Jump to content
SAU Community

Recommended Posts

Hey all, Its 8am on a Saturday morning and I've been at work for half an hour already :\ Last few months I've begun to hate working at this place, as they have screwed me over on the roster, restructured my department, and basically changed everything for the worst. Also I have to drive to the city every shift and pay for parking, which is far from fun :( Not to mention the work itself is terrible.

I'm working in a call-centre in the city, and anyone who has done call-centre work can tell you how bad it is. I have done it for almost 3 years now and it's driven me mad! I want to get out of here ASAP!

I'm going back to uni full-time this year and I am looking for a different job to get me through the year, something where I can work weeknights and weekends. I decided that something I would really love to do is work in a Bottleshop, as the opening hours would suit me and I think it would be fun work.

I've been applying at all of the bottlos in my area (south of town) but I haven't even had any nibbles from anywhere.

Does anyone have any or know of any positions available at Bottlos or servos? I would also like working retail at Marion; Thursday nights, Fridays and weekends until I find bottlo work I can do more often.

I will consider most everything and I would work hard! I'm a smart guy and I'm a fast learner. I can provide a resume with lots and lots of customer service experience.

Any help would be more than appreciated guys!

Link to comment
https://www.sau.com.au/forums/topic/155674-looking-for-new-work/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...