Jump to content
SAU Community

Recommended Posts

Hey guys my brother and i bought this dr30 from queensland in october last year, had to put a new master cylinder in it so at that time i also slapped a hydraulic handbrake in it, the turbo was also rooted so i bought a to4b .60 and 1.15 rear housing, made 179rwks on 11psi but wasn't making any decent boost till well over 4000rpm, so after my first outing in the car it was sold,

I have now just finished putting a stock manifold back on with a rb20det t3. its not going to be a power house but i needed the response back on the cheap so this was the way i did it,

First time drifting i had a shit of a time in it, this time out it should be awesome i have adjustable castor, alot more steering lock and a responsive engine, I also had to change the diff over to a 260z one as i couldn't track one down at all so a few little mods were required to make that fit but all good now.

Any way i'll stop rambling and show some pics

post-10063-1172187661.jpg

post-10063-1172187696.jpg

post-10063-1172187727.jpg

Link to comment
https://www.sau.com.au/forums/topic/157666-new-bloke-saying-hello/
Share on other sites

Welcome from a fellow DR30 owner. That car has certainly done the rounds since its appearance in HPI 18 months ago!

I hope everything runs a bit smoother for you from now on.

cheers

Steve

1984 DR30 RS Turbo Coupe

Welcome from a fellow DR30 owner. That car has certainly done the rounds since its appearance in HPI 18 months ago!

I hope everything runs a bit smoother for you from now on.

cheers

Steve

1984 DR30 RS Turbo Coupe

mother of god dude, the rb20det turbo is smaller than the factory fj20det. The closest match to a factory one is a vg30 unit. The rb turbo wont be making any kind of power and will run out of puff quick.

looks good tho :)

The lag problem with your other turbo is having the excessivly large exhasut housing, you only need a .69 for the kind of power most people need. anything over 1.0ar is 800+hp

mother of god dude, the rb20det turbo is smaller than the factory fj20det. The closest match to a factory one is a vg30 unit. The rb turbo wont be making any kind of power and will run out of puff quick.

looks good tho :(

The lag problem with your other turbo is having the excessivly large exhasut housing, you only need a .69 for the kind of power most people need. anything over 1.0ar is 800+hp

i think what he was saying is he put the RB20 turbo on it because it spooled up faster and reached high boost alot quicker which would make it better for drifting corect me if im wrong

Cheers josh

yeah as above but i also put it on cause a friend had it lying around and was easily accesable, But definatly not aiming for mega power, more a keep the car going and on the track turbo until i decide what i am going to do in regards to a bigger one, all good.

rb20s are stil making 170 or there abouts with boost increase's and aftermarket ecus, this has 550cc injectors and a microtech so i would be aiming around that.

yeah as above but i also put it on cause a friend had it lying around and was easily accesable, But definatly not aiming for mega power, more a keep the car going and on the track turbo until i decide what i am going to do in regards to a bigger one, all good.

rb20s are stil making 170 or there abouts with boost increase's and aftermarket ecus, this has 550cc injectors and a microtech so i would be aiming around that.

remember rb20s maybe making that kind of power but thats on a 6cy.. not a 4cy, you would still have similar boost response with a vg30et turbo. and a hell of alot better mid rance and top end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. a little later but if the topic is here. So...the exhaust is the same and you can use 25/Turbo or any aftermarket? What about intake side? Is it too "plug n play" or? (i do not remember for 100% but i think that one intake to head gasket was little bit different than on the RB25 - i bought gasket kit way back) I know that even if it "plug" those butterfly swirls would cause ECU to be confused or?   Just asking for the info 🙂 and of course the RB25 things are easier to come by  
    • A few more recent pics
    • full send the cnut, do this   fark the wrapping and/or stick on siet. These guys are the ones to go to: https://www.realthermo.com.au/  
    • Just had a look, they don't. Fuelling on the base map is purely alpha-N, and the ignition table is MAP. Remember it's just a base map to get the car moving  
    • Hi everyone, I’m Dave from Canberra. Here's a few pics of my 1992 R32 GTST coupe which I imported back in 2006. Only mods so far are HKS Hi-power cat back exhaust, K&N filter, ATC Volanti steering wheel, Pioneer stereo, amp and sub. This was my daily driver up until 2015 and sadly hasn’t been driven at all in the last 5 years due to marriage, work, and kids taking up most of my time and spare cash.As such its in need of a bit of TLC and one of my goals for this year is to get it back to running condition and maybe look into club/historic rego. I’ve joined SAU so I can ask a few questions along the way (although I promise to google Current Problem +SAU beforehand!)
×
×
  • Create New...