Jump to content
SAU Community

Recommended Posts

Just wondering if anyone has one of these things?

Do they operate effectively?

What extactly can you do with a unit that only adjusts 8 points or 500rpm on the AFM signal?

How big are they?

Sorry about all the questions peoples, but I have read that alot of people have these things on their skylines and I was wondering what ll the hype was about?

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/15905-s-afc-questions/
Share on other sites

I got one. I have the 2nd version so you can adjust 12 points at 200rpm increments. Theyre not very big, cbf measuring it up but i'd say about a coke can in dimensions...

Worth the money if u can get one cheap. I got a fair stack of power on my SR20DET cos it was running pig rich before the SAFC fixed things up!!

Link to comment
https://www.sau.com.au/forums/topic/15905-s-afc-questions/#findComment-325490
Share on other sites

I gained 25rwkw by installing one of these SAFC's for $400 plus much better fuel economy. Even though you can only set points at 500rpm it averages out the changes across all revs to make an even curve. Sfitzy, skylines run incredibly rich and this wastes fuel and drains power. By tuning a SAFC you'll get a lot of power! They are pretty small, here's mine: http://www.performance-mod.com/nuke/html/m...ews&new_topic=5

Link to comment
https://www.sau.com.au/forums/topic/15905-s-afc-questions/#findComment-325617
Share on other sites

Just go to www.apexi-usa.com and download the instructions for the original SAFC. The new one is basically the same and you can figure out the new options by urself anyway. Btw, the wiring is exactly the same, besides the additional purple wire which is for the knock sensor!

Link to comment
https://www.sau.com.au/forums/topic/15905-s-afc-questions/#findComment-328656
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
    • Yuh, My new R34 box is sitting on the workshop floor (in its large shipping box, which is a nice thing on its own), along with a front plate to convert to push clutch. There was no way I was interested in rebuilding my existing one. Was only partly interested in the risk of buying a used one. But, if you want a 2nd hander, I can point you to one in/near Melbourne at least. @Komdotkom has one that should be in good enough condition to be usable. I don't think it's in a for sale thread, you'd have to message him. @redzedhas one that definitely needs a rebuild.
×
×
  • Create New...