Jump to content
SAU Community

Recommended Posts

Well I they are both 1990's. The green one I have owned for a year and a half and havnt had the chance to beat up on it yet. I was going to finish it this past month but I found another one on Yahoo I just couldnt pass up so I might sell the first one or keep it as a spare incase I crash the brown one into the wall drifting :ninja:

Ceffy number 1. Some of the parts are sitting in the trunk waiting for me to throw on. Still needs tune very badly!!!!

Mod's

-RB30DET w/R33 RB25 N/A cyl head. STD cams at this moment :(

-RB25 trans

-GTR PP w/metal clutch 3 puck. Might use a OS twin plate late.

-R33 Clutch master cyl

-R32 brake maser cyl

-GT35R

-RX7 550's injectors

-Greddy oil cooler

-custom relocation kit/lines and thermostat

-Series 2 NEO6 coil's conversion

-HKS 44mm gate

-custom exhaust and intercooler set-up

-Q45 MAF

-Custom eprom tune. Waiting for f-con V pro :mad:

-5 lug conversion F:GTR R:R33 GTS25T

-auto to 5 speed conversion

-floor to hand brake conversion

-S13 subframe.

-All Hicas gone!!!

-Zeal super function coilovers 8k 10k for now. Some pre load.

-TC rods

-steering spacer

-alum sub frame spacers

-FNOR1 F:17"X10" R: 17"X8" Got some P1 17"X9" 215 for front for the drifto.

-Front sway pillow joints, adj.

-Recaro solid bucket

-Spin knob

-Blitz oil press

-Blitz water temp

-280km Nismo speedo

-R32 clutch and brake peddles

-momo wheel w/spacer

-Nismo shift knob

-Quick shift shifter

Plans for the next few months: Have most the parts, just have to get it done.

-GTR shimmed diff/axles convesion

-AP racing calipars/rotors up front

-get tune with 450whp. Limited from injectors. I will see how I like it then will prob upgrade to larger set

-Sway bars

-Cusco RUCA's

-Tie rod spacers, Jic tie rods

-Hicas rack

-finish welding

-Cusom strut bars and chassies bracing

-Lighten this bitch up

p1030077sw3.jpg

p1030076ue5.jpg

p1030078gb8.jpg

Ceffy number 2: Loading the container this month and should be burning rubber in another 6 weeks or so :P Got a guy close to me that really knows his v-pros so I should have this running like a new luxus.

Mod's:

-R33 RB26DETT

-HKS GT-SS Turbo’s

-R33 GTR N1 oil pump

-HKS F-con V pro

-No AFM

-HKS boost controller 1.1 Low 1.4 high

-GTR FMIC w/custom alum piping

-Trust 2 layer alum radiator

-Trust electric fan X2

-Trust 15 layer oil cooler w/filter relocation

-Aftermarket exhaust.

-Aftermarket down pipe

-Aftermarket air filters

-GTR fuel pump

-OS cross-mission 1st-3rd gear

-Nismo carbon clutch R33

-Nismo light flywheel

-“Bolltech??” 2-way LSD. Not sure of exact brand. Confusion in translation

-Autometer oil temp, water temp, boost, oil pressure and tachometer

-Greddy electric fan controller

-Bride Brix driver seat

-Shift knob

-Nardi steering wheel

-CD player and speakers or some sort

-Tire Advan Neova. F: 235/40/R17 R: 245/40/R17

-Cusco comp Zero. 5 way adj Coilovers

-Front T/C rods

-Cusco rear RUCA’s

-Hicas canceled

-R33 GTR Brembo brakes, front and rear w/5 lug conversion

-Cusco front strut bar

-Full aero body

-Dark Brown purl

cefiro3gj7.jpg

cefiro2or5.jpg

cefiro6gs2.jpg

cefiro1cb6.jpg

cefiro4zj3.jpg

Link to comment
https://www.sau.com.au/forums/topic/159568-my-ceffies/
Share on other sites

Well look who it is...this is great, Canadians on a Aus site, lol. Those whips are lookin fine! To bad your in Edmonton now, makes it a little harded to do a cefiro cruze. I can't wait to see them out.

I should get pic going for my car...I have the engine out and I'm prepping the bay for stitch welding and paint.

Link to comment
https://www.sau.com.au/forums/topic/159568-my-ceffies/#findComment-2962495
Share on other sites

HE HAS THE PASENGER SIDE AIR VENT COVER !!!!!!!!!!!!!!!!!!!!

i got one for free from mates wrecked ceffy last week

mwahahaqhaha

mr canadian - can i have your drivers side square thingy on the dash just near the windscreen... it does something... it connects to climate control i think... possibly in cabin sensor?

btw i notice you have pillowball swaybar links... are they jic? where you get them from? give me details!

Edited by Hella Flush
Link to comment
https://www.sau.com.au/forums/topic/159568-my-ceffies/#findComment-2963768
Share on other sites

i got one for free from mates wrecked ceffy last week

mwahahaqhaha

mr canadian - can i have your drivers side square thingy on the dash just near the windscreen... it does something... it connects to climate control i think... possibly in cabin sensor?

btw i notice you have pillowball swaybar links... are they jic? where you get them from? give me details!

Not exactly sure of what your talking about.

Not sure on the sway links. A Brazilian friend smashed his Silvia and striped it and I noticed he left the links cuz I was wrecking the car for him so it was a freebee. I was going to make some with QA1 parts but still not sure if its worth it. Prob best to just fork out the coin and get some good sways I guess :)

I’m not a fan of the FNO1RC's at all. They were cheap as chips and had good rubber and they fit better than a standard wheel. I also needed something in 5 lug and this option came to me. Id like to change to something else but for this year I just want to have fun and race it so rims are going to be swapped very often for battle unit rims.

As for the RB30's, I got a friend in ausi that sent a bunch to a business partner in Japan and I met him there and we built one together. He set me up with another pallet of them for Canada. Not big sellers here tho.Canadians are pussies!!!! They rather build RB24's for twice the money so I got to show people what they are missing out on.

In canada we still have a 15 year rule so its easy as pie to get them in. Transport canada is changing this im thinking within the next 6 months or so. They are not even giving us a chance for compliances so this is why im getting the cars I want before it gets harder and more expensive to get them in.

Edited by RB30 Ceffy
Link to comment
https://www.sau.com.au/forums/topic/159568-my-ceffies/#findComment-2964855
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...