Jump to content
SAU Community

Recommended Posts

does this mean the battery is dead?

only thing that has been a bit confused is it jumps back to 12v when its sitting idle (not started)

when it's running via a push start, i get about 12v across the alt, and 12v at the battery.. so I'm thinking the alternator is still ok?

I'd check the Current but I blew the fuse on my multimeter a while back :D

Link to comment
https://www.sau.com.au/forums/topic/156766-battery-drops-to-6v-on-start/
Share on other sites

That means that your battery is 'old' or quite small or both.

Iff you go to your local battery world, they have a load tester. If you get them to run the tester on it, they can show you the voltage drop for different loads.

If you're havivng problems e.g. hard to start on cold mornings, then replace it.

If you're not having any problems, then elave it until you do

don't use your multimetre to do stuff like that

Hey Gordon. I agree with Deuce Bigalow. When my battery was on the way out, it'd read 12V static, then drop to 8V on start.

With a jump start, it'd sit nicely on 14V.

As an aside, I recently had issues with the battery that I thought was caused by the alternator - it turns out the battery terminals were corroded and preventing the from alternator charging the battery.

When I took my battery to have it checked, the report was that it was still good just flat. It sounds like yours may just be dead.

You battery is sulfated & f*cked... you've got just enough juice to start, then your car is running off the good graces of your alternator, which maybe putting stress on the alternator.

Don't bother load testing as what you have already done is a heavier load test than one they will have.

Well its 'around 12v' when it's started.. it was probably 14v off the alternator, can't exactly remember. I put new terminals on it a few months back, so the terminals should be in good nick.

I actually took it to battery world a couple of months ago (which is where I got it from).. their response was "it's not the battery, it must be something else". I think they were just trying to dodge their you-beut 3 year warranty :)

I think because it just has an alarm and a few things, if I leave it for a week or so it goes dead, and it was just a cheapy Century one for around $100. Only 12 months old :P

Thanks for your help guys.. Think.. none of this cheap ass stuff this time. Think it's time to lash out $300 for a proper Optima or the like. It doesn't get driven that often so needs something that is up to the task.

If there still is troubles I'll investigate a few other things.

I read elsewhere in a different thread that bad starting can be due to a bad earth somewhere. Essentially there is not enough amps to get it started :)

On a side note, Another guy at work said hard starting could be something with dirty injectors and/or sucky spark plugs, taking ages to start flowing/sparking properly, but I'm going for the amp things and say battery or earth.

W

I actually took it to battery world a couple of months ago (which is where I got it from).. their response was "it's not the battery, it must be something else". I think they were just trying to dodge their you-beut 3 year warranty :(

The same thing happened to me, as I mentioned above. As has been discussed, it could be terminals/earth/alternator. It'd be worth taking it to an auto elec and spend $60 on an hour of testing rather than throw $300 at a car with a bad earth?

Even a cheap battery (eg. mine is a supercharge gold) should last a few years. Yours should still be good dude.

If you take it to battery world, they'll tell you if it's the earth or terminals or whatever. Of course, different stores are of different degrees of help, but they do install batteries, and terminals, so they know if it's a dirty terminal or if it's the battery.

The first thing they'll do is probably clean the terminal before they do the load test.

The good thing about them, is they have the tester, and they don't charge you labour!

Battery world sell this really good battery called amaron. It is a silver calcium battery. For those that know about batteries, you'll know that silver calcium is very high quality. Lots of starting charge, good life, etc. They're maintenance free too. They're cheap as. About $80 for a big one (forgot the size).

I use one of those in my daily. I dont' use one in my r33, because I have a sealed one for the boot.

I wouldn't pay an autoelect $60 when you can get a new b82rz for $80.

Just get b82rz world to check it. If it's terminals, they'll just replace them. having terminals replaced costs $10!

If it's the battery, then get a new one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
    • I'm interested,do you still have it?
×
×
  • Create New...