Jump to content
SAU Community

Recommended Posts

I was coming back from the gym at monash yesterday, and I decided to rev it to 100km/h on the fwy ramp. But it seemed like the clutch was slipping or something. Here is what happened...the revs were climbing, the speed was not climbing...and the car was getting twitchy. Mine has only got 164rwkws, with a turbo back exhaust and pod. Surely this is not powerful enough to give wheel spin on a straight line and on a dry road (cos its never happened before). Is my clutch on the way out? Or is it just that my tyres are not tready enough?

Mind you, after that I drove carefully.

Also - is it normal for black smoke to come out when revving? Apparently there was some smoke that came out when i hit the fwy ramp (my friend was travelling behind me).

Thanks all

Ps: http://www.skylinesaustralia.com/forums/in...clutch+slipping

i think its similar to what this guy experienced...so im tending to believe that it could be my clutch..but id like any opinions.

And if so, what model of the exedy clutch would be good (bear in mind, im thinking of doing mods later this year).

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/
Share on other sites

yeah sounds like shes shagged. go for the exedy hd cushion 8 button clutch there really good. i got one and its not to heavy not to light an the missus can still drive it. apparently they can handle up to 300rwkw

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2912773
Share on other sites

let me know how long the button clutches last with everday driving. they grip very well but I found that it wore my flywheel out as well as the disc but mostly the flywheel. I all for brass/ceramic friction materials but not for everyday driving. I'll stick to HD organic or twin plate, but thats only my opinion they get better everyday with there designs.

a good way to tell if your clutch is slipping is to get on the high/freeway at about 100ks in 4th or 5th, moderately warm and keep the throttle flat so the cars under full load then fan/feather/kick the clutch ( quickly tap it down past friction point then release) and if your revs go up( they will a little but only due to the clutch being pushed in) and with the clutch pedal all the way out continue to rise then yeah its on the way out, or take it to a workshop but it sucks to not know exactly what people mean, its good to experience it for yourself so that your learn.

Edited by mattymagoo22
Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2914278
Share on other sites

crazy..thanks for the replies :)

i will check some more...i still got till june before i get my next service...so i will test it till then. but yeah, that day it was just acting wierd - either there was no traction or its likely that the clutch is flocked

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2914347
Share on other sites

hey there,

after a drive do you smell anything burning? if you do, it could be clutch burn.

a few months ago my clutch started to slip in 4th, but the longer it went on, it started to slip in 3rd...2nd then finally it was starting to slip in 1st. once its gets to 1st gear, the clutch is on its last legs.

i think if you can? take ur car to the clutch specialists in your state, and ask them to check your clutch for u. it really shouldnt cost you anything. got my clutch changed with a xtreme heavy duty cushion button. they are 25% heavier than stock. they are grippy and require an "on or off" engagement. not too bad for street driven cars.

cheers

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2914433
Share on other sites

Clutch slip is fairly easy to diagnose against wheelspin, with clutch slip the car will go practically nowhere (you won't feel any acceleration), whereas wheelspin you'll still be generally accelerating.

A lot of black smoke out the back will be clutch dust. You can usually smell it too if you did a good job. Time for a new clutch if it keeps happening. They usually get worse with time, so see how you go, and if it gets worse then its time for a better clutch.

Fixxxer

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2914475
Share on other sites

  • 4 years later...

I replaced my clutch with a heavy duty button clutch. NOT fun to drive everyday and it lasted at least 40k but same problem is happening to me right now. So I'll have to take mine in and I'm planning on getting a standard clutch

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-5880059
Share on other sites

Same as everyone else my clutch slipped in 2nd whilst trying to overtake a truck. Scared the pants off me. Burnt clutch smell took a week to go away after I had an exedy HD clutch put in. I regret going HD... daily driving it was too heavy in stop start traffic.

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-5880287
Share on other sites

easy.... put it in 5th at about 50kmh, put your foot down and you'll soon see if its slipping.

yep does it in 3rd... :(

Same as everyone else my clutch slipped in 2nd whilst trying to overtake a truck. Scared the pants off me. Burnt clutch smell took a week to go away after I had an exedy HD clutch put in. I regret going HD... daily driving it was too heavy in stop start traffic.

SAME!

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-5881093
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...