Jump to content
SAU Community

Recommended Posts

just saw bobo's thread on personal import scheme and was wondering what was involved to qualify for a personal import per year eg. how long must you live in japan - do you need japanese citizenship etc.? and what exactly do you avoid in terms of compliance when importing using the personal import scheme?

would appreciate any feedback, and if this question has been asked or covered before i apologise i did search, but please link me to the appropriate thread... cheers.

See here: http://www.dotars.gov.au/transport/safety/...rting.aspx#5.06

Must own the vehicle for 12 months, be an Aussie citizen / PR or applied to become one, and have relevant car documentation as per the link.

The work required when the car gets here depends on the state, as there are different requirements. Basically though the car needs to meet ADR requirements (usually satisfied through an engineering certificate &/or inspection by the registration authority).

What you save over the normal SEVS scheme is the cost, and your car can be modified (provided you can meet the requirements in the para above).

See here: http://www.dotars.gov.au/transport/safety/...rting.aspx#5.06

Must own the vehicle for 12 months, be an Aussie citizen / PR or applied to become one, and have relevant car documentation as per the link.

The work required when the car gets here depends on the state, as there are different requirements. Basically though the car needs to meet ADR requirements (usually satisfied through an engineering certificate &/or inspection by the registration authority).

What you save over the normal SEVS scheme is the cost, and your car can be modified (provided you can meet the requirements in the para above).

We should be a little more clear about this to avoid confusion:

You must have owned the car for a full 12 months while living overseas with it, you may also be required to show proof that you were the main driver of this car while living there.

When returning to Australia you must either be an Australian citizen or permanent resident, or be prepared to apply for PR status and provide proof that you are moving back here permanently with some of the following documents:

- freight of personal possessions from overseas

- enrolment of children in school

- opening bank accounts

- employment contracts

- house rental or purchase paperwork

- connection of services in your name (power, gas, water)

- anything else that shows commitment to stay in Aus

The main advantage of importing a car under these laws is that you can import any car regardless of make or model (unlike the limited models allowed under the SEVS compliance laws)

For compliance there are a few things that will not be required however the main point is that you don't need to go through an RAWS workshop who has huge overheads like with SEVS compliance. You can expect most personal imports to cost around $600 to $1,000 for the compliance work needed (compared to $2,500 to $4,500 for SEVS)

Just wanted a little bit more info from one of the J-Spec guys or Razor on this if I could.

Says you need proof that you are returning to Aus.

Does this mean that you could only ever do one personal import, as you would have to do it when moving back from Japan? Or otherwise keep moving back and forth b/w the 2 countries?

Or can you do one a year for as long as you are there and say that you intend to move back to Aus at some later stage? Obviously living here atm I have an Aussie address and bank accounts etc. Woud those be enough if I keep them to show intent to move back here permanently?

The reason I'm asking is that I may move to Japan at some stage, and there are a few cars on my list that I would love to bring back over, so if it was possible to live there for say 3 years and bring 3 over that would be awesome.

Just wanted a little bit more info from one of the J-Spec guys or Razor on this if I could.

Says you need proof that you are returning to Aus.

Does this mean that you could only ever do one personal import, as you would have to do it when moving back from Japan? Or otherwise keep moving back and forth b/w the 2 countries?

Or can you do one a year for as long as you are there and say that you intend to move back to Aus at some later stage? Obviously living here atm I have an Aussie address and bank accounts etc. Woud those be enough if I keep them to show intent to move back here permanently?

The reason I'm asking is that I may move to Japan at some stage, and there are a few cars on my list that I would love to bring back over, so if it was possible to live there for say 3 years and bring 3 over that would be awesome.

Basically you would have to convince DOTARS that you are going to stay here in Australia rather than just spending a week here on holiday before moving back overseas, however once they are convinced and the import approval has ben issued then you can head back overseas again if you like.

There are quite a few guys living in Japan who come back to Australia once every year or so and being a personal import with them, I think it's easier for a returning resident than it would be for a foreign passport holder too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Been so long since I have been here,seeing SDU is dead. I had that problem on my gtr in 2006 but luckily there was no engine damage,it was inspected by Hytech Engines,race bearings and extended crank collar put in and that was about it. Hopefully yours is sorted now.
    • Would it not be cheaper to just spray nitrous?
    • I've got cash, it's the NA LOLS I'm after now Plus, I've had a few boosted cars, and it is soooo easy to turn a reliable car into a unreliable drivetrain eating money pit monster by just paging up and chasing more My power goal for the NC is to try for a reliable naturally aspirated 150kw or 200hp atw (I'm old, and the old naturally aspirated cherry of 100hp per litre is a goal that I would like to hit), no more is really needed for what I use the car for,  so a additional 5kw is what I'm chasing now,  that 5kw is about $3k away, I think....
    • I dunno. I just go off what I know works. On RB20, the idle switch meant something to the ECU and the potentiometer was ignored. In Nistune, with the switch unplugged, you could bridge the terminals in the loom connector and see IDLE come on and off. Not so by moving the pot. The R32 RB20 ECU and the 26 ECU both look like this. Sure there is the "throttle sensor" (pot) on pin 38, and also sure, the idle switch is also directly wired to the TCU, whereas the pot is only directly conected to the ECU. But I am sure that the throttle position from the pot is passed to the TCU across the data bus on pins 21, 22 & 31. Maybe the ECU likes to know throttle position, but it sure as hell doesn't use it to determine the idle condition. Meanwhile, on the later engines, like the 33 25DET and my Neo, you remove the TPS and move the pot to-from the 0.45V position, and IDLE comes and goes in Nistune. No throttle switch on the ECU diagram. Just the pot.
    • So, good news and bad news Bad news first: The intake plenum is lost in the mail apparently, I haven't paid for it yet, and MX5 Mania are still chasing it up, farking 'Merica postal service  Good news: Any retune will be free if and when it turns up,  I'm still keen for them to throw it on The car goes noticeably better, with only the typical initial take off thingie from a choppy cam and manual transmission, but giving it just a little more RPM than before gives it a smooth take off (and hour or so of peak hour traffic sorted that little skill out) Car made around 145kwatw & 225Nm (Intake may get me to 150kw, maybe....🤣) Weirdly, 145kwatw is the same max power that my standard 2015 WRX STI made a few years ago The cam really comes alive from around 3.5k and keeps making power and holds it flatish all the way to 7k, whereas before torque would drop hard around at 4.5k Drive home was sadly in peak hour, although I did get a little clean air here and there to wind out 1st and 2nd a little bit, and whilst the gains aren't anything for the "boosted boys" to be impressed at, the thing is a blast to drive The sound in the vid is poor, as it is in a undercover yard at work, but, outside, in the wild, it sounds awesomeballs to my ears with all the choppyness I consider it money very well spent for the outcome  Cam specs for reference (Basically the biggest you can fit with stock pistons) 20250417_171807.mp4   LOL, I don't think I will ever grow up  
×
×
  • Create New...