You keen for a beer next Tuesday old kid???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • PranK
      2001 R34DE

      By PranK · Posted

      Bloody apprentices! 🙄
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...