Jump to content
SAU Community

Recommended Posts

Hi guys Im new to this site and I thought I would post a few pics up of my R32 drift pig. From experience I would have to say that a 32 is easier to slide than an s13 plus its a skyline haha. RB20's are the bomb. This car lived on limiter while I had it and nothing broke at all except for the stock turbo.

Heres a pic of the thing after me and some mates got got wasted and decided we were fullsick (sarcasm) graffiti artists haha $.post-35562-1171911349.jpg

I live in Townsville and I bought it from some dude down on the coast for $7k with a roadworthy (dunno how he got it cause every thing but the engine was stuffed).

List of mods:

Replaced stuffed shocks with less stuffed JIC coilovers

rb25 turbo (rear wheel on the stocker cried enough and tried to escape out the exhaust).

front mount

screamer pipe off the internal gate

set of 18 inch dishies (nicked of my soarer)

gtr drivers seat

nismo 2-way diff

new r32 gearbox

new exedy clutch

front and rear strut braces

tubosmart bleed valve set at 0.9 bar

made 162 rwkw on dyno dynamics dyno

The rest of the pics show it in various stages. Anyhow me and a mate from uni ended up giving it a backyard 2pac paintjob in that baby blue commodore colour and fitting a URAS kit.

Just sold it and I thought I'd be happy just cruising around in my soarer ( manual got a Trust T78-33d ) but Im having RB withdrawls so if anyone is selling a manual R33 gts25t for $11-13k pm me.

post-35562-1171911479.jpg

post-35562-1171911567.jpg

post-35562-1171911660.jpg

post-35562-1171911742.jpg

post-35562-1171911852.jpg

post-35562-1171912023.jpg

post-35562-1171912161.jpg

post-35562-1171912252.jpg

Edited by RBdrift
Link to comment
https://www.sau.com.au/forums/topic/157140-my-r32-slider/
Share on other sites

markimak. yeah in hindsight it was pretty foolish. but the paint was shagged anyway so it didn't matter.

In the end it turned out OK and I had to sand all that crap off of it while prepping it for paint so I learnt a fair bit at the same time.

Dude if you think I would do that to a clean GTR like yours or something, you are mistaken :laugh:

Edited by RBdrift
Link to comment
https://www.sau.com.au/forums/topic/157140-my-r32-slider/#findComment-2921137
Share on other sites

markimak. yeah in hindsight it was pretty foolish. but the paint was shagged anyway so it didn't matter.

In the end it turned out OK and I had to sand all that crap off of it while prepping it for paint so I learnt a fair bit at the same time.

Dude if you think I would do that to a clean GTR like yours or something, you are mistaken :(

haha.. things ppl do when drunk..

anyway.. gl with ur R33.. :D

Link to comment
https://www.sau.com.au/forums/topic/157140-my-r32-slider/#findComment-2927028
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...