Jump to content
SAU Community

Recommended Posts

Well I received my EPA in the mail, doesn't mention anything about the modifications he found but other than the exhaust it has all been put back to stock, gonna go down to an exhaust shop tomorrow to see what they can do but its 3" turbo back and 3.5" after the cat so it's pretty loud and I'm thinking stock catback with POSSIBLY the metal plate as R31Nismoid mentioned above added in is the only way it'll pass, any suggestions?

Cheers.

Yeah just spoke to an exhaust guy and he said it'll pass with stock cat back which is good, now I need to find someone who will lend it to me for a week in exchange for a slab or something..

Do they care that my N/A airbox doesn't fit properly with stock turbo piping and is only bolted down with one bolt? surely they wouldnt..

Is it full emissions test or noise only ? I got stock cat back but a guys borrowing for an EPA At the moment should have it back by this time next week welcome to borrow if you don't find one sooner

Well I'm not really sure thats the thing, the TMU officer pointed out manual boost controller, pod+intercooler and loud exhaust, now gone back to stock with the controller cos it was useless anyway, airbox is on (N/A one doesnt even fit :/ ) and the exhaust I suppose has to be under 90dB. It doesn't specifically state any modifications on the form but it says "Emission Control Systems And Noise" as the title :( $80.70 to get it tested it says.

Well I'm not really sure thats the thing, the TMU officer pointed out manual boost controller, pod+intercooler and loud exhaust, now gone back to stock with the controller cos it was useless anyway, airbox is on (N/A one doesnt even fit :/ ) and the exhaust I suppose has to be under 90dB. It doesn't specifically state any modifications on the form but it says "Emission Control Systems And Noise" as the title :( $80.70 to get it tested it says.

Yea that's a full EPA. Car must be completely stock or legal (1 intake mod)

So I can leave the intercooler on? Cos theres a hole cut for that nor do I have the original cooler.

Leave the cooler on and have your stock airbox on. If your car isn't heavily moded you'll be fine

I know :( Previous owner has it for 6 years with the mods doesn't even get pulled over, I get stuck in a booze bus 2 weeks after purchase and I get done for his mods :( At least theres no massive mods, exhaust is all I have to worry about now.

Leave the cooler on and have your stock airbox on. If your car isn't heavily moded you'll be fine

Is there a difference between an N/A and GTS-T airbox or have I just set it up all wrong cos it hardly fits :P

I've had 1 full EPA with current mods and think there may be another one on it's way. But for me I have to change: turbo, injectors, afm, exhaust, boost controller and ECU. So yours will be fine

I know :( Previous owner has it for 6 years with the mods doesn't even get pulled over, I get stuck in a booze bus 2 weeks after purchase and I get done for his mods :( At least theres no massive mods, exhaust is all I have to worry about now.

Is there a difference between an N/A and GTS-T airbox or have I just set it up all wrong cos it hardly fits :P

Na and turbo are different boxes mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also, a tip for young players  Check the dates on new tyres before they fit them, I always ask this question at the tyre shop, as they have tried to put "new" tyres on one of my cars a few years ago, but the build date was about 3 years old
    • Yeah - 4 or 5 years is the limit for decent tyres. Pedestrian grade tyres with 400 TW ratings start out hard and don't start to suffer until they are somewhat older again. But the stickier decent stuff? Nup. My current ADO9s are < 2 yrs old, 17000km in, only have about the minimum 2mm of tread depth left, and they are.....not what they used to be. They are clearly much harder now than when new. Whether that is heat cycles (unlikely, for a road tyre), different compound between top and bottom of tread, or actually aging out (in less than 2 years!!!) is not really able to be discerned. But I'd credit actual aging as being at least part of the cause. I've got an old pair of ~50% worn AD08Rs in the shed that I really need to get rid of. They started feeling waaaay too hard to put back on the car after a couple of years sitting there.
    • Personally I wouldn't put tyres over 4 or 5 years old on any of my own cars. Once they go hard the grip characteristics completely change. As per most things it only matters in an accident and that's when you most want them to do their job!
    • I'm replacing the front tyres on the E39 tomorrow because one of them has a few gouges out of it. There is so much tread still on them but they're also 9 years old and the rubber is super hard.  This falls within the guidelines of 10 years old that I've read which surprises me given their condition.  I'm curious about whether you guys care about tyre age or just judge the tyre based on condition? How old would you consider too old?
    • What starts as a scratch, becomes a flesh wound, then quadruple amputation. Jus' sayin'. Crush resistant gloves (The ones with the rubber strips down the back of the hand and fingers) might not be a bad idea after all!
×
×
  • Create New...