Jump to content
SAU Community

R33 Series 1 Engine Rattle/sound

Ricos

By Ricos,
in Engines & Forced Induction

 Share

Recommended Posts

Ricos Collaborator

Ricos

Posted
Posted

hi guys

had this rattle for a while now but now its really getting on my nerves

when in low revs and in any gear, there is a real "fuzzy/buzzy" type of rattle on the passanger front seat side, sounds like its coming from infront of the glove box. At first i thought it was the pod rattleing against the guard but then i padded the pod up and it still happened so i eliminated that out of the factor.

the sound only happens when driving in low revs in any gear and once u pick up some revs, the sound dissapears.

i thought maybe a gasket? sounds like its coming from somewhere around the turbo

has anyone heard of this as a common problem or have any suggestions on what it could be

cheers

Link to comment
https://www.sau.com.au/forums/topic/158082-r33-series-1-engine-rattlesound/
Share on other sites
tek_01 Proficient

tek_01

Posted
Posted

do u feel it through your pedal? mine vibrates/makes an aweful sound from 2000 to 2500 rpm in 2nd, 3rd and 4th

ive been told its just the clutch out of balance at that sort of rpms so not to worry about it

WPN-O33 Proficient

WPN-O33

Posted
Posted

My car has that same rattle or whatever it is. When it first reared its ugly head i got nervous, but it still does it 3 months on and has been on the dyno for a few hours where it made good power and the tuner didnt comment on it at all....So it cant be that bad i reckon, if it gets annoying just turn the stereo up lol....

jake33 Experienced

jake33

Posted
Posted

maybe its the head shield around the turbo. might have a screw loose and be tapping metal on metal (sorta vibrates on it at low rev). just a thought.. make sure all screws and clamps n stuff are all tightned around that area. if they are, then it probably an iternal thing

Ricos Collaborator

Ricos

Posted
  • Author
Posted

was just concerned cause it comes from the same area as where the turbo is located. It sounds like a vibration like something is vibrating against something else.

it wierd cause it goes away after about 1.5-2k revs.

Strange

rmahnovetsky Proficient

rmahnovetsky

Posted
Posted

Yeah I have exactly the same thing, But I'm sure my comes from the gearbox. As I removed the rubber surrounding from the gear stick and it was crystal clear it came from the gearbox. I notice the sound only happens if my motor is laboring or just off it.

DrewII Community Regular

DrewII

Posted
Posted

mine does the exact same thing. at low revs. i have a twin plate clutch though. theyre tradtionally very noisy things. and its the plates and the disc that sits in the middle thats moving and virbating and making the noise. nothing to be worried about IMO

NSA11N Proficient

NSA11N

Posted
Posted

Make sure the noise isn't coming from the front of your engine....

How many K's has your car done....

Sounds like you may need to replace your cam belt, cam bearings, and seals.....

But yeah, check the black case on front of engine at dizzy

bluey33 Experienced

bluey33

Posted
Posted (edited)

I have the same problem... only loud when engine is cold and sounds like its coming from front of engine (not in the engine) near belt... at low revs aswell.

Sounds like you may need to replace your cam belt, cam bearings, and seals.....

But yeah, check the black case on front of engine at dizzy

sounds like my problem though i wouldnt have a clue...

check the black case on front of engine?

Could you please elaborate? what to look for when im checkin the black case?

Edited by bluey33
Ricos Collaborator

Ricos

Posted
  • Author
Posted

done like 110k

its not coming from the front of the engine. it sounds like the sound is coming from infront of the glove box ,engine pay side (not inside the car :happy:) thats why i suspected my POD was rattling against my guard...but it wasnt that

the sound comes and goes fairly quick its only when the car struggles on low revs

dunno what the hell it is, and its not like i can pop the hood and look in when it makes the noise cause it only happens when moving, does happen on idle or when reving the car in N.

  • 1 month later...
Dazzler22 Rookie

Dazzler22

Posted
Posted

Hey Peeps,

I got a rattle coming from the cam belt cover, a new belt was fitted 2 months ago, is only there when the engine is cold, once she has warmed up it goes,

any ideas what this could be??

(its a 1996 R33 S2 GTS-T)

it is booked in for a service in 2 weeks, (car is under complete warrenty untill september for all parts)

Cheers

Dazzler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • kevboost7
      Magnetic Drain Plug Snapped in Half

      By kevboost7 路 Posted

      Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • MBS206
      New fix for low tyre pressure from bmw

      By MBS206 路 Posted

      Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 路 Posted

      Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • dbm7
      New fix for low tyre pressure from bmw

      By dbm7 路 Posted

      Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 馃槂
    • joshuaho96
      Anyone know this frontpipe?

      By joshuaho96 路 Posted

      You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
脳
脳
  • Create New...