Jump to content
SAU Community

Recommended Posts

I've noticed a heap of EPA threads about people asking the general process etc. of what happens, so I thought if you have any questions, ask them in the one thread, and chances are they may have all been answered. I've been there twice myself, so I could give some pointers :laugh:

EDIT: R31Nismoid.

Just to note, if people post a question thats already been asked. Your post will be removed.

Also please avoid any chit-chat. This is a factual help thread only

Link to comment
https://www.sau.com.au/forums/topic/156269-the-epa-threadroadworthy-thread/
Share on other sites

As per another thread i had posted :

I got the letter in the mail from when i was defected back in nov....

They were cool very nice and for a change helpful the informative as to what was wrong with the car and how I could go about having each thing fixed, after all the shit i went through with vic roads I was impressed.

I have until the 20th of March the guy was super nice and gave me an extra week to have it all clear in which time i can drive the car around without any worries.

After that Ii can only go to and from place of repair and then high chance of rego getting suspended as per a normal defect...

In regards to what do they look for id prob saying everything the guy who did the check on the car is a qualified mechanic not a wanker who knows nothing about cars.. So he took one look at my turbo and goes lol that isn’t a stocki is it which was cool...

He was cool about my plenum he said end of the day its not going to make all that much of a difference...

I would look at the whole situation as to how you approach the place, if you go pissed off because you have to be there and look like a wanker they will treat you as one and have no respect for you... If you are polite and ask questions to the problems with each thing they pick for your own information more too why are you doing this and this in regards to is it just to piss you off you will find them extremely helpful. EPA are not like vic roads or the police they have a purpose and a law to follow and unlike my original thought before I went the just follow that and go from there… I was even given a modifying a vehicle hand book to help is what I can and cant do which I think most of us all know about

He also informed me of having a test done on the car which is a complete emissions test and although it's expensive ($1300 - $3000) It is possible to pass with an aftermarket ecu, bigger turbo and a few other goodies which we all like to run all we have to do is get it right....

Happy to answer any other questions people have in regards to all this, of course none of it is law as I’m not an epa officer but I can advise as to what I have been told and the encounter I had.

Useful links:

Legal stuff

Traffic Law in Victoria < READ THIS!

Approved EPA Testers

EPA Guidelines (2006)

Is it legal to drive a 33 GTS-t on P's?

The answer can be found here

.....more info in regards to P platers and high powered vehicles can be found on the VicRoads website here

Information on Victorias new graduated licencing system can be found here

Vehicle standards information from VicRoads can be found here

Thread on legal/illegal Mods in VIC can be found here

Information on certification of mods on your car can be found here

VicRoads

Police powers (pdf file)

Confederation of Australian Motorsport

Some information from the EPA in regards to pod filters on EFI vehicles.

262EPAstuff.jpg

Edited by R31Nismoid
  • Like 1

was wondering if i had a screamer pipe installed and was caught by an epa officer, is it an 'on the spot' fine (of $5000 or so i've heard), or do they give you time to replace the mod like other defects?

You'll have to ask the EPA on that one for the clarification.

General practice seems to be you will be reported and the EPA will go right over you.

And yes, if you have a removable screamer you'll still be pinned for it same as a silencer. If its not welded, its no good.

What about silencers/mufflers... do they have to be actually welded into the pipework?

Because my next car i want to set it up so i can easily swap and change just sections of the exhaust instead of changing the entire thing for track and street.

ie. unboltable resonators, mufflers and CATs

Technically any muffler can be "removeable" as they can jut be flanged...

But it only applies the the silencers you see on some jap exhausts etc which are held in by one bolt. Thats not acceptable.

They must be welded into place :P

You'll be right with mufflers/ressie swapping without a drama

I have a question about a "canary" which i got this afternoon, they got me for bald tyres, EBC, cooler/pod, handbrake needed adjusting and my window washer nozel needed adjusting..

Now i'm not complaining as much as it sucks balls, but they said that i need to make an appointment with vic roads and take my car and my roadworthy cert there aswell.. i've spoken to a few friends who have received unroadworthy's in the past years and they said that they dont check your car...

Now is this true? Will vic roads want to see my vehicle prior to removing the sticker and clearing the defect?

Thanks for your help guys...

George

Patience please... Not even 24 hours and you expect a response? :P

Legally your required to take your car there. You must book an appointment in advance, dont try just rocking up and getting one as they could be full.

That said however, you might get lucky if you go there on a Friday @ 3.45pm or there abouts.

Being the line will be out the door VicRoads might take the RWC and clear it on the system without seeing the car.

Its worth a shot, worst case they dont clear it and you have to come back another day with an appointment.

They will just check whats on the notice generally speaking

Being the RWC will pickup anything else that might be unroadworthy on the car like oil leaks, stuffed boots etc etc

So there should not be anything else to pick on. But VicRoads "should" do the usual basic checks i believe.

I think the visit should be about 20-30mins from past peoples expirience.

Cool thanks again Ash, I just hope that vic roads don't bother checking again just in case the police missed something then i have to pay and get another rwc, if that happens my reg will be suspended cos i wont have the time to get it sorted for a second time.. and i hope they don't send me to macloud..

Ok i have another questions now... Can i have an enclosed pod filter and a intercooler or must i be a completely standard air box and intercooler? Or Pod and standard cooler...

But yea i'm curious to know if it only can be standard air box or can you have a pod enclosed in a made up air box?

Thanks again everyone!

almost certain that it will be pod OR front mount, regardless whether the pod is enclosed. I'd imagine the two together would still be considered two intake mods?

yea i thaught so... another thing i wanted to ask was if you go for a test to macloud and you have to go back to stock but you had a high flowed standard turbo, would you have to take it off?

i know i'm asking a few questions but thanks everyone for helping :rofl:

Ok i just had my car cleared through the EPA...

want a Hint on what to do... Make it stock no pod, keep your cooler and u pass simple :D

Cas trust me... If your car has a mod they will ask you to remove it, IF it's a emissions related if u have a 12inch momo non padded center steering wheel they dont care it's not their problem...

Might save a lot of pointless trips for some.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd argue the F50 kit I got is very good value. For ~2k I got the calipers (refurbed condition), adapters, pads, brake lines, rotors, and top hats. I think you'd be pretty hard to get Evo/GTR/350z brembos + the additional hardware for similar money. Used market for a pair of front calipers alone I've seen tend to run anywhere from $1500-2000 depending on condition.    That said, something like a GTR or 350z brembo is a lot easier to adapt to the Silvia. 
    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
    • I was just going to say that it's good to see you picking up the pace again. Hope the surgery goes well. More downtime just means more time to come up with new ways of digging a deeper rabbithole  
×
×
  • Create New...