Jump to content
SAU Community

Recommended Posts

:shrug: its not about a high horse

its about someoen offering less than half of retail for a set of coilovers. you cant even get them this ceap on YAJ.

but its ok. im in no rush

average depreciation on a used coilover is 40%

look at yahoo auctions japan

smarten up...i sell parts to the states on a daily bases.

its ok, because a serious tuner would know the advantage of these coilovers....and i hope they end up in teh hands of someone that will, instead of a lowballer.

How can you Quote and "average" % with out a time frame? 40% over how long or used how many times? Where do you get your information for this "40%" your statement is floord you have no basis to make such a statement. I personally think you are just trying to "talk smart" in order to justify a price for a set of banged up coilovers that were used for many track days

Hahahaha you would have to be the worste kind of salesmen I've ever seen on any forum, kind of like a strung out drug dealer, when people dont want your dodgy product you blame the consumer. I think your desperation to get rid of them show's a little to much. Your almost at the point where you wont even be able to give them away to any one on this forum.

:shrug: its not about a high horse

its about someoen offering less than half of retail for a set of coilovers. you cant even get them this ceap on YAJ.

but its ok. im in no rush

I dont recall any one offering you any thing.

"might be inclined" was the term i used

Edited by loymclure

actually, ive had 4 offers, and all are waiting for me to pull them off the car

just becuase its not in a thread, doesnt mean its not there...

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...