Jump to content
SAU Community

I Can Wobble My Rear Wheels With My Hands

Birth
 Share

Recommended Posts

Birth Experienced

Birth

Posted
Posted

Hi all, I would like some advice.

I have jacked my car up off the ground and found that I can wobble my rear wheel about 5mm by applying fairly slight pressure with my hands on the left and right hand side of the wheel. It does not wobble when I shake it from the top and bottom. Is this normal? Have I got worn bushes? Tyre wear seems normal.

My car is a 1993 R32 GTS4 with stock arms / bushes, GTRGeoff hicas lock bar and whiteline shocks.

I have put a (dodgy) pic of what I mean to help with my explaination.

Thanks,

Ben.

post-28712-1172791431.jpg

WogsRus Veteran

WogsRus

Posted
Posted

sounds like a worn bussh somehere. Go to pedders and get a $14 28 point safety check, that is the best way to pick up problems. After that you can do all the work yourself.

There are a few bushes there, so maybe take the wheel off and have a good look arround. Maybe a ball joint on the lock out bar.

BHDave Grand Master

BHDave

Posted
Posted

combination of old soft rubber bushes front and a flogged out tierod ball joint (or tierod end) rear.

If you remove the rubber boot on the end of the hicas rack and get someone to move the wheel for you it's pretty obvious if the ball joint is shagged. Any movement = borked

gts4diehard Rising Star

gts4diehard

Posted
Posted

it will be combination of the link bushes and the tierods, more likely the tierods. Did you fit the old steering arms to the hicas lock bar?

The rear bushes needs a little movement in them because the hicas is basically compressing the bushes to give the car rear steering.

But you should not feel any movement at all by hand.

First thing I would try is new steering arms (from the hicas lock bar to the tierod end in the hub) as the ball joint might be worn. If that doesn't cure it then you will need to remove the hubs to replace the link bushes in the hubs. Once you see how involved that is you might as well replace the lot, because its not a job you want to do twice!

I replaced the bushes in my hubs, and the steering arms and that tightened up the rear end so that you couldn't feel any movement at all. The next step would have been to replace the bushes in the links themselves to have basically new rear suspension.

The car felt more controlled at high speed into corners after that (on qld raceway), and I think that the Hicas was not in any way detrimental to the cars handling considering that the hicas was now working with components in good condition.

  • 10 months later...
noone Experienced

noone

Posted
Posted

When removing the rear hub assembly did you have to replace many parts

was wondering if i can just unbolt the shafts and the hub assemblys etc

replace tierod /hicas ends in a press then bolt it all back up?

I assume you would have to use a press or maybe a porta power to actually press the tierod /hicas ens out of the hub assembly etc

  • 5 months later...
RB20JT Rising Star

RB20JT

Posted
Posted

sorry mate what are s/h items...my car has done 125000kms...but the guy before me had shopped springs in it..so that would have sped up the wearing out process...

also what do they cost and from where?

Cubes Grand Master

Cubes

Posted
Posted
sorry mate what are s/h items...my car has done 125000kms...but the guy before me had shopped springs in it..so that would have sped up the wearing out process...

also what do they cost and from where?

s/h = second hand.

chopped springs would be unlike to cause damage. Hitting gutters ripple strips etc would. :)

I picked up a complete rack from Wally at Zimports for bugger all can't remember the price but it was under $100.

I recently bought a new steer rack with rod ends as the front left did the same; that cost me $100 for the complete rack and tie rods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • cardre
      App to track mods, repairs etc.

      By cardre · Posted

      Hey everyone, just wanted to let you know about an app I use to track the modifications, repairs, servicing etc I do to my R33 GTR. You might like to use it as well. I'm biased because my son just wrote and released it! But I think you might find it useful to... https://trackmymods.com  
    • cardre
      Proud Dad

      By cardre · Posted

      Hey everyone, been on here for a while, but never introduced myself before. 1st import was a R32 GTS Type M, then R33 GTS, now R33 GTR - each one sold to help pay for the next one. Over the years my son has seen me modify and do changes to my imports and was one of the reasons for him to build an app for car enthusiasts like us. (He can only afford a 2007 Honda at the moment, but he'll get there!) Anyway, bit of a proud Dad moment as he's released an app that I use and you all might like to as well. https://trackmymods.com  
    • Dose Pipe Sutututu
      Dual exhaust questions

      By Dose Pipe Sutututu · Posted

      It will sound tragic and you wished you didn't have 1x exhaust per turbo. There's a reason why most S55 owners change to a single mid pipe.
    • Rezz
      New owner of a Skyline R32 GTS

      By Rezz · Posted

      Echo the comments about the well preserved condition it's in. It has the aero bumper too for extra points. Nice car, and please keep it like that! 🙂
    • GTSBoy
      Dual exhaust questions

      By GTSBoy · Posted

      1. There are no real performance benefits. It sounds different, and as the pipes are not as large diameter you can claw back some undercar clearance or run lower (if that's your thing). 2. Twin pipes, offering exactly the same cross sectional area as a single pipe** will have higher pressure drop - so will not flow as well. That's because there is more surface area of wall per cross sectional pipe area, hence more frictional losses. ** But of course, it is almost impossible to get 2 pipes that are exactly the same XS area as a given typical single pipe. eg, 2x2" is not the same as 1x 3", although it is close. If the 2x pipes add up to less XS area than the single - it will just be flat out worse. If the 2x pipes add up to a bit more than the single, then it might come out as a wash. If the 2x pipes are substantially more XS area than the single, then it will probably flow a little better. 3. No. Why would there be? What have cats got to do with boost creep?*** ***But for f**ks' sake, please run a cat. 4. If you want.
×
×
  • Create New...