Jump to content
SAU Community

Recommended Posts

Ok for those who haven't spotted the latest GTR pic circulating the web, link below:

http://racingsouthwest.com/forums/index.php?showtopic=39598

Source states this was a TT V6 being tested in the USA. Damn it looks hot too.

Enjoy :D

Link to comment
https://www.sau.com.au/forums/topic/155892-new-gtr-spotted-in-michigan/
Share on other sites

on a serious note, if I start arguing wife my wife tomorrow, by the time this thing is released, she should have divorced my ar$e, settled the paperwork, and the property should be sold.

Therefore - move back in with the folks, and buy new GTR :-)

Keep an eye on the below link, can't wait for the pics

The GTR spotted at Laguna Seca raceway, handing a 911 turbo it's arse!

"My buddy works for Skip Barber and they were all blown away with this thing on the track! He couldn't believe how quick it was going around the track! It looked fast to me, but they see exotics out there all the time and they have a lot of respect for the Porsche....But he said "It was spanking the Porsche TT!!!"

http://g35driver.com/forums/showthread.php?t=140228

Edited by NISMO

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...