Jump to content
SAU Community

Recommended Posts

hey, i was canaried a few days ago for a few things, such as ride height, unroadworthy tyres, parker bulbs blown, pod filter and loose front bar. now im not bitching in any shape, way or form because i knew i had this coming. all i wanted to know was that the officer said something about EPA. does this mean that i will be sent to EPA to check if my defects have really been cleared (due to dodgy rwc's) or that they will do a FULL inspection of the car in general? such as ALL modifications on the car.

any feed back would be awesome, especially those who have been in the same position.

cheers, Miguel

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/
Share on other sites

EPA aren't there for defects or dodgey rwc etc etc.

They are there to check your noise level output and your exhaust gas emissions.

If you have a cat and all the pollution gear intact, no aftermarket ecu/turbo, no boost controller and only 1 intake mod, you should pass the emissions test.

If you exhuast is under 90dB, you'll pass the noise test

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2888643
Share on other sites

EPA aren't there for defects or dodgey rwc etc etc.

They are there to check your noise level output and your exhaust gas emissions.

If you have a cat and all the pollution gear intact, no aftermarket ecu/turbo, no boost controller and only 1 intake mod, you should pass the emissions test.

If you exhuast is under 90dB, you'll pass the noise test

awesome awesome! as i have a dr. drift remap, hiflow and a spare stock muffler (read 84dB), i should be able to pass if i take out my bleed valve and pod. would they check injector flow? as i have nismo 555cc and dont have the stock ones anymore :D

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2888660
Share on other sites

Depends on what type of EPA he gets

Macleod, or just an exhaust test.

Macleod wont pass ECU mods, injectors, turbos anything.

You might be lucky and get passed, you might be unlucky and be pinned for each modification

Its your own gamble if your off to Macleod

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2888855
Share on other sites

if i am off to macleod, id be prepared to change everything over back to stock, wouldnt be that much of a bitch would it? would my car still be drivable if i swapped my 555cc injectors with the stocker? tune is under 200rwkw so stock injectors are still capable. just need to know if itll work.

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2888867
Share on other sites

Its highly likely they will also check the ECU

So you'd need to return it back to the factory item (un-chipped)

They opened my ECU cover up 18months ago, so the EPA are well aware of the fact you can "chip" stock ECU's

cheers

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2888883
Share on other sites

Yeah, sometimes they are... sometimes they are not.

I had a rough exam, where others have passed with as many things as i was failed for.

As with everything related to law application... its sometimes accurate and sometimes just amazing the things that are not even looked at

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2888906
Share on other sites

When i was sent to mcleod, i was in my old car: Onevia RB20DET, hks2540R, 440cc injectors, full exhaust, dr drift remap etc...

I passed, they checked for BOV, Boost Controller, they did check for aftermarket ecu but they only pulled the plastic cover of they did not pull the computer to bits to check for chip etc...

They did check for aftermarket turbo, but as mine was still lowmounted and had all stock heatsheild on it they passed me...

And they also check for engineers cert if you have engine swap etc...

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2888928
Share on other sites

Guys,

I just got done by police for an EPA noise test. The officer pulled me over, went thru the usual licence check, breath test etc, then said for me to be on my way and he will send me an EPA notice. Whould I have got something off him at the time? Or does it just come in the mail?

Also, from a search on here I have found its measured at 60% of your redline, and that the limit is 90Db. (I have a 1990 R32 GTR). I have a 3inch full turbo back exhaust. No other mods other than like pod filters etc etc. What distance is the 90Db measured at?

Will a swap to a stock exhaust solve my problem?

Cheers for help guys!

Anyone with a stock 32 GTR exhaust, let me know! I need to borrow!! :mellow:

Dan :)

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2897968
Share on other sites

Ok... as for him sending you something.

Its just as he said, it will be sent. Being it wasnt gien to you on the spot, that really only leaves mail as an option, so yes... as the officer said. I will be posted.

RB26 RPM test is 5200RPM.

If you have aftermarket front pipes, a stock GTR doesnt even pass. SO you will need to chat to an exhaust place about "measures" to lower it.

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2898059
Share on other sites

iv got aftermarket front pipes,no cat and 3.5" exhaust, and had to do a noise test,

the exhaust place i took it to said theres no point in testing cause it was a lot lounder then 90db,

so they just cut of my rear muffler and welder flanges on to it a fittied a 2" muffler and i think that got 86db.

Link to comment
https://www.sau.com.au/forums/topic/155325-question-on-epa/#findComment-2898353
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi everyone, I'm generally new to DIY projects, and I've browsed this forum and watched a lot of youtube videos but still have a few questions   Firstly, how does spray painting interior hold up? in particular like vinyl parts, my current mode of thinking is to use methyl spirits to take off original paint, clean/prep well, light coats, no primer or clear coat    Secondly, what is recommended for the headliner and, for example (my car is a r34), the A-pillars which are some kind of other fabric material, do you think I would be successful at retrimming these? or would it be better to go down the blacking out via Dupli-Color Vinyl & Fabric Paint    Any other advice / tips / tricks for refreshing/modernising these interiors?    Thanks
    • As title says  Pm a photo with what u have  Type m style would be good As Hidding a thick front mount
    • Just note that when trying to find a short in a globe power supply, it is best to disconnect the globe as it will allow current through to earth. With it unplugged it is easier not to get confused. Also with the r32 wiring, the high beam has 2 power supplies (one when you push the switch forward and the other when you temporarily pull it back; so if it is the high beam blowing you will need to trace both circuits
    • $75 Location: Gold Coast  Can post via Australia post
    • That's a short. Find the short. It will be somewhere between that fuse and the headlight. Start by removing the plugs from the back of the headlight and dimmer switches, and measure resistance to earth. Supply side (power from the fuse) should have none. The other side should have resistance compatible with whatever globe(s) is there (which is relatively easy to say for a normal globe, perhaps not as easy to say for LEDs). Anyway, if you have very low resistance, you defo have a short. Then you just have to run the wiring like you're running the bowel of a dog (on the operating table) that has swallowed something it wasn't supposed to.
×
×
  • Create New...