Jump to content
SAU Community

My R32 Slider

RBdrift

By RBdrift,
in Engines & Forced Induction

 Share

Recommended Posts

RBdrift Rookie

RBdrift

Posted
Posted (edited)

Hi guys Im new to this site and I thought I would post a few pics up of my R32 drift pig. From experience I would have to say that a 32 is easier to slide than an s13 plus its a skyline haha. RB20's are the bomb. This car lived on limiter while I had it and nothing broke at all except for the stock turbo.

Heres a pic of the thing after me and some mates got got wasted and decided we were fullsick (sarcasm) graffiti artists haha $.post-35562-1171911349.jpg

I live in Townsville and I bought it from some dude down on the coast for $7k with a roadworthy (dunno how he got it cause every thing but the engine was stuffed).

List of mods:

Replaced stuffed shocks with less stuffed JIC coilovers

rb25 turbo (rear wheel on the stocker cried enough and tried to escape out the exhaust).

front mount

screamer pipe off the internal gate

set of 18 inch dishies (nicked of my soarer)

gtr drivers seat

nismo 2-way diff

new r32 gearbox

new exedy clutch

front and rear strut braces

tubosmart bleed valve set at 0.9 bar

made 162 rwkw on dyno dynamics dyno

The rest of the pics show it in various stages. Anyhow me and a mate from uni ended up giving it a backyard 2pac paintjob in that baby blue commodore colour and fitting a URAS kit.

Just sold it and I thought I'd be happy just cruising around in my soarer ( manual got a Trust T78-33d ) but Im having RB withdrawls so if anyone is selling a manual R33 gts25t for $11-13k pm me.

post-35562-1171911479.jpg

post-35562-1171911567.jpg

post-35562-1171911660.jpg

post-35562-1171911742.jpg

post-35562-1171911852.jpg

post-35562-1171912023.jpg

post-35562-1171912161.jpg

post-35562-1171912252.jpg

Edited by RBdrift
Link to comment
https://www.sau.com.au/forums/topic/157140-my-r32-slider/
Share on other sites
RBdrift Rookie

RBdrift

Posted
  • Author
Posted (edited)

markimak. yeah in hindsight it was pretty foolish. but the paint was shagged anyway so it didn't matter.

In the end it turned out OK and I had to sand all that crap off of it while prepping it for paint so I learnt a fair bit at the same time.

Dude if you think I would do that to a clean GTR like yours or something, you are mistaken :laugh:

Edited by RBdrift
Link to comment
https://www.sau.com.au/forums/topic/157140-my-r32-slider/#findComment-2921137
Share on other sites
markimak Grand Master

markimak

Posted
Posted
  RBdrift said:
markimak. yeah in hindsight it was pretty foolish. but the paint was shagged anyway so it didn't matter.

In the end it turned out OK and I had to sand all that crap off of it while prepping it for paint so I learnt a fair bit at the same time.

Dude if you think I would do that to a clean GTR like yours or something, you are mistaken :(

haha.. things ppl do when drunk..

anyway.. gl with ur R33.. :D

Link to comment
https://www.sau.com.au/forums/topic/157140-my-r32-slider/#findComment-2927028
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Blue slip

      By Duncan · Posted

      You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • Duncan
      Ethanol Content Sensor - Always at 11%?

      By Duncan · Posted

      yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
    • thatjawncrazy
      Another "where do these lines and plugs go" RB25DET question

      By thatjawncrazy · Posted

      GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
×
×
  • Create New...