Jump to content
SAU Community

Complete Rb26det Wrecking - Most Parts Brand New!

druzilla32
 Share

Recommended Posts

druzilla32 Mentor

druzilla32

Posted
Posted

Hey,

If you need any RB26 parts I have probably got it.

See the 3 pages below for pics price and descriptions.

parts page 1

parts page 2

parts page 3

I am uploading pics to pages 2 and 3 right now.

I am in brisbane north, and if you would like to come and lok at the stuff just let me know.

Parts can be picked up from Bracken Ridge or Bulimba.

Parts can also be sent at buyers expense.

You can PM or email me.

druzilla32 Mentor

druzilla32

Posted
  • Author
Posted

Item: Apexi air filters + apexi adapter pipes

Description: good condition, few scratches on pipes

Price: $120

Item: Apexi Power FC + Hand controller

Description: This suits an R32 GTR, Great condition. Has been tuned for 270hp at the wheels at 14psi

Price: $900

Item: Turbosmart boost controller

Description: comes with plate to screw into engine bay. The out pipe has a small split in the end but nothing serious.

Price: $20 SOLD

Item: Auto Meter boost guage

Description: Reads up to 20psi, comes with bracket to bolt onto dash.

Price: $30 SOLD

Item: Turbosmart T Reg Street

Description: Fuel pressure regulator. Comes with attachments ready to install. These are 270 new. This is basically new!

Price: only $160 SOLD

Item: Front strut brace for R32

Description: The ends have been painted gold. Paint is comming off in places.

Price: $60

Item: Rear Strut Brace for R32

Description: Good condition

Price: $60

Item: Arias Forged Pistons for R32 GTR (86.5)

Description: These have some marks on them but can be fixed. A couple have some scratches and some scuff marks on the skirts. Comes with all rings and pins. Rings and Pins are Arias.

Price: $250 SOLD

Item: New RB26DETT Head Gasket

Description: Brand new Nissan head gasket to suit RB26 motor

Price: $50

Item: New Timing Belt For RB26

Description: Brand new Nissan timing belt to suit RB26 motor

Price: $50 SOLD

Item: R32 GTR Standard front pipe (pic soon)

Description: Standard item, few scratches.

Price: $50 $20

Item: R33 GTR crank (pic soon)

Description: Brand new straight from Nissan. Cost $1197 from Nissan

Price: only $950

Item: RB26DETT Gasket kit (pic soon)

Description: Brand new straight from Nissan. Cost $354 from Nissan

Price: $280

Item: Tomei 1.2mil metal head gasket for RB26 (pic soon)

Description: Brand new - cost me $464.65

Price: $350

Item: Reconditioned RB26DETT Head (pic soon)

Description: Rebuilt at Gavin Woods. Has Tomei cams already installed. Ready to drop onto an RB26 block. Looks great!

Price: $3600

Item: Eagle Rods for RB26DETT - Brand new(pic soon)

Description: Never used, comes in box

Price: $700

Item: CP Pistons for RB26 - 87mil (pic soon)

Description: These are also Brand new, comes with all rings/pins. Comes in box ready to go.

Price: $1150

Item: GT3540r Turbo (pic soon)

Description: This turbo only ever hit boost ONCE on the dyno. Nothing wrong with it at all.

Price: $1400

Item: Tial wastgate 45mil (pic soon)

Description: Also only ever hit boost once! Nothing wrong at all. This also has a screamer pipe already atached.

Price: $300

Item: Highmount manifold for RB26 (pic soon)

Description: Cost $1200 new... Still basically new like everything else.

Price: only $820

Item: R33 GTR AFM x2 (pic soon)

Description: 2 Air flow meters. Came from GTR with low kms. These have been used on my R32 GTR.

Price: only $280 for both

Item: Custom intake for single turbo Rb26 (pic soon)

Description: Looks great. Made at Godzilla Motorsport. Comes with silicon hose and clip, ready to instal.

