240rwkw Clutch Kit + Flywheel, Coilpacks, Remap

[CEF11E]

I bought this with my gearbox and did not end up putting it in as I had already bought a 5 puck ceramic. It was fitted to an RB25 that was putting out 300rwkw and was slipping at 300rwkw but not at 240rwkw. it is a full face organic kit. I will include a freshly machined flywheel with it. the clutch only sat behind the RB25 for a week :0

just cleaning up only chasing $150

also have a set of coilpacks to suit RB20DET, RB25DET series 1. excellent condition, came off my engine with 119,000 kms guarantee not to missfire at 13psi. $100

Remap for RB20det with the following mods.

RB20DET, FMIC, GTR pump, 3" exhaust, hiflow turbo. it made 212rwkw and was tuned last year on dyno has perfectly flat AFR. $50

[DJRIFT]

hi cefiie

will the clutch suit an rb20? isnt there a difference between push and pull between the 2??

i may also be interested in the ecu for a mate. i take it that it should run fine even without an aftermarket pump? he has fmic 3" zorst and a steel wheel turbo but i dont think its hiflowed? any thing elce wrong with it?

thanks damo

[mike_a31]

is the remap a ECU or just a chip?

If its full ecu then i'll take it of ur hands for ya.

In perth so PM me bank details and +postage and i'll send money.

[CEF11E]

The ECU is just the chip it goes inside your ECU and will replace the fuel and timing maps.

it is optimised for new fuel pump but will run fine with your existing pump.

Yep the clutch will suit an RB20. it was on a series 1 rb25 but i guarantee it will fit an RB20. as mentioned it comes with flywheel already machined

[KamikazeR33]

nic its just the extra card bit yes?

if so lemme know. id b interested in taking it off ur hands

oh n gimme a wiring loom n other bits while ur there need 2 change over my redtop to silvertop spec

[bubba]

Still got the clutch?