Jump to content
SAU Community

Orc Twin Plates

N1GTR
 Share

Recommended Posts

N1GTR Grand Master

N1GTR

Posted
Posted

Hey guys,

I have to buy a new clutch for my R32 GTR and i stumbled into these on nengun.

There's one rated for 700ps, price isnt bad either Link to site - http://www.nengun.com/orc/709-series-twin-plate-clutch-700ps

Anyone used one before? Anyone got one?

Tell me your opinions :wave:

Link to comment
https://www.sau.com.au/forums/topic/157154-orc-twin-plates/
Share on other sites
rinmak Proficient

rinmak

Posted
Posted
I've been running a 709D on my RB25 for about 2.5 years now. Light and very well made. Hooks up very well. I'm using a standard RB25 slave cylinder on mine and the pedal pressure feels similar to a standard clutch.

Really? Does that make it hard to drive at all? I find light pedals + harsh clutches are a bad combination personally.

Link to comment
https://www.sau.com.au/forums/topic/157154-orc-twin-plates/#findComment-2941264
Share on other sites
  • 1 month later...
klys Apprentice

klys

Posted
Posted

Can anyone help me?

I bought an ORC 709D Clutch, I already have an unknown twin plate in there.

so I have a shorter bearing carrier. I also have an aftermarket NSK bearing(That I had installed last year)

Will I need to buy a new bearing for this one. What do I need to look for in a bigger slave cylinder? part # please?

any info is welcome!

THANKS!

Link to comment
https://www.sau.com.au/forums/topic/157154-orc-twin-plates/#findComment-3022575
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted
Really? Does that make it hard to drive at all? I find light pedals + harsh clutches are a bad combination personally.

Nah the ORC/BLITZ clutches have a very pregressive pedal even though it is light, once the OS is shagged in ours it is getting the flick for anothe ORC/BLITZ twin.

Link to comment
https://www.sau.com.au/forums/topic/157154-orc-twin-plates/#findComment-3023970
Share on other sites
  • 3 weeks later...
  • 1 month later...
ylwgtr2 Grand Master

ylwgtr2

Posted
Posted (edited)

thats because you need driving lessons marcus :rofl:

There really not that bad...i got a quad plate OS in mine and a freind of mine also has a quad plate in his supra and they work well.....If you rest your heel on the floor and hinge your ankle you can take off with no throttle at all....trying to use them without stalling or hopping by bending your knee is almost imposible.....its like trying to use a clutch lever on a motorbike by holding the lever with your fingers and pulling your shoulder back as apposed to using it the proper way by using your fingers to squeeze and release it....try it with hinging your ankle.....i think you will be suprised on how easy they are to use (unless you have a size 6 foot)

Edited by ylwgtr2
Link to comment
https://www.sau.com.au/forums/topic/157154-orc-twin-plates/#findComment-3165255
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted
thats because you need driving lessons marcus :rofl:

There really not that bad...i got a quad plate OS in mine and a freind of mine also has a quad plate in his supra and they work well.....If you rest your heel on the floor and hinge your ankle you can take off with no throttle at all....trying to use them without stalling or hopping by bending your knee is almost imposible.....its like trying to use a clutch lever on a motorbike by holding the lever with your fingers and pulling your shoulder back as apposed to using it the proper way by using your fingers to squeeze and release it....try it with hinging your ankle.....i think you will be suprised on how easy they are to use (unless you have a size 6 foot)

that is exactly what I said to marcus. i have been using os tripple in my GTR. basically I just adjusted the rod so the pick-up is not too far off the floor, then I can easily keep my heel on the floor and only lift it once the clutch is completely engaged. makes it much easier to feel the friction point. :laugh:

Link to comment
https://www.sau.com.au/forums/topic/157154-orc-twin-plates/#findComment-3165268
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      forum.r31skylineclub.com down or gone?

      By niZmO_Man · Posted

      We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • MBS206
      Pillar gauges

      By MBS206 · Posted

      See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • niZmO_Man
      R33 rear seatbelts

      By niZmO_Man · Posted

      bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      Oh, there's also the gearbox crossmember which will probably be different between the small box and the big box, and the wiring loom will probably need to be modified, because the plugs for the switches etc, will probably be different. And I think the speedo on the small box R34s is from somwhere stupid, like the diff, possibly, so you'd need to work out what needs to be done about that (assuming it is different). I think the thing you need to realise is that the front end of that yoke is a large hollow tube with splines on the inside that mates with the splines on the box's output shaft. It is a dedicated thing - not available "aftermarket". They were made to suit that box, by the car's OEM.
×
×
  • Create New...