Price: only $200

Item: Custom dump pipe suit GT3540 turbo (pic soon)

Description: Already has 2 holes for o2 sensors.

Price: only $120

Item: Custom front pipe (pic soon)

Description: looks great, will fit dump pipe (above).

Price: only $90

Item: Splitfire coil packs suit RB26 (pic soon)

Description: Basically new. Hit boost once on dyno.

Price: $390

Item: RB26 Big end bearings - Brand new.

Description: New, in box. Cost $85.15 new

Price: $60

Item: RB26 Main bearings - Brand new.

Description: New, in box. Cost $173.80 new

Price: $135

Item: RB26 engine covers

Description: Painted gold, fades to wine red. Paint has chips in it and is bubbled in parts from the turbo. Might want a repaint. Cam covers and front cover.

Price: $120

Item: RB26 Plenum

Description: Painted gold, fades to wine red. Paint has come off from when a mechanic spilt break fluid on it.

Price: $120

Item: RB26 CAS

Description: Crank angle sensor. Painted wine red.

Price: $100

Item: RB26 O2 sensors

Description: Got these new from nissan couple of years ago. Done a few thousands kms.

Price: $60

I have lots of stuff that i dont know the names of too.. so just let me know if your are after something

druzilla32 Mentor

druzilla32

Posted
  • Author
Posted

hey guys,

I have about 16 PMs to get through and I am going through them 1 by 1.

A lot of people are after the same things also.

Please give me some time to reply to PMs

thanks,

druzilla32 Mentor

druzilla32

Posted
  • Author
Posted

page updated with parts that are sold.

Those people who pmd me just see if yours has sold or not.

wastegate sold

plenum/engine covers sold

coilpacks sold

gasket kit sold

still have lots of stuff like:

crank, pistons, turbo

will sell turbo + custom intake + front/dump pipe for $1750

nugget400hp Community Regular

nugget400hp

Posted
Posted

Gday champ,

I need a r33 gtr crank, mine failed crack test, do u still have one and what is your lowest cash price,mail 2day.

druzilla32 Mentor

druzilla32

Posted
  • Author
Posted

parts updated with sold/pending sold etc.

still have turbo, crank and 2 sets of rods + other stuff for sale

new item added:

Item: REV Billet conrods for rb26

Description: These were in my RB26 before the number 2 bearing spun. You can see a few marks on the no.2 rod. and you can see where it overheated. The others are fine, so may want to get no2 looked at or buy a new one seperatly.

Price: $200

PICS at bottom: http://www.thegodzilla.com/car-parts-for-sale3.php

Roy Grand Master

Roy

Posted
Posted
Item: Reconditioned RB26DETT Head (pic soon)

Description: Rebuilt at Gavin Woods. Has Tomei cams already installed. Ready to drop onto an RB26 block. Looks great!

Price: $3600

Can you scan any copies of the rebuild receipt? Im interested what has been done to the head. Any porting what did the rebuild entail.

Also, what does the price include? Rocker covers, inlet manifold and ancillaries? Also what cams, duration and lift?

The Mafia Grand Master

The Mafia

Posted
Posted

RB26 Plenum - Does this come with the Throttle bodies, if not, are you able to supply them.

If this is with the throttle bodies - then sold to me.

But please, I want first preference after discussion.

Thanks - PM Sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      Ah, fair enough. For the IAT, I'm using a legit GM sensor that was used on the car prior to my current build. I'll get another wideband and IAT ordered and follow up when they show up. Thanks for the help.
    • GTSBoy
      RB20DET lean on cold start

      By GTSBoy · Posted

      You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • A31Skyline
      Rb20e and RB20DET parts

      By A31Skyline · Posted

      yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      Unless my sensor just died, was only a couple months old, I strongly believe it didn't. How can I test it? I never mentioned it being 20:1+?
×
×
  • Create New...