Jump to content
SAU Community

Recommended Posts

As far as engine swaps are concerned from a non P plater standpoint they are allowed without an engineers certificate so long as it is another engine sold as an option for that chassis.

Yeah, I've known plenty of people that have swapped in an SR20DE into a 180SX without trouble.

But the 180SX came factory with an SR20DE, the 200SX didn't (on Australian soil at least).

"No engine swaps for P-platers, period" isn't true at all. :rolleyes:

  • 2 weeks later...

Bad news, seems a cop reported me while I was driving home from work and I got a letter in the mail today from EPA saying I need to go in for a noise test. Just a couple of questions..

- Where can I buy or borrow a stock exhaust in melbourne to pass the test?

- Do I need to worry about removing my Apexi FC and EBC as well?

  On 28/12/2012 at 1:04 AM, R33-RB26DETT said:

so they won't even pop the bonnet? I can go in with the aftermarket ecu and ebc and they won't bother to check?

No mate they don't care about anything else, just noise. It's normally at one of the exhaust shops on the list they provide.

Hi guys, really need some advice please. I tried searching but wasn't particularly enlightening.

My 2001 S2 R34 GTR just got defected for the first time (major), with mods done by the previous owner:

- Headlamps: to be returned back to standard.

I am pretty sure they are the standard Xenon HID Phillips D2R bulbs, but the cop didn't agree with me, saying HIDs didn't exist in 2001 so couldn't be stock??? Are the standard HIDs defectable? What's the quickest way to get my globes back to "standard" or "compliant" to pass RWC?

- One intake mod allowed: intercooler/ air filter non standard.

I have apexi pod filters, and what I thought was the standard FMIC in the standard position. Please see photo. It has no aftermarket logos on it, etc. The cop said it was aftermarket, or had been relocated more forward, which was odd, as I have no idea why they would do that. In any case, I might have to change the pod filters back to the standard airbox and just leave the intercooler be. Does that mean I have to retune powerfc? Will I notice much difference in driving?

Can anyone recommend a quick and cheap place for RWC in city or Western suburbs? One place I called wanted $200 for the RWC inspection only!!!

Thanks heap!

3ohT9.jpgeIMe5.jpg

I believe the gtr hids aren't legal cos not autolevelling or fitted with washer something like that iirc but I'd try taken it in and see what tester says

$200 for inspection only is about the going rate as the mechanics have to do more work now they say good luck! Could try talking to Dom at holford motors he might have some solutions as he does compliance work etc or used too

Edited by alr33x

Ok found some info from Adz from a post 2 years ago (not sure why I can't quote it) on HIDs:

"This has been done to death but for the record...

R34's are required by law and SEVS compliance to have the HID globe and ballast removed from the car during compliance. They are to be fitted with standard Halogen globes.

Modern cards with HID's like my Audi have a number of added features that the R34's do not including auto levelling lights and washers. This avoid the dazzle effect over peaks and during rain. I'm not saying this helps, it's just a bullshit ADR and must be complied with.

Personally I used to drive an R34 which was imported personally during the switch from RAWS compliance to SEVS. Seeing the car sat in my garage uncomplied while Crossover gained certification I had the chance to pull the Xenon headlight assemblies out and put in R34 4 door Halogen assemblies. I put them back in after compliance seeing the ballast for the HID's plugs into the same loom as the Halogens (from memory). So there are cars around like mine that still have them and probably lots of cars from the early RAWS days.

I also got pulled over in Knox for my lights and other things. Pettet told me I was pulled over because my "lights looked too blue" even with stock globes. I never pulled them out and I also went to McCloud for EPA and Vicroads. Both places did not even look at them, know or care.

Lights are not an EPA concern, they are however a roadworthy item. I got a road worthy no problems with my lights in.

So, at the end of the day they are 100% illegal under Australian law and SEVS compliance, whether anyone but the cops care is anyone's guess but in my experience. No."

So what is the best way to change the xenon hid globes to halogen ones? Apparently you can't just replace them right?

How did you get a major? I thought major was more then 3 things wrong?

BTW wtf were you doing driving through knox in a gtr lol, you could'nt pay me to drive through there in any import.

Edited by eightsixboy
  On 05/01/2013 at 12:20 AM, eightsixboy said:

How did you get a major? I thought major was more then 3 things wrong?

BTW wtf were you doing driving through knox in a gtr lol, you could'nt pay me to drive through there in any import.

That is an old school rule (if it ever was a rule or just how they did it back then), can get a major for 1 item now, but i got a defect with 3 items and he only gave me a minor, depends on the cop i guess.

Edited by W0rp3D
  On 05/01/2013 at 12:39 AM, W0rp3D said:

That is an old school rule (if it ever was a rule or just how they did it back then), can get a major for 1 item now, but i got a defect with 3 items and he only gave me a minor, depends on the cop i guess.

Depends on cop, i got done for too low with full car load normaly car is legal height, HID lights explained to him it was factory didn't buy it, exhurst too loud so thats 3 items not sure why he didn't say anything about my poking wheels but meh

only gave minor but with 2 fines, cleared it easy just put on stock exhurst and stock globes then swaped it back over

Edited by Johnie
  On 05/01/2013 at 12:20 AM, eightsixboy said:

How did you get a major? I thought major was more then 3 things wrong?

BTW wtf were you doing driving through knox in a gtr lol, you could'nt pay me to drive through there in any import.

It was a major because it was these two things, plus my rear licence plate globe needed replacing. Friggen BS, as I've since found out that my intercooler is stock - he just didn't know what he was talking about. So the only thing he got me for was the headlights (which are actually standard) and a licence plate light globe. I have deliberately kept my ride looking stock as a rock from outside, with no suspension, wheel or bodywork mods, as does the engine bay. So I'm pretty p'd off this happened :(

I wasn't driving in Knox. Was driving back along the beach in Williamstown - was a highway patrol car from the local police station.

  On 05/01/2013 at 1:17 AM, Johnie said:

cleared it easy just put on stock exhurst and stock globes then swaped it back over

Could you please explain how putting the stock globes let you pass? Or is it that some non-R 34s have halogen standard lights?

I've heard you can't just slot the halogens into the HID lights as they won't work??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
×
×
  • Create New...