Jump to content
SAU Community

Hks Evc Vi Boost Controller

Shayde

By Shayde,
in Engines & Forced Induction

 Share

Recommended Posts

Shayde Mentor

Shayde

Posted
Posted

Hey guys,

I recently received a HKS EVC VI (instead of the V I ordered) and have successfully installed it and have it set up to some limited extent (I.e, it reaches peak boost and holds it. I think I was lucky to make it that far).

There are still some features I'd like to be able to tinker with that are listed as features.

Does anyone else have one of these and know what each function in the menus does?

Cheers guys,

Shayde

Link to comment
Share on other sites
Angus Smart Grand Master

Angus Smart

Posted
Posted (edited)

post a photo of your controler. The latest is able to plug in to a laptop i beleive.

they are only up to 5 versions so far

http://www.hks-power.co.jp/products/electr...img/evc-b-2.gif

this bieng the 4th

and this bieng the 5th and current

http://www.hks-power.co.jp/products/electr...g/5_evc_img.jpg

Edited by Angus Smart
Link to comment
Share on other sites
Shayde Mentor

Shayde

Posted
  • Author
Posted

I have this one. However the manual posted in post #2 is a manual for an EVC 4 (according to your post)

even though it was 5 in the file name. I've found this to be consistent in all english manuals I've found.

nengun-1163-00-hks-evc_-_v.jpg

Link to comment
Share on other sites
chook Mentor

chook

Posted
Posted (edited)

installed mine over the past few days, got hold of an english translation for it, ask me any questions, ill try to answer them as i seem to have figured most of it out. Did the full boost mapping, ie throttle vs rpm boost map.

(evc5 in japan, evc6 elsewhere)

http://www.hks-power.co.jp/faq/evc/rekievc.html

found this link, english manual for latest evc :

http://jscosysv.tresham.ac.uk/~awillis/S15...EVC5_Manual.pdf

approx 10mb

Edited by chook
Link to comment
Share on other sites
chook Mentor

chook

Posted
Posted

Can anyone advise me which is the best hose to connect the boost sensor to for a NEO engine, photos would also be great. did mine but the hose goes to some sort of electric solenoid box at the top back of engine, wondering if this would contaminate the pressure levels. thanks

Link to comment
Share on other sites
  • 7 months later...
Black_CSR Rising Star

Black_CSR

Posted
Posted

Hey Guys bought same controller as well... just wondering what u guys have ur setup @ for a RB25det stock Turbo??

E.g. Base Boost 8psi, Option A= 12psi Option B=10psi and Scramble Boost = 14-15Psi for X sec... etc??? Ta

-SeS

Link to comment
Share on other sites
Shayde Mentor

Shayde

Posted
  • Author
Posted

Hey guys, my EVC 6 reads well above my HKS analog gauge, seems to be a normal thing. Mine reads about 3 psi higher. Mines also set up according to the diagram and holds boost very nicely. My only peeve is that it reads the wrong values.

Link to comment
Share on other sites
Black_CSR Rising Star

Black_CSR

Posted
Posted (edited)

Hey Shade do u have a aftermarket BOV??? my plumback return is blocked off cuz of my Bovus Maximus BOV... i'm not sure if that affects it???

Where is ur middle nipple (1) attached on ur Stepping motor.. mine is off the compressor that returns to the Turbo.., Nipple 0 is on the actuator n nipple 3 is off the return line that Tee off the regulator and the plenum... sound about right????

What was ur Initial Setup.. E.g. Max Wastegate boost @???

TA

-SeS

Edited by Black_CSR
Link to comment
Share on other sites
Shayde Mentor

Shayde

Posted
  • Author
Posted

SeS,

Yeah, I have a low mount, internal gate. Aftermarket turbo and BoV. Same block off thing going on. I can't remember exactly without looking and it's cold outside :rofl:

Okay, had a look. First nipple (on the left with the bracket facing backward) goes to actuator on the turbo. Middle nipple goes to intercooler piping. Last nipple on the right goes to the same line that all my boost gauges feed off.

My initial set up.. Just set my max boost to 12psi with boost warning set to 13.5psi and boost drop set to 3psi. All the offsets at 0.

Hope that helps!

Shayde

Link to comment
Share on other sites
Black_CSR Rising Star

Black_CSR

Posted
Posted

My middle nipple doesn't go back to the intercooler nipple cuz it doesn't have one.. but instead it goes back to the compressor line which goes back to the turbo... not sure if that it?

I'll try to get a nipple on my intercooler n hook it up to that.. n c if it makes a difference

Where do u set the boost warning??? the next option after setting up max boost/stable boost is choosing the boost level for option A & B......, where is the boost drop set option???

Ta

-SeS

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 squeaking sound from passenger front area

      By GTSBoy · Posted

      Suspension bush. Got urethane bushes in the upper arms?
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      thanks for heads up on actuators - will sort something as back up or solution as yes dont need that have enough trouble but no doubt some addition of something to spares boxes is required yes have a clue about WTAC but nothing has been officially put out yet so will wait to see exact details Pro class is, has been and will become a draw card for lap records and one off builds for show and thats about it I think - be interesting to see how open they make it Pro am is the old Pro in reality Open class will be split into 2 with slicks and 050's with no doubt slight variances in allowable drivers and changes in aero Clubsprint + apparently a true street class   They have to and are refreshing it all and bringing things up to current standards and need to 100% adhere to rules because whether people like it or not / or say it or not - for alot of competitors it is sheep stations and has been for a while when Im getting told I was illegal because i cut my rear bumper too high and yet others where in the grey areas of legality with everything from engines, suspension, ride heights and more serious influences it actually got quite out of control and heated this year so as much as I may be impacted by some of the changes and prob spit the dummy when I have to spend money changing things I think its a good thing for all
    • SeanR32GtSt
      R34 squeaking sound from passenger front area

      By SeanR32GtSt · Posted

      I can’t tell if it’s suspension related or maybe wheel bearing or motor mount.  IMG_6209.MOV
    • MBS206
      RB30 Struggles from idle

      By MBS206 · Posted

      Start with a multimeter, and see if you're getting power at the TPS. There should be a manual for your car somewhere on these forums and it'll have the info for what closed TPS signal voltage is, and how it should sweep to full throttle. Same as for other sensors / valves.   Have you checked things like your base timing etc? See if anything looks amiss there too?
    • Dose Pipe Sutututu
      Calling all audiophiles

      By Dose Pipe Sutututu · Posted

      here are 2x options to consider: https://www.selby.com.au/price-promise/tonewinner-sw-d6000-subwoofer.html https://www.apollohifi.com.au/svs-pb-3000-ported-subwoofer-black-ash-pre-order.html I'm waiting for a good BF/CM sale and will pull the trigger on a new sub, I do like the SVS PB-3000 (13") but you could nearly buy 2x Tonewinner D6000s (15")
×
×
  • Create New...