Jump to content
SAU Community

Recommended Posts

If you've got a few spare hours ;-) look through the "Tyres youd use" sticky - no reviews but on page 19 "PSI GTSII" bought some and posted pix. A number of posts have price info. Maybe PM PSI GTSII?

AFAIK the only other similar tyres are the Falken RT-615s, which were a little cheaper when i priced them in August last year.

The Federals aren't a true R rated 'semi', and as said above they are similar to the Falken RT615 with a treadware of approx 200, not 50-60 like the soft R semis slicks.

Motor magazine did a tyre test on these sometime last year in a 235/45-17 size. They said they had a RRP of $200 but that was wrong.

Edited by VHR32

They are definitely a good bang for buck tyre.

Federal are soon to restructure their labelling. The SS595 will be 595. A new entry will be the 595EVO, I am told they will be a touch softer than the 595's. Then there's the semi slick 595RS.

The current SS595's are damn cheap, nothing comes close in performance for the price point. i.e 235/45/17 ~$160-180 per corner. :D

Motor magazine did the test on the SS595's. Not the semi slicks.

I'm trying tp find out if a 245/40/17 on 8" +35 rim will fit under the front guards of a gtst. I don't really like the idea of playing with different aspect/size tyres. All though it would be nice to throw a set of 595RS 255/40/17 on rear 8" rims, they apparently fit 8" rims ok.

SLY33... Have you tried that exhaust manifold yet? :rofl:

http://www.federaltire.com/en/html/product...?DB=motosports#

Ok, 595RS is called a semi slick but it isnt like all the other semi slicks (RE55, A048, DZ02G etc) they have a much harder treadwear of 180 unlike the others.

I'm trying tp find out if a 245/40/17 on 8" +35 rim will fit under the front guards of a gtst. I don't really like the idea of playing with different aspect/size tyres. All though it would be nice to throw a set of 595RS 255/40/17 on rear 8" rims, they apparently fit 8" rims ok.

I wouldn't put a 255/40 on an 8" rim, absolute maximum of 245, preferably 235 or 225 though. 255/40 is nice on a 9" rim.

And I think 245/40R17 on 17x8+35 will fit. It should just clear the upright (I've had 235/40R18 on 18x8 +38 before) and there should be a decent amount of clearance to the guard, will be fine if they're lipped.

Edited by salad

Haha, yeah, look at the tread width, 232mm. Should be a 235!

It is a bit weird though as the Federal SS595 is a very wide tyre. 235/40R18 sits pretty much flush with the rim on a 18x9.

EDIT, just saw section width of 260mm. I spose I have seen 265/35R18 on 18x8, but that was very bulged out.

Thinking back a bit more, I've had 255/40 on a 17x8, and it was the SS595. Was quite bulgy but went on OK.

Edited by salad

Ok I've used these tyres. (Yes the RS version)

595rs.jpg

They are not a true semi-comp in the same catagory as tyres like the RE55, DG02Z, A048, R888 etc.

They are more in the came class as the Falken RT615's.

If you look at the UTQG rating the true R comps are all around the 40-60 mark where as these tyres I think are rated at 180 (615's are 200).

Having said that they were a damn nice tyre to use and I won the Autocross/Motokhana event at DECA in a 100% stock EVO 8MR with those tyres beating modified GT-R's using RE55's etc.

They will last 3-4 times longer than a real R comp but at the track they will be 3-5s per lap slower depending on the track.

These tyres are classed as a street tyre in the SAU VIC club championship - not an R comp tyre.

The 595SS versions are comparable to something like the Hankook 104's.

ss595.jpg

I ran these tyres last night around Barbagello Raceway, and I must admit I was very impressed. Managed to keep 600rwhp on the track, and then I was able to drive them home :nyaanyaa:

If your car isn't a dedicated track car then these seem like a very resonable option.

As another alternative, I am using the Hankook RS2 which is also a semi tyre. The price is alright and the dry grip is excellent but still slightly behind the RT615. When cruising other forums, its hard to find anything negative about the RS2s, especially on EvoM, NASIOC etc.

SLY33... Have you tried that exhaust manifold yet? :(

Hey Cubes, lol, yes the manifold!

As it happens im flying back into Aus on the Sun 25th this month, and the car goes into workshop the very next day. Im only down for a week, so depending on how quick the shop is, i will hopefully get it dynoed by the end of that week. Ill be sure to post up results when its done, hopefully i'll see a bit more than the 281rwkw previously.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...