Jump to content
SAU Community

Recommended Posts

I bigger exhaust system can always pass a noise test, and probably an EPA inspection to, providing its below 90dB at the required RPM, and doesn't go over the level of emissions from the rear of the system.

Hi um i dunno if this helps but i had 3 1/2" catback then i gat the epa notice, so i had a good look at what i had under the car and found a Flange plate just under the the rear axel that had the cannon attatched, so i went to an exhaust place and got them to make the back bit out of 2 1/2" with a nice big quite muffler. It cost me 140 but at least they done what i wanted other places wanted me to replace the lot for 350!. Anyway the test showed a nice quiet 80 db.

I noticed that i had no power, no noise and no fun. so as soon as i passed the test i chucked the cannon back on all better now, and when i get another notice probably next week i already have the solution!

>_<

Thanks for the feedback, because i failed the noise test, im getting a standard exhaust fitted for the next test. I really doubt its 98db, but oh well, the exhaust shop says it is, have to believe him i guess.

Thought i'd mention that my mate got his EPA done and they checked mods under bonnet (checked for pod, (has fmic) and boost controller. Also looked at the exhaust and asked if my mate put it on prior to the test (it's this tiny gay thing i had re-installed that i bought for an exhaust noise test) my mate said nah this was on it when i bought it, last owner was 1 who got the epa. Then did the emissions test (we didnt have time to find a stock ecu so we didn't bother) and that passed luckily >_<

Dunno what he's going to say next time though :(

Your mate nearly caused himself a big drama by telling lies.

Its illegal to sell a car with an EPA on it.

If the officer goes and reports, you'll find you might get another visit, or a please explain

Nahh it hadn't been issued whilst i was the owner, EPA arrived in the mail at his house about a week ago, and it went straight to him but he was saying that it was meant for the car whilst the previous owner was driving it, if that makes sense. Was weird though at the actual EPA joint the guy had my name down so they confused themselves somewheres

I was told that if the car gets inspected again, once it has passed the noise test and have been found for excessive noise and has a different exhaust it needs to go for a full ADR compliance which costs 500 bucks. Anyone has had experience in this?

Unless the officer is writing down exactly what the exhaust was, diameter for diameter.

Then the EPA dont know, how can they? :blush:

As long as you rockup to the test, with the same exhaust as what was noted on the test prior. Then its instant pass either way.

Unless the officer is writing down exactly what the exhaust was, diameter for diameter.

Then the EPA dont know, how can they? :(

As long as you rockup to the test, with the same exhaust as what was noted on the test prior. Then its instant pass either way.

I forgot to mention its not the officer that told me that, its actually one of the approved noise testers, as I only went for the noise test instead of the full emission test. But yea i guess you are right, I doubt they know the exhaust layout's design, ie , a straight flow as opposed to a standard one with another box before the rear muffler. Thanks for the help

Cheers

I heard that if your car is manufactured after a certain year you can have a POD without a box, which year is this? Does anyone know?

Please READ this thread. It is already answered quite clearly

Just say you have both a FMIC and PODs and you also have a full engineer certificate what will happen?

will the engineer certifcate allso clear everything including bigger turbos, exhausts, BOV, perfomance mods etc.etc.??

Edited by Shadow01

speaking to a worker from the local exhaust joint tells me under the new VIC LAWS

1st epa free

getting caught and going back to the epa a 2nd time $500bux penalty, because people just keep removing mods=to keep the epa happy then when they get home just put all their mods back on, BOV, pod, loud exhaust whatever is'nt EPA friendly...

speaking to a worker from the local exhaust joint tells me under the new VIC LAWS

1st epa free

getting caught and going back to the epa a 2nd time $500bux penalty, because people just keep removing mods=to keep the epa happy then when they get home just put all their mods back on, BOV, pod, loud exhaust whatever is'nt EPA friendly...

What you were told is in essence correct, however. It all comes down do what is documented by police/epa, and as a direct result of this, what they can prove.

Some people have been asking why police take photos of your car when you are defected, it is so they can keep track of your mods. For example if you are continually defected for 2 intake mods, boost controller and/or ecu but every time you get tested by EPA your car passes they will wonder why you keep getting sent back. If the police can prove that you have these mods usually, but are simply removing them in time for EPA test then you can find yourself in trouble.

