Jump to content
SAU Community

Recommended Posts

HAHAHA ok so my mate got done for his car being to loud,

so we went and got heaps of Fly Wire and down the road from the place we pulled over and

you just scrunch it up and shove it in the exust pipe!

dont drive a long distance with them as they burn out,

when it was finished being tested ( IT WORKED!! )

we just gave it heaps down the freeway and the flywire shot out the back!

it was really funny, people wore driving past us,

and i was shoving flywire up an exust!

haha

it did work though!

Ho hum.

So... Registering things in the land of VIC.

The car was previously registered by its prior owner in VIC, however whilst it "passed" a roadworthy cert in VIC (i got one done by the previous owner), when i brought it to ACT i had a bunch of problems - since rectified.

However rules aren't the same place to place.

When I hit ACT i ended up getting it engineered with the following to get it passed (as well as having it retinted).

Non-standard Rims/Tyres, 18x8.5, 18x9.5 rears

Non-standard Fuel Delivery System (Fuel Pump etc)

Non-Standard Exhaust

Electronic Boost controller

FMIC

Non-standard Coilovers

Body Kit

Strut Brace

Non-standard steering wheel

Now the only thing to add to this is, it has a Pod (and powerfc). Although its mounted and has a seperator (not a box) between the pod and the engine bay.

The car passes exhaust in ACT and I'm not overly worried about that here, but the pod/FMIC combo seems to worry me from the others experiences here.

Basically - what should i do to the car before taking it over the pits?

The pod will need to go, you can't have 2 intake mods here in Vic. Also, just FYI, alot of police don't care about an engineering certificate. I know you have already had it done, just don't bother with another one. I know people who have still been defected and sent to EPA, so IMO it is a waste of time and money for a daily 'stock-ish' car.

Things like EBC and PowerFC are outright illegal (you may not get caught, just know they are illegal tho)

Hope this helps a bit!

Cheers,

Dan :rolleyes:

I read the whole thread and it didn't look like this was covered. My car has a rwc as of a few days a go and everything is completely stock minus a rear strut bar. I have to take it to vic roads to get registered next week. Now under their policy, import vehicles must be inspected by them before they allow the registration to pass.

Anyone know how thorough this "inspection" is?

Assuming the rwc was infact done properly, i should be fine right?

Got back from a reputable tyre shop and said that wheel spacers are legal if they are bolt on.

I was wondering where i could get a confirmation of this law from vicroads? is there a phone number i can call and ask about modifications like these?

I got defected for wrong tyre load rating on my tyres.

I have two options;

- Replace the tyres on my rims (which require bolt on spacers)

- Or put on a set of rims with tyres which do not require spacers.

Thanks

Patrick

I'm THINKING about running a straight through pipe, what I want to know is how bad is the fine REALLY is for not running a cat? Everyones heard the rumors, but has anyone actually ever heard of getting done?? I'd say there would be a fair few people running straight through pipes around....

Also what is the process? I have more of an understanding that this would be an EPA matter, therefore if a cop pulls you over and happens to look under the car and notice the absence of a cat, surely he isn't going to be able to slap you with a $*insert horrendous figure here* fine on the spot, I would think that he would take photo's and send you to the EPA... by which time you have fitted a workign cat and fixed up all the other goodies.

But what about if you happened to drive through a defect station. Are these run in conjunction with the EPA? Are there people there with noise/emissions testers? Or is it bunch of TMU lads going to town with the illegal mods and the like?

I've tried googling around the EPA website but I can't really find anything of use..

If anyone could shed some light on the matter it would be appreciated. :thumbsup:

tun a straight through exhaust, but keep the cat cover and fill it up with some sort of steel wool to make it seem "full" so if they tap it it wont sound hollow!. Not like they are going to start taking things off your car on the spot!

decat + straight pipe inside will look and sound like(if tapped) a normal cat.. but a cop with half a brain will be able to tell you dont have a cat cause it fkn stinks + the obvious flames if your that unlucky.. but id think he would only epa you cause he cant prove it on the spot i guess?.. your cat could genuinely be fkd and need to be replaced(not including the straightpipe jobby)(insert ash's comment here) i got done by an epa dude setup next to a booze bus.. checked my exhaust with his sniffer thing etc.. i said it was like that when i got the car and got sent to epa no fines etc just did the obvious before i rocked up

Hey guys, just wondering if this car would get EPA'ed. (Not for being too loud but for the aftermarket intercooler with an exhaust?).

"turbo back stainless exhaust system, front mount intercooler, turbo timer, blitz cold air intake"

I've read the documents but not really sure what else get catagorised as another 'air intake'.

I assume "blitz cold air intake" makes in an EPA issue coupled with the aftermarket intercooler?

G'day guys and gals,

Have anyone used BMC carbon airbox along with aftermarket FMIC?

Would i get away with 1 intake mod rule or not?

I'd like to know this before i decide whether to buy it or not.

Cheers

Grant

yep, they're both intake mods so technically you SHOULDN'T get away with it, but that depends on the officer and how he/she feels/knows ect ect...

Ok, thanks for answering my question quickly.

Cheers

Grant

recently got done for a oil breather. i was wondering have any of you guys heard of it?

it seems i keep gettn done for weird things. last time i got defected was because my cooler had to be crash tested for safety (wat a joke)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...