Jump to content
SAU Community

Heater Core Leaking

ricsvtr

By ricsvtr,
in Western Australia

 Share

Recommended Posts

ricsvtr Rising Star

ricsvtr

Posted
Posted

Hi guys just wondering if anyone has had their heater core start leaking on them and where abouts you got it fixed? Mine started leaking the other day and Im trying to figure out whether its worth getting a new heater core installed or just bypassing the heater altogether. Ive read in some other posts that the whole dash needs to come out so im thinking its gonna be an expensive job. Does anyone know of a good place in Perth that I could get this sorted out at?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/158881-heater-core-leaking/
Share on other sites
ricsvtr Rising Star

ricsvtr

Posted
  • Author
Posted

Ive just got some quotes to replace the heater.....$1000 - $1200!

Ive heard from another member on SAU that u can replace the heater via the glovebox. The only thing is you have to degas the aircon and disconnect the aircon pipes. Im thinking that doing it this way (even with getting the aircon regassed) will come out considerably cheaper than removing the whole dash. Has anyone else done this?

Stinky Rooster Grand Master

Stinky Rooster

Posted
Posted

Well, I had the heater core in my S1 Stagea replaced (luckily, just before I bought it) and 1 other guy on the Stagea forum did his own and the thing both had in common was coming away from the experience twitchy gibbering messes.....

I realise the dash's are slightly different, but get someone with FAST access to show you the breakdown pic's and you will see what I mean. It takes someone who knows what they are doing 1-2 days min.

negoshi8or Enthusiast

negoshi8or

Posted
Posted
Well, I had the heater core in my S1 Stagea replaced (luckily, just before I bought it) and 1 other guy on the Stagea forum did his own and the thing both had in common was coming away from the experience twitchy gibbering messes.....

I realise the dash's are slightly different, but get someone with FAST access to show you the breakdown pic's and you will see what I mean. It takes someone who knows what they are doing 1-2 days min.

Hey newbie,

1-2 days min? Sorry dude but I disagree with you. I am not a mechanic nor am I clueless with tools but this job took me 3-4 hours at most. I am not boasting but hoping I can convince another forum member save himself $1000.

Ric - dont be worried about doing it! Give it a go! I learnt how to pull out the dash by reading guides on the forum here... there is one with pics on how to remove the dash.

A good 2nd hand core should cost between $100-$120. A brand new one I was quoted (from NatRad I think) was $350. I cant say if Ric's quoted price was including a new one or 2nd hand.

All it comes down to is your own decision.

Peace and out.

Stinky Rooster Grand Master

Stinky Rooster

Posted
Posted
Hey newbie,

1-2 days min? Sorry dude but I disagree with you. I am not a mechanic nor am I clueless with tools but this job took me 3-4 hours at most. I am not boasting but hoping I can convince another forum member save himself $1000.

Ric - dont be worried about doing it! Give it a go! I learnt how to pull out the dash by reading guides on the forum here... there is one with pics on how to remove the dash.

A good 2nd hand core should cost between $100-$120. A brand new one I was quoted (from NatRad I think) was $350. I cant say if Ric's quoted price was including a new one or 2nd hand.

All it comes down to is your own decision.

Peace and out.

I am quite happy to stand corrected :)

I did say that my only experience with this was a Stagea tho....

  • 2 months later...
ricsvtr Rising Star

ricsvtr

Posted
  • Author
Posted (edited)

Hey if anyone is chasing a heater core, radiator or anything to do with your cooling system I really recommend seeing Abbott's Radiators (natrad) in Welshpool. I ran into a few problems when trying to replace my heater core and these guys helped me out a lot, really top blokes.

Oh and also it IS possible to replace the heater core without removing the whole dash.

Cheers!

Edited by ricsvtr
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was ￡307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • sonicii
      V35 Overheat + Coolant Boil & Overflow + Engine not Starting

      By sonicii · Posted

      As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...