Jump to content
SAU Community

My R32 Slider


RBdrift
 Share

Recommended Posts

Hi guys Im new to this site and I thought I would post a few pics up of my R32 drift pig. From experience I would have to say that a 32 is easier to slide than an s13 plus its a skyline haha. RB20's are the bomb. This car lived on limiter while I had it and nothing broke at all except for the stock turbo.

Heres a pic of the thing after me and some mates got got wasted and decided we were fullsick (sarcasm) graffiti artists haha $.post-35562-1171911349.jpg

I live in Townsville and I bought it from some dude down on the coast for $7k with a roadworthy (dunno how he got it cause every thing but the engine was stuffed).

List of mods:

Replaced stuffed shocks with less stuffed JIC coilovers

rb25 turbo (rear wheel on the stocker cried enough and tried to escape out the exhaust).

front mount

screamer pipe off the internal gate

set of 18 inch dishies (nicked of my soarer)

gtr drivers seat

nismo 2-way diff

new r32 gearbox

new exedy clutch

front and rear strut braces

tubosmart bleed valve set at 0.9 bar

made 162 rwkw on dyno dynamics dyno

The rest of the pics show it in various stages. Anyhow me and a mate from uni ended up giving it a backyard 2pac paintjob in that baby blue commodore colour and fitting a URAS kit.

Just sold it and I thought I'd be happy just cruising around in my soarer ( manual got a Trust T78-33d ) but Im having RB withdrawls so if anyone is selling a manual R33 gts25t for $11-13k pm me.

post-35562-1171911479.jpg

post-35562-1171911567.jpg

post-35562-1171911660.jpg

post-35562-1171911742.jpg

post-35562-1171911852.jpg

post-35562-1171912023.jpg

post-35562-1171912161.jpg

post-35562-1171912252.jpg

Edited by RBdrift
Link to comment
Share on other sites

markimak. yeah in hindsight it was pretty foolish. but the paint was shagged anyway so it didn't matter.

In the end it turned out OK and I had to sand all that crap off of it while prepping it for paint so I learnt a fair bit at the same time.

Dude if you think I would do that to a clean GTR like yours or something, you are mistaken :laugh:

Edited by RBdrift
Link to comment
Share on other sites

markimak. yeah in hindsight it was pretty foolish. but the paint was shagged anyway so it didn't matter.

In the end it turned out OK and I had to sand all that crap off of it while prepping it for paint so I learnt a fair bit at the same time.

Dude if you think I would do that to a clean GTR like yours or something, you are mistaken :(

haha.. things ppl do when drunk..

anyway.. gl with ur R33.. :D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • That is typical (for a rb at least) with a medium to large turbo, noting the format of the graph is probably misleading what you see a little (half portrait width but full height, in landscape it would look quite different) Basically until it hits target boost the torque curve is rising steeply, when that is 4000+ rpm it is not great to drive since almost all of your life is between 1,000 and 3,000 rpm. Once you hit target boost the wastegate opens and torque stops rising so quickly. From there the shape of the curve depends mostly on the cams and where they have a peak vs the rev limiter
    • Last of the maintenance items for now....not sure why but the drivers side window switch had heaps of wear on the right front and right rear switches Unfortunately, unlike earlier Skylines the controls are bolted to the door trim from the inside. So....off the with door trim. There are bolts or screws: Behind the door handle cover, pop it off from the handle side Under the rubber trim at the bottom of the door pull (also just pops up) Behind the courtesy light at the bottom. Other than that, just window down then pop off the usual selection of push in clips around the perimeter and the trim lifts up Interesting that they have a bolt on cover instead of the old school plastic held on by goop....I guess they prioritised sound levels over price Then, 2 screws and 2 plugs to replace the switch (looks identical to the Fuga/Q70 one incidentally) and put it all back together. Also much better
    • ok I understand, but the majority of turbo vehicles lose torque, or have a flat torque curve after the spool.  hence my initial misunderstanding. I didn't think this type of curve was possible  
    • It is completely normal. Your original understanding is what was wrong, not what you see in the charts.
    • made with turbo and tuned by (hypergear)
×
×
  • Create New...