Jump to content
SAU Community

Recommended Posts

Hi all,

I just recently received a lovely EPA notice in the mail to get my exhaust tested for noise.

I personally didnt think my car was that loud - but it does fail.

The new EPA laws state that the noise needs to be under 90db, including when you back of (the drone/rev down also cannot go over 90db)

I have a R34 4-Door with a Blitz NUR Spec cat back exhaust - what exhausts/options do I have to get her quiet but still let her breath with a good exhaust???

I want to make it a permanent change - not a quick fix just so i can get the EPA off.......

Link to comment
https://www.sau.com.au/forums/topic/159220-need-a-quiet-exhaust-copped-a-epa/
Share on other sites

maybe a resonator would help ..ask your local exhaust shop

yeah that was the first thing I asked....... they said forget about it, it wont help.

I was suprised at that... do resonators make that much of a big difference??

maybe i should get a second opinion ay??? :(

Mine used to be 86db at idle and 106db at 4000rpm or so, and is now 84db at 4000rpm. I got two big arse mufflers put on, still all a 3 inch system tho, and I didnt have too much of a loss of power. So maybe you could get away with a resinator and a big arse muffler. If thats any help.

Cost me about $300 including the db tests.

i also got epa recently...... i put the stock muffler back on.........but seeing u want a permanant fix you would probly need a large oval style rear muffler which u can get in 3 inch strate through.......all those canons are going to be loud.... and geting bigger centre resonator does help abit.......

A resonator after you cat will help a lot. I've got a decent sized resonator (not the hot dog style) and an oval muffler on the end with 3" stainless piping all the way. Although it's never been checked I was told by the exhaust shop that the setup is under the 90dB limit (they said it should be about 88dB). Apparently a cannon muffler would put it just over.

I personally would like it to be a little louder than it is but the whole point of getting it done that way was to avoid attracting any attention to it. I still got a noticeable performance gain and I guess that's the main point of doing the exhaust in the first place :)

Just found this on the Jap Yahoo auctions.

Translated it seems to be a quitening Cat Converter that drops noise by 10db

Wouldn't mind one myself.

Commuting noise an hour each way is getting a little annoying

Slidewize should be able to get you one.

http://page15.auctions.yahoo.co.jp/jp/auction/t29306014

Hi all,

I just recently received a lovely EPA notice in the mail to get my exhaust tested for noise.

I personally didnt think my car was that loud - but it does fail.

The new EPA laws state that the noise needs to be under 90db, including when you back of (the drone/rev down also cannot go over 90db)

I have a R34 4-Door with a Blitz NUR Spec cat back exhaust - what exhausts/options do I have to get her quiet but still let her breath with a good exhaust???

I want to make it a permanent change - not a quick fix just so i can get the EPA off.......

How did the EPA know ur over the limit? Did u get a licky and a noise test done at the pits? Which state is this happening in?

As for ur fix, i'd say replace the Blitz muffler with an oval type one, shame tho coz it'll just restrict flow once again.

How did the EPA know ur over the limit? Did u get a licky and a noise test done at the pits? Which state is this happening in?

As for ur fix, i'd say replace the Blitz muffler with an oval type one, shame tho coz it'll just restrict flow once again.

I got done in my own drive way dude!!!!!

driving home from the gym, i didnt even see them, i get outa my car at home and i see a cop in my driveway...

get this..... im dripping sweat, i have a towel and a bottle of water in my hand, and they still gave me a breath test. As if you'd knock down 6 beers after the gym????

they reckon it was a random check, didnt mention anything else...... a week later.... EPA notice in the mail......

ohh and im in vic by the way.....

Edited by FULOCK

Hey guys, i drive a R32 GTR and i got epa about a month ago..

As my exahust i have a 3 1/2 inch cat back system and the car was way too loud for standard 90 DB, so what i did, i wealded a plate in between the front pipe and the cat....

This has brough me down to 88 DB making me just pass....

But make sure guys when you do this that the plate is propperly wealded to the cat with three 10 mm holse in the plate that you are going to weald also try not to drive the car not over 3 thousand rev's others wise you will blow your exhaust seals...

Guys if you get this and you have to go there, dont go there with just a plate in between, otherwise you will get a $500 FINE!!! at Maclouds

hope to be a help

you can have mine i hate it, i have no idea why anyone would have put it on the car, i can't even hear my engine with the windows up all i can here is the exhaust and the turbo :D its a 5 1/2 HKS superdrager stupid size bottoms out on bloody everything and yes it is all the way through why? i have no clue doesnt seem right to me at all :D dont think it would pass but :worship:

Edited by Woody1

I got done not long ago too! I had a straight through 3" with an oval muffler at the rear. It wasn't really all that loud except for occasional crack and pop! It was 98db and got a mid

muffler box put in and is now 87db but feels like someone stuck a but plug up it!

I have been looking at some of the nifty gadgets A'PEXi have to offer like the 'Active tail silencer'

or that crazy valve you can put in your exhaust. But to get it cleared you will need something

noticeable that they can see, because they take photos from how it was before. Another person i know was actually aloud to put his cannon silencer in before testing..... didn't help him any though.

I have to say the EPA were very professional and helpful.

Also check out the new varex muffler from x-force. It is a muffler that has a valve built in that opens and closes by remote control. When open its a straight through muffler, but when closed it diverts the flow through the sides of the muffler and is much quieter. It was reviewed in autosalon magazone this much, and apparently performed very well. I will be using or at least trialing it on my next car.

in regards to this. has anyone had much too do with those adjustable mufflers that can be set to be straight through, or quiet??? (as seen in several magazines now)

Does anyone have an idea of how loud a 3" turbo back, with sumthing like this (in db - set to its quietest setting) be on say an rb25??

p.s sorry if this is a hijack, although it could also be seen as a possible solution to the problem :P

edit: apoligies, didn't notice the post directly above me :P

Edited by l_uk3y

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • IMG_8641.mov     She doesn’t sound the best but starts with out using any gas now. I just ran some injector cleaner through her. started roughly the first time after adding it but gave it the beans slowly upto 4k, Must have cleaned a few cobwebs out. another step in the right direction for the sub
    • Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • Let's just fix the problem by f**king the rest of the gearbox.
    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
×
×
  • Create New...