I have always found that with EPA it's a case of; 'I'ts not illegal until you get caught'. Many cars pass Mcleod with things they shouldn't, (I have personally passed with atmo BOV, aftermarket ECU and variable boost all at once!) you just need to work out what they look for and what they dont.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • have no doubt and wanted too trust me and may regret later not necessarily worried about weight (would be 8 kg ish total) it was more the $$ to do it properly is about $6 - $7K in hardwear need long 310mm stroke jacks etc - plus install and call me whatever im not doing it myself even if wanted too cant weld etc  - thats $10K installed vs fraction of that cost while Ive spent some money on this POS I actually really dont like doing so unless its got a large chance to make me go faster 😁 hey in still carting this things around on a 15 yr old rusted open trailer so I can spend on racing not buy a new trailer to look better the manual jacks Ive had done are heavy and take space but are transportable and usable anywhere - taking or organizing even compressed air let alone nitrogen which is more whats needed coming from Perth to Winton or Sydney or the like honestly just adds to my brain headaches/ hurts of organisation also ha 15 mins job will get down to 2 - 5 min job vs 1 min job for airjacks - all tradeoffs I spose
    • Purely out of curiosity, how do you know all this @dbm7? Do you work with automatic gearboxes professionally? This goes way way way beyond "I've had an automatic Skyline once and did some mucking around"
    • I'll just reiterate that it's best to do all the wiring diagnostics, before even thinking about buying replacement solenoids ~ that is, be absolutely sure the solenoid is bad.....ie; bad connector(s), rodents chewed through a wire, etc etc. If you don't so this, you can fork out all the money for solenoids, only to find something else is wrong (this'll make you cry if you pull the valvebody only to find a broken wire is at fault... ...some more glue on the solenoid packs -- this is the RE5R01A shift solenoid assembly.... ...these are all shift solenoids ~ ostensibly they're the same as the shift solenoids from the 4-speed auto.... ...this is the RE4R01A solenoid set... ...with these, you have 3 shift solenoids attached to the plate, and the separate solenoid is the EPC solenoid (line pressure control) -- with both designs, the TC lockup clutch solenoid (also PWM so they could slide the clutch shut), is located on the lower valvebody half.... ...(story time)...back in the 90's, it was a common fault that the EPC solenoid (or TC-lock solenoid) would fail, but Nissan only sold them as part of the assembly (think ~$350 at the time) ~ thing was, Isuzu also used these boxes in light commercials, and you could buy the PWM solenoid as a separate part, so it was possible to buy/use that solenoid (around $65), and make it fit (remove the circlip, fit to old plate and deal with wiring)...making it a more cost effective repair. I've not seen the RE5R01A shift solenoid assembly, but with the 4-speed RE4R01A it was possible to hack/fit a single shift solenoid onto an other working set, using a donor solenoid from another set with failed EPC....(by rights the whole set should be replaced), but it ends up being a question of how much life is left in the box itself ; sometimes it's a viable repair to fix one solenoid, just to get another 100k of road miles out of it before it needs first overhaul...other times the box is that old/worn, you're as well doing first overhaul and replacing the solenoids and starting fresh... What Nissan did here with the 5-speed, was relocate the EPC solenoid to the lower valvebody (next to the TC lockup solenoid), and stuck the direct-drive clutch solenoid (for the extra gear) where the EPC solenoid used to be on the 4-speed....I can only imagine they did this for serviceability ; the PWM solenoids are most likely to fail, and it's a doddle to drop the pan and change these out (as opposed to dropping the valvebody itself to get at a top mounted EPC)... ...also keep in mind, that some BMW 3/5 series & Mazda (and maybe some Ford/Mazda rebadges, not sure), also used the RE5R01A box under a different name/part number...not saying parts availability is any better, but sometimes it helps to know this when it comes to NOS floating about in the EU.... HTH  
    • FWIW, air jacks are actually pretty light and simple to add, they are just 4 hydraulic cylinders (often at the main cage A and C pillar points) and an externally accessible airline  - they make quick work a breeze
    • Maximum Attack has entered the chat
×
×
  • Create New...