Jump to content
SAU Community

Recommended Posts

Hi. I noticed when I first got the car that it did not go into OD until it warmed up a bit and thought this was normal.In the last week or so I have noticed it is sometimes not going into OD. I would like to get some feed back to try and negate any costly trany work.Any one have the same thing?

cheers.

The S2 Triptronic has no OD button or power switch ( that I am aware off). It has only done this a couple of times. I just hope its a glitch and not an indication of anything bad to come.

OOPS! I'm only a simple S1, auto driver. See my 4WD thread.

it wont go into od (4th) until its warmed up. But should do so afterwards with no issue.

what he said. Its a feature, not a problem.

Some days mine takes longer to hit 4th gear than others, but I have a book from the car dealer I bought it from that says the transmission will not change into 4th gear (OD) until it is either warmed up or your speed requires it (i assume that means if you go over ~80km/h when its cold it should still change into 4th?).

If you find it has trouble going into 4th gear when it is definitely warm (ie. you've been driving for over 10 mins or so) then I'd be getting it checked out by an automatic transmission specialist. When was the last time you had your Automatic Trans serviced?

Yeah, it's another case of, the factory knows best. It wont go into 4th until the oil reaches a certain temp. Usually about 3k's down the road.

I do believe from experience that it is the tranny oil temp that we are talking about here, as the engine temp doesnt seem to have any bearing.

Thanks for all the info...I should have said this before.... but what I mean is the little change AFTER 4th gear! I assumed this was OD???...maybe its somthing else (lock up???)...or have I got one with five gears?haha..It definatly does have another shift after 4th on mine but only in normal auto..in sports or triptronic mode it stays in 4th...if you put it back to normal auto it does another shift. I guess another S2 triotronic owner could say if their car dose this.

putting it in sports/tipronic mode will raise the revs by around 500RPM and when you put it back into normal mode it'll drop those revs, if thats what you are thinking of as another shift, it's not.

Here is some info I got from an official Stagea site.

Transmission

Dualmatic M-ATx

(Electronically controlled 4-speed Automatic Transmission)

Gear ratio

1st 2.785

2nd 1.545

3rd 1.000

4th 0.694

Reverse 2.272

Final 4.083

so isnt final OD and what Im on about ?

Nup - final ratio is the diff, 'scott nuthin to do with the tranny, you are looking at ALL gear ratio's

Any ratio below 1.000 is overdrive, hence the name OVER drive as in diff being driven at OVER the engine speed

Edited by newbie101
...maybe its somthing else (lock up???)...or have I got one with five gears?haha..It definatly does have another shift after 4th on mine but only in normal auto..in sports or triptronic mode it stays in 4th...if you put it back to normal auto it does another shift. I guess another S2 triotronic owner could say if their car dose this.

Yep that's the lock up converter kicking in, the revs drop as it "locks up" the torque converter. This means there is no slip between the engine and the gearbox, as if you had a manual with a clutch engaged. And it is electronically controlled and must be excluded when the box is put into sports shift mode.

Cheers

Luke

Mine does exactly the same thing. I too thought that it was an overdive on 4th, sure feels like it. But as munch says it is probably the lock up convertor. Mine is only really noticable when I shift the stick into the tiptronic position, and 4 comes up on the dash instead of D. The revs definately drop. I haven't paid much attention to when it does it from cold. I will from now on. I'll let you know.

This is normal operation over 80km/h. I'm pretty sure mine's done it below 80km/h but as a general rule when over 80km/h at fairly constant throttle the torque converter will lock up. The revs may drop a little also.

If you put your foot down a bit (its usually fairly sensitive) it will unlock to allow you to accelerate again...much like dropping back a gear when you put your foot down a bit.

It will lock and unlock as needed, and it often only takes slight movements of your right foot to do this.

Hope that helps :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
×
×
  • Create New...