Exhaust Manifold Gaskets And Studs.

[WogsRus]

Hi guys,

well my little enoing tick, turned out to be a manifold gasket. I think, two studs were loose. Did these up and tick is better but still there once hot. I have checked everything else, and all apears to be well, not bearing or anythign of that nature.

SO where is the best place to get new studs and gaskets for a good price.

While i am at it, anyone have a low mount manifold to suit stock turbo in the stock position???

Thanks.

[Young GT-R]

since no-one answered I'll throw the name auto-ex in argyle street out there?

[WogsRus]

Thanks Young. Hows life, early start again?

got prices form Nissan, about $160 plus studs for all the gaskets.

Got a guy in USA, whole kit for the entire engine, JDM spec, $150US

[sav man]

I got gaskets and studs for mine from Motor's Nissan.

[WogsRus]

Yeah that is the only place i found that had the gaskets, studs i am getting a kti from SPARKO, all the nuts and bolts $36.

[grandmasterb]

I got gaskets and studs for mine from Motor's Nissan.

Yeah i normally go through NISSAN as well. It is a little more expensive but it saves waiting really and having to deal with customs if bought from the US

Surely u know someone that can get it wholesale old kid???

[WogsRus]

well i might have a mate in Lton, have to wait to return my phonecall.

[grandmasterb]

well i might have a mate in Lton, have to wait to return my phonecall.

Let me know cause i should be able to help

[WogsRus]

Well i rang and no good, looks like my mate is no longer there.

SO GMB, work your magic, i need.

Manifold gasket * 1

turbo to manifold * 1

turbo to dump * 1

watter gaskets for turbo

new copper washers for oil feed lines.

TAAAAA

[guesty]

try bursons in moonah or hobart city. can get overnight not sure on prices. as i only know what it cost staff price. i can get part numbers for you on monday if you want?

[WogsRus]

Hay Questy, if you can get part number that would be great. I did ring them and was told they are not available.

BUT somone else told me they did have them.

Thanks

[guesty]

when you say water gaskets do you mean `the small one that have 1 inch openss and 2 bolt holes oppisite each other?

[guesty]

when you say water gaskets do you mean `the small one that have 1 inch openss and 2 bolt holes oppisite each other?

[extreme turbo manifolds]

i have studs and nuts if you get stuck mate.

12 studs and nuts $24

16 studs and nuts $32

[WogsRus]

yeah i mean the little water one for the turbo and so forth.

Thanks mate

"extreme turbo manifolds" Do you have any of the gaskets available. Also where are you located, i'm in tas, so need freight atherwise.

[extreme turbo manifolds]

yeah i mean the little water one for the turbo and so forth.

Thanks mate

"extreme turbo manifolds" Do you have any of the gaskets available. Also where are you located, i'm in tas, so need freight atherwise.

nah no gaskets sorry man, i just thought id let you know i can get you the studs if you cant anywhere locally at a decent price.

im in wollongong nsw

[Young GT-R]

for the turbo gaskets just make your own, that's what I am going to do.

Bought 700mm x 110mm sheet of gasket material and will use clear film to trace the shapes, cut to shape and transpose onto the gasket material. Wouldn't do that with the exhaust manifold gasket tho, nissan genuine...

[Shane_954]

Dont use anything but a genuine manifold gasket, they are fairly expensive but are worth it in the long run. Go to your local exhaust shop, they usually keep a range of studs and nuts. You will have fun drilling the old studs out too.

[WogsRus]

I haven't managed to snap any as yet, they are all there. I also have a 90 degree drill so all good on the drilling side.

[PHaT MR30]

definately gotta say go genuine nissan. I have both genuine and aftermarket and the genuine is definately much better!

why save money when you'll probably be changing it again in 6 months time