Jump to content
SAU Community

Recommended Posts

oh yeah also with gtr rotors and calipers is it possible to fit them onto s13 coilovers? like i know it has the 100mm spacing but someone told me that the rotor could scrape or something not sure

cheers in advance

As far as i know they go straight in with no mods to engine mounts or anything you just need to do a bit of cutting and shutting with the radiator hoses

This link should help with the RB20DET conversion

http://wiki.r31skylineclub.com/index.php?t...T_into_your_R31

Cheers Josh

oh na i know about the engine conversion thats easy as pie i just really wanna know what the differences are with the r32 and r31 steering racks is is the 32 better and why? and also what type of irs setup would be the cheapest and easiest option i know no irs is gonna be easy but the easiest coz i know the 33 irs is meant to be the best conversion but.... thats alot of money would the r30 rear end get up in there? with welding and new mounts and shit and also was a question about gtr brakes going onto s13 coilovers would the rotor be touching the caliper on the outside of the rotor and do you need spacer's? just a few questions i need to clear up before this shit gets bought

thanks

The shafts from the diff to the wheels will need to be custom, as im certain the R31 is wider, you will need a customised driveshaft too.

to get IRS on a R31 is a BIG job... the trailing arms need mounts to pivot in and things like that.

If you have a car stand and rip out the old live axle shit and then put the IRS stuff in the approx location you want to mount it, you will see alot of custom mounts will be needed to make it fit...

A Z31 (300zx) has IRS with a mutha R230 diff, (nissan equivalent to 9 inch) the track on them is wider (shafts are longer)and may be more suited...

you would be looking at more fab work and dicking around than putting the RB in!

ok cheers about the steering rack info but yeah my mate just wants irs in his 31 and is prepared to spend time and money on it but if its more drama then its worth he prob wouldnt want it cheers anyway

you want an irs 31, buy a HR31.

i dare say itd be far too much dicking around to fit irs to an aus-mod 31, you'd probably have an incredibly hard time making it legal aswell.

yeah might go with a passage or a 2 door dunno yet but my mate wanted to fit irs into his aussie delivered 31 but.. i thought i would ask about it anyway cheers for the advice people

cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's the thing. Cam is smaller than before.. though the old cam was +6 degrees advanced. We're talking huge changes here, the narrowbands want to trim out 20% of fuel and pull the (wideband) idle to like 16.0 AFR or such. One side is a little more trimmy than the other. Think along the lines of ~20% to ~15-18%. Unfortunately my scouring of the internet hasn't really found anyone with this issue. People either just disable NB's or have them wildly different, where one is -20% and the other is +20 or 0 (i.e a sensor is just dead/wiring is just busted). Turning them off and relying on the base map only results in the wideband reporting at about 14.0 with the Varex closed. It'd be a little leaner (closer to 14.7ish) with the Varex open. I know I can just change the switch points so that the narrowbands agree with the wideband, but it's still odd. Both of them are reading voltage, it's just that they're reading quite high mv, in the ~800 region. It's just odd. This was with the IAT fudged to report it was about ~22 degrees which is my guesstimation of the temperature in the room. I have an OEM sensor ready to try tonight, which is slow and crap - but .. worked last time I used it. Sadly I am aware that idle tuning with the big TB is going to be a PITA and I look 'forward' to many hours spent stalling or stumbling idle or delving into drivability things.
    • The GTR strut brace clears the new manifold.. by about 0.5mm. So this means I need to buy an OEM GTT Strut brace (again), which will clear the new manifold, but not the bonnet vents. I guess I can sell the GTR Strut brace with the bonnet with the vents as a package deal as someone will need this one day. So my choices are vented bonnet but no strut brace, or GTR Bonnet with OEM brace (which I have to buy) but is bright red instead of the same colour as the rest of the car, which means the entire front end of the car will just be red until it goes back to paint jail. In other news the engine starts and doesn't leak. Why both O2 narrowband sensors think the tune is rich AF I do not know. The idle is also pretty shitty and my expensive IAT sensor from the USA is dead. The car sounds awful. But I assume or at least hope this is due to the many exhaust leaks, and the concrete garage it is in, sitting there with 0 intake bolted to it, and no bonnet or panels or anything to stop the induction/intake sound which is about 200db.
    • C'mon! At least come kicking and screaming into the 2000s. BA XR8 bulge.
    • No such thing as E30 in Sydney servos As stated above, flex fuel is your only viable,  and "safe" option I believe
×
×
  • Create New...