Which In Tank Fuel Pump Should I Use?

[DriftDadr32]

I own a r32 gtst and my fuel pump is on it's last legs. I want to put in a larger pump but don't know what sort. I want to put in an internal pump as i need my boot. Have seen Walbro bosch and denso pumps.

I'm looking to support roughly 220 rwkw after some future mods. any help would be great.

[BH_SLO32]

I own a r32 gtst and my fuel pump is on it's last legs. I want to put in a larger pump but don't know what sort. I want to put in an internal pump as i need my boot. Have seen Walbro bosch and denso pumps.

I'm looking to support roughly 220 rwkw after some future mods. any help would be great.

My last R32 I installed a bosch 044 but it required a few mods to fit and although it flows well it is noisy and doesn't hold system pressure when the engine is switched off. This means it takes longer to prime next time you go to start the car.

My current R32 has a walbro pump and I love it. Much cheaper and fits in factory position with minimal mods. It also holds the system pressure better than stock. My car has an RB25 with GT35R on the side making 220rwkw with no problems. I have some photos of the install.

Hope this helps

[skylinecouple]

No doubt in my mind that the Nismo pump is the best.It is quiet and comes ready to bolt in.Wires already there on frame and pump mounted.

[MANWHORE]

jeezus christ. there was just a thread about this like last week. look back a couple pages.

i think the thread was by ben1981

i posted quite a bit about it in that thread. gtr pump.

Edited February 12, 2007 by MANWHORE

[DriftDadr32]

My last R32 I installed a bosch 044 but it required a few mods to fit and although it flows well it is noisy and doesn't hold system pressure when the engine is switched off. This means it takes longer to prime next time you go to start the car.

My current R32 has a walbro pump and I love it. Much cheaper and fits in factory position with minimal mods. It also holds the system pressure better than stock. My car has an RB25 with GT35R on the side making 220rwkw with no problems. I have some photos of the install.

Hope this helps

cool, can you remember the part number ?

[BH_SLO32]

cool, can you remember the part number ?

Sorry, I went through all my receipts but couldn't find it. I bought it from Import Bitz (they advertise in zoom). It is a 255l/h walbro which I was led to believe came as a package to suit an R32 skyline although I am not so sure anymore. You can buy them now for about $145 + postage. Have a talk with Kudo Motorsport (one of the traders on SAU) as they sell them.

Cheers

[WazR32GTSt]

i had a walbro pump installed by the team at mercury motorsports www.mercurymotorsports.com.au

[siddr20]

I installed a walbro pump in mine.. rated at 500hp.. was 150 bucks!! from kudos motorsport.. (sponser here)

Comments-- No dramas at all.. and for 150 bucks i aint complaining.. lol