Jump to content
SAU Community

Recommended Posts

Hey,

Was overtaking a car in 2nd gear, roughly 4000-5000rpm, decided to go into 4th gear and skip 3rd after overtake.

Clutch in, out of 2nd easily, neutral and press down into 4th, slow gear change.

As i pulled down to 4th, heard a massive grind and it didnt want to go into 4th. As soon as i heard the loud noise, put it back into neutral and rolled a bit and then into 3rd no worries.

Could smell something too after the loud grind, probably the clutch being pressed in for too long?

Are my Syncro's GG'd? or did the clutch play in this too...

Anyone know why it didnt want to go into 4th + loud grind :)

Gearbox is fine now and all gear's work.

Occasionally i have trouble down shifting into 2nd, as in it doesnt want to go in :)

Cheers

Link to comment
https://www.sau.com.au/forums/topic/155509-loud-grind-and-refused-to-go-in/
Share on other sites

you have an aftermarket clutch or just stock ?

my brass button is fcuking my synchros, it grinds into 4th and 5th, only at HIGH RPM mind you so its not a huge issue as long as i take it easy

clutch was all the way in and no chance it was reverse. This is what confuses me..anyone have any more ideas?

Other things which may/may not relate;

- Occasionally have trouble putting reverse gear in.

- One time, my clutch pedal stayed half way in and had to press it a few times until it popped out to full length.

- 2nd gear cant be used in mornings until car warms up

- stock clutch also

cheers

clutch was all the way in and no chance it was reverse. This is what confuses me..anyone have any more ideas?

Other things which may/may not relate;

- Occasionally have trouble putting reverse gear in.

- One time, my clutch pedal stayed half way in and had to press it a few times until it popped out to full length.

- 2nd gear cant be used in mornings until car warms up

- stock clutch also

cheers

i'd be looking at the hydraulics for the clutch

clutch pedal only going halfway in = get clutch serviced by mechanic. like race bred said maybe your hydraulics are shot.

as far as the grinding into 4th goes, most RB boxes have this problem. mine's a minter and even with new synthetic oil in it still grinds into 5th at high revs (4th is OK since the oil change though).

if RB synchros on 4th and 5th aren't brilliant then skipping a gear will only make life harder for them.

does it do it every single time, or sumtimes yes sumtimes no ???

maybe u gotta bleed the clutch, air cud be in your lines. U checkd the reserve,, mite be low.

if reserve ok, next time try givin it a lil rev b4 u slot in gear, if it feels it goes in better ur sync mite be goin bad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...