Jump to content
SAU Community

Questions About Regency.

rad100

By rad100,
in South Australia

 Share

Recommended Posts

rad100 Grand Master

rad100

Posted
Posted

hey guys,

just about to go to my first regency meeting and just wondering if i need to remove my e-boost, timer. also is a r32 front bar legal on a gts-t 32? and do i need the stock exhaust on??? cd players and intercoolers r legal?? oh and amps and 6x9's?

cheers guys.

Link to comment
https://www.sau.com.au/forums/topic/156688-questions-about-regency/
Share on other sites
Bl4cK32 Grand Master

Bl4cK32

Posted
Posted

anything that is classed as a boost controller that is non std, take it off, as well as a timer.

R32 gtr front bar u mean? No its not illegal, as long as its secured properly...

Stock exhaust isnt necessary as long as u have a cat converter, and its quiet (below 90dB i think it was??)

Cd players are fine, intercoolers are fine as long as pipework follows std routing ie no holes cut into the cars structure to fit it...

amp is fine (needs to be secure) and 6x9's - if their in the rear parcel shelf no they are not as they obstruct the child restraints -which must also be installed.

Any other q's - ring regency as on the internet u get misguided info that only regency can answer 100%.

rad100 Grand Master

rad100

Posted
  • Author
Posted

haha its funny coz my parcel shelf never came with child restraints its like a thin mdf as my parcl shelf!!! i mounted my own 6x9's lol i just like lifted the parcel shelf out.... what the???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Rebuilt Rb25det issues

      By GTSBoy · Posted

      Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Victory
      Neil's R33 Gts-t Build

      By Victory · Posted

      Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Milkmun
      S15 Spec R

      By Milkmun · Posted

      Wow that's a steal, you've done well there. 
    • trey318
      r34 gtt led globes

      By trey318 · Posted

      Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
    • KyoyaR33
      Rebuilt Rb25det issues

      By KyoyaR33 · Posted

      Howdy all,   I had my rb25det S2 rebuilt and finally started it today but have run into a few issues  Engine sounds like a a diesel easiest way to summarise like small ticking, gets louder when revs are slightly adjusted  The engine builder repainted the engine cover leaving no where for me to go off with lining up the CAS so have it as central as possible so not sure it that could be affecting it?, changed the gearbox fluid too but won’t seem to go into gear when running, and only 1 to 4 when off having a hard time finding 5th and reverse anyone got any ideas or a base for me to start off? much appreciated 
×
×
  • Create